journal article·2026-01Open access

Integration of DEM-based microstructure generation with FEM and RNM simulations for evaluating ionic conductivity in composite cathodes of all-solid-state batteries

Ali Mohammad Bazzoun, Javid Piruzjam, Steffen Hink, Lukas Rubacek, Alexander Fill, Kai Peter Birke

Abstract

Cathode microstructure critically governs ionic transport in composite cathodes for all-solid-state batteries (ASSBs). In this study, we present a simulation framework that integrates Discrete Element Method (DEM)-based microstructure generation with Finite Element Method (FEM) and Resistor Network Modeling (RNM) to analyze the effective ionic conductivity σ eff,ion within the solid electrolyte (SE) phase. The framework enables quantitative evaluation of SE network connectivity and transport pathways across realistic 3D microstructures. Both FEM and RNM models were validated against experimental impedance data for composite cathodes with varying active material fractions ( f CAM = 70 – 80 wt.% ), demonstrating strong agreement and consistent trends. RNM reproduced FEM results with significantly reduced computational cost, making it suitable for high-throughput parametric studies. Systematic investigations revealed that decreasing the mean SE particle size ( D ¯ SE ) enhances σ eff,ion by increasing SE utilization ( θ SE ) and coordination number ( Z SE−SE ), despite higher individual contact resistances ( R ̄ SE−SE ). Increasing compaction pressure further improves transport by densifying particle contacts, though gains diminish beyond 400 MPa. These results establish the DEM–FEM–RNM framework as an efficient and predictive tool for linking processing, microstructure, and ionic transport in ASSB cathodes, providing a foundation for microstructure-informed electrode design and future electrochemical performance modeling. • DEM, FEM, and RNM combined to model SE transport in cathodes. • FEM and RNM validated using experimental conductivity data. • RNM is accurate, efficient, and pressure/convergence sensitive. • SE size and pressure impact percolation and contact quality. • Network metrics reveal structure–property relationships.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. A solid future for battery development
2. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
3. Perspectives on the design of high-performance li-ion battery cathodes
4. Sulfide solid electrolyte with favorable mechanical property for all-solid-state lithium battery10.1038/srep02261 ↗
5. Challenges in speeding up solid-state battery development10.1038/s41560-023-01208-9 ↗
6. Recent progress and perspectives on designing high-performance thick electrodes for all-solid-state lithium batteries10.1016/j.etran.2021.100152 ↗
7. Effects of conductive additives in composite positive electrodes on charge-discharge behaviors of all-solid-state lithium secondary batteries10.1149/1.1939633 ↗
8. Eliminating the detrimental effects of conductive agents in sulfide-based solid-state batteries10.1021/acsenergylett.0c00256 ↗
9. All-solid-state batteries with slurry coated LiNi0.8Co0.1Mn0.1O2 composite cathode and Li6PS5Cl electrolyte: Effect of binder content10.1016/j.jpowsour.2018.04.069 ↗
10. Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach10.1016/j.ensm.2019.05.033 ↗
11. Transport and mechanical aspects of all-solid-state lithium batteries
12. Quantifying the impact of charge transport bottlenecks in composite cathodes of all-solid-state batteries10.1149/1945-7111/abf8d7 ↗
13. High active material loading in all-solid-state battery electrode via particle size optimization
14. Fabrication of composite positive electrode sheet with high active material content and effect of fabrication pressure for all-solid-state battery10.2109/jcersj2.16321 ↗
15. Percolation behavior of a sulfide electrolyte–carbon additive matrix for composite cathodes in all-solid-state batteries10.3390/batteries9120595 ↗
16. Analysis of interfacial effects in all-solid-state batteries with thiophosphate solid electrolytes10.1021/acsami.9b21404 ↗
17. Three-dimensional structural measurement and material identification of an all-solid-state lithium-ion battery by X-ray nanotomography and deep learning
18. Effect of Young’s modulus of active materials on ion transport through solid electrolyte in all-solid-state lithium-ion battery
19. Visualizing the impact of the composite cathode microstructure and porosity on solid-state battery performance10.1149/1945-7111/ad510e ↗
