Balanced water management and mass transport with hierarchically structured gas diffusion layers in fuel cells
Source abstract
Abstract
The key to improving water management and fuel cell performance is to enhance the efficiency of mass transport and establish a fast and direct way to remove the product water from the gas diffusion layer (GDL). In this study, three baseline GDLs with uniform, gradient, and segmented porosity are investigated with computational methods. We utilised a stochastic reconstruction process to create three different GDLs (segmented, gradient, uniform), enabling analysis of the impact of their micro-structures on various surface properties, gas diffusion, electrical conductivity, and two-phase flow phenomena. The simulation results demonstrate that compared to the uniform GDL, the gradient and segmented GDL exhibit optimal surface properties which positively impacts the contact resistance between the GDL and the catalyst layer and enhances the in-plane transport characteristics. However, their water management and transport properties in the through-plane direction require further optimisation. Additionally, the impact of bipolar plates on the behaviour of liquid water near the channels and lands is also taken into account. To further improve the water removal and reactants supply efficiency, patterned through-holes along the through-plane direction inside the GDL are proposed. Our analysis suggests that the GDL, featuring a porosity gradient with through-holes positioned exclusively beneath the flow channel, exhibits the most balanced interfacial contact, mass transport characteristics and effective water management. The findings of this study provide valuable insights for the design of GDLs to optimise the transport of gas, and electrons, as well as the liquid water distribution, thereby enhancing the performance and efficiency of fuel cell systems. It is important to note that the insights gained from this study are not limited to GDLs alone but can also be applied to various porous media, including porous transport layers. • Three baseline GDLs with various porosity distributions are designed numerically. • Surface characteristics, transport properties, and two-phase flow behaviours are analysed. • The impact of flow channels on water transport is considered. • Various through-hole arrangements are incorporated to further enhance water management.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Different approaches to reducing aviation emissions: reviewing the structure-agency debate in climate policy10.1007/s44168-022-00001-w ↗
2. Are sustainable aviation fuels a viable option for decarbonizing air transport in Europe? An environmental and economic
3. A review of cell-scale multiphase flow modeling, including water management, in polymer electrolyte fuel cells10.1016/j.apenergy.2016.08.010 ↗
4. Review on microstructure modelling of a gas diffusion layer for proton exchange membrane fuel cells10.1016/j.rser.2016.11.235 ↗
5. Accelerating bubble detachment in porous transport layers with patterned through-pores10.1021/acsaem.0c01239 ↗
6. Measurement of contact angles at carbon fiber-water-air triple-phase boundaries inside gas diffusion layers using X-ray computed tomography10.1021/acsami.1c00849 ↗
7. Effects of the surface structure on the water transport behavior in PEMFC carbon fiber papers10.1021/acsomega.1c06304 ↗
8. Numerical and microfluidic pore networks: towards designs for directed water transport in GDLs10.1016/j.electacta.2008.03.078 ↗
9. Effective transport properties for polymer electrolyte membrane fuel cells – with a focus on the gas diffusion layer10.1016/j.pecs.2012.07.002 ↗
10. 3D experimental visualization of water flooding in proton exchange membrane fuel cells10.1016/j.energy.2019.03.128 ↗
11. Liquid water visualization in PEM fuel cells: a review10.1016/j.ijhydene.2009.02.084 ↗
12. Gradient catalyst layer design towards current density homogenization in PEM water electrolyzer with serpentine flow field10.1016/j.enconman.2024.118659 ↗
13. Impact of gas diffusion layer spatial variation properties on water management and performance of PEM fuel cells10.1016/j.enconman.2020.113579 ↗
14. Designing tailored gas diffusion layers with pore size gradients via electrospinning for polymer electrolyte membrane fuel cells10.1021/acsaem.9b02371 ↗
15. Effects of porosity gradient in gas diffusion layers on performance of proton exchange membrane fuel cells10.1016/j.energy.2010.09.011 ↗
16. Numerical investigation of multi-layered porosity in the gas diffusion layer on the performance of a PEM fuel cell10.1016/j.ijhydene.2020.05.218 ↗
17. Effects of compression and porosity gradients on two-phase behavior in gas diffusion layer of proton exchange membrane fuel cells
18. Effect of porosity gradient in cathode gas diffusion layer of polymer electrolyte membrane fuel cells on the liquid water transport using lattice boltzmann method10.1177/0957650920934312 ↗
19. Pore-scale investigation of water-gas transport in reconstructed gas diffusion layers with binder and polytetrafluoroethylene coating10.1016/j.jpowsour.2024.234819 ↗
20. Laser structured gas diffusion layers for improved water transport and fuel cell performance10.1021/acsaem.1c02454 ↗
21. Synchrotron radiography and tomography of water transport in perforated gas diffusion media10.1016/j.jpowsour.2013.02.014 ↗
22. Modeling of two-phase behavior in the gas diffusion medium of PEFCs via full morphology approach10.1149/1.2472547 ↗
23. Predicting the topological and transport properties in porous transport layers for water electrolyzers10.1021/acsami.3c12345 ↗
24. Pore scale simulation of transport and electrochemical reactions in reconstructed PEMFC catalyst layers10.1149/1.3478207 ↗
25. Using an ILU/Deflation preconditioner for simulation of a PEM fuel cell cathode catalyst layer10.4208/cicp.180412.301012a ↗
26. Pore-scale modeling of gas diffusion layers: effects of compression on transport properties
27. The MPI message passing interface standard
28. Investigating the validity of the Bosanquet formula for estimation of diffusivities in mesopores10.1016/j.ces.2011.11.026 ↗
29. Multiple-relaxation-time lattice-Boltzmann model for multiphase flow10.1103/PhysRevE.71.036701 ↗
30. An investigation of water-gas transport processes in the gas-diffusion-layer of a PEM fuel cell by a multiphase multiple-relaxation-time lattice Boltzmann model10.1016/j.jpowsour.2007.05.081 ↗
31. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
32. Advanced electrode structures for Proton exchange membrane fuel cells: current status and path forward10.1007/s41918-023-00208-3 ↗
33. Analysis of the MPL/GDL interface: impact of MPL intrusion into the GDL substrate10.1149/1945-7111/acfa26 ↗
34. Impact of GDL hole on chemo-mechanical membrane degradation investigated by 4D in-Situ visualization10.1149/MA2023-02371780mtgabs ↗
35. Ex-situ measurement of properties of gas diffusion layers of PEM fuel cells10.1016/j.egypro.2012.09.057 ↗
36. Computational analysis of gas transport in fuel cell catalyst layer under dry and partially saturated conditions10.1149/2.0081907jes ↗
37. Sabharwal · 2019
38. The effects of porosity distribution variation on PEM fuel cell performance10.1016/j.renene.2004.11.017 ↗