20. Sheet-type all-solid-state batteries with sulfidic electrolytes: Analysis of kinetic limitations based on a cathode morphology study
21. Modeling effective ionic conductivity and binder influence in composite cathodes for all-solid-state batteries10.1021/acsami.9b22788 ↗
22. Microstructural modeling of composite cathodes for all-solid-state batteries10.1021/acs.jpcc.8b11043 ↗
23. Kinetics or transport: Whither goes the solid-state battery cathode?10.1021/acsami.2c04962 ↗
24. Digital twin-driven all-solid-state battery: Unraveling the physical and electrochemical behaviors
25. Optimizing the composite cathode microstructure in all-solid-state batteries by structure-resolved simulations
26. Simulating solid-state battery cathode manufacturing via wet-processing with resolved active material geometries10.1016/j.ensm.2024.103747 ↗
27. A discrete numerical model for granular assemblies10.1680/geot.1979.29.1.47 ↗
28. Investigating electrode calendering and its impact on electrochemical performance by means of a new discrete element method model: Towards a digital twin of li-ion battery manufacturing
29. Modeling the electrical conductive paths within all-solid-state battery electrodes
30. Simulation of fabrication and degradation of all-solid-state batteries with ductile particles10.1149/1945-7111/abed23 ↗
31. Effect of mold pressure on compaction and ion conductivity of all-solid-state batteries revealed by the discrete element method
32. Simulation of the compaction of an all-solid-state battery cathode with coated particles using the discrete element method
33. Parameter sensitivity analysis and calibration of a discrete element model for optimizing all-solid-state-battery cathode microstructures10.1016/j.electacta.2025.146536 ↗
34. Effect of particle size and pressure on the transport properties of the fast ion conductor t-Li7SiPS810.1002/aenm.202203873 ↗
35. Pressure dependence of solid electrolyte ionic conductivity: A particle dynamics study10.1021/acsami.3c01279 ↗
36. Discrete modelling of the electrochemical performance of SOFC electrodes10.1016/j.electacta.2006.05.018 ↗
37. A micromechanical model for effective conductivity in granular electrode structures10.1007/s10409-013-0070-x ↗
38. Modeling the effective conductivity of the solid and the pore phase in granular materials using resistor networks10.1016/j.powtec.2019.04.005 ↗
39. Discrete element model for effective electrical conductivity of spark plasma sintered porous materials10.1007/s40571-024-00773-4 ↗
40. An electro-mechanical contact model for particulate systems10.1016/j.powtec.2024.119759 ↗
41. Using resistor network models to predict the transport properties of solid-state battery composites10.1038/s41467-025-56514-5 ↗
42. Tailored cathode composite microstructure enables long cycle life at low pressure for all-solid-state batteries10.1021/acsenergylett.4c03256 ↗
43. Grid indentation analysis of mechanical properties of composite electrodes in Li-ion batteries10.1016/j.eml.2016.03.002 ↗
44. 2025
45. 2001
46. Ion transport limitations in all-solid-state lithium battery electrodes containing a sulfide-based electrolyte10.1016/j.jpowsour.2018.05.095 ↗
47. Linking solid electrolyte degradation to charge carrier transport in the thiophosphate-based composite cathode toward solid-state lithium-sulfur batteries
48. Efficient cell design and fabrication of concentration-gradient composite electrodes for high-power and high-energy-density all-solid-state batteries10.4218/etrij.2019-0176 ↗
49. Mathematical solutions of comprehensive variations of a transmission-line model of the theoretical impedance of porous electrodes10.1016/j.electacta.2015.02.065 ↗
50. Kloss · 2014
51. Models, algorithms and validation for opensource DEM and CFD–DEM10.1504/PCFD.2012.047457 ↗
52. An improved integral non-linear model for the contact of particles in distinct element simulations10.1016/j.ces.2004.10.004 ↗
53. A review of conduction phenomena in Li-ion batteries10.1016/j.jpowsour.2010.06.060 ↗
54. Critical time step for DEM simulations of dynamic systems using a Hertzian contact model10.1002/nme.6056 ↗
55. Elastic properties of alkali superionic conductor electrolytes from first principles calculations10.1149/2.0061602jes ↗
56. Recycling Krylov subspaces for sequences of linear systems10.1137/040607277 ↗
57. Impact of the solid electrolyte particle size distribution in sulfide-based solid-state battery composites