journal article·2025-10Open access

Promising properties of a novel low-cost negative electrode material Li3FeN2 for Li ion batteries

Y. Zhou, N. Emery, E. Panabière, J.P. Pereira-Ramos, R. Baddour-Hadjean

Abstract

Nitride materials offer a promising chemistry for alternative anode materials in Li-ion batteries, yet limited efforts have been made in this field. This work investigates the electrochemical activity of Fe 3+ /Fe 4+ redox couple in the lithiated iron nitride Li 3 FeN 2 , positioning Li 3 FeN 2 as a new high-capacity and low-cost anode for Li-ion batteries. The best synthesis conditions have been developed at 750°C under nitrogen flow and mastering the particle size of iron precursor around 1 µm has been revealed as the key point. Orthorhombic shaped Li 3 FeN 2 crystals with 5-10 μm length, 2 μm width are obtained. Despite a complex delithiation-lithiation process involving four phases, Li 3 FeN 2 demonstrates an attractive initial discharge capacity of 250 mAh g⁻ ¹ near 1.2 V at C/10 within the 1.6 V-0.9 V range. The capacity retention limited to 83-87% over 80 cycles depending on the C rate, has been improved to 89-97% when the upper cutoff voltage is lowered from 1.6 V to 1.5 V. The cycling properties of Li 3 FeN 2 are discussed in terms of rate capability, cycling limits and ageing time in the charged state. With a stable capacity of 180 mAh g -1 , 140 mAh g⁻ ¹ and 110 mAh g⁻ ¹ at C/10, C/2 and 1C, respectively, available at 1.2 V, Li 3 FeN 2 could compete the benchmark Li 4 Ti 5 O 12 anode operating 300 mV higher than Li 3 FeN 2 . Further research is required to understand and solve the capacity loss observed during the first two cycles and to take into account the possible Fe 4+ instability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Zero‐Strain insertion material of Li [ Li1/3Ti5/3]O4 for rechargeable lithium cells10.1149/1.2048592 ↗
2. Porous Li4Ti5O12 coated with n‐doped carbon from ionic liquids for li‐ion batteries10.1002/adma.201003294 ↗
3. Critical role of the crystallite size in nanostructured Li4Ti5O12 anodes for lithium-ion batteries10.1021/acsami.8b05057 ↗
4. Li4Ti5O12 spinel anodes10.1038/s41560-021-00829-2 ↗
5. Inorganic materials for the negative electrode of lithium-ion batteries: state-of-the-art and future prospects10.1016/S0927-796X(02)00125-0 ↗
6. Recent findings and prospects in the field of pure metals as negative electrodes for Li-ion batteries10.1039/b705421c ↗
7. Research progress on negative electrodes for practical Li-Ion batteries: beyond carbonaceous anodes10.1002/aenm.201402225 ↗
8. Metal oxides and oxysalts as anode materials for Li ion batteries10.1021/cr3001884 ↗
9. Search for new anode materials for high performance Li-Ion batteries10.1021/acsami.1c25262 ↗
10. Li deintercalation-intercalation reaction and structural change in lithium transition metal nitride, Li7MnN410.1149/1.2059266 ↗
11. Ball-milled Li7MnN4: an attractive negative electrode material for lithium-ion batteries10.1016/j.electacta.2013.03.012 ↗
12. A kinetic study of electrochemical lithium insertion in Li7MnN4 by impedance spectroscopy10.1016/j.jallcom.2015.12.121 ↗
13. Synthesis and electrochemical studies of a new anode material, Li3-xCoxN10.1016/0167-2738(95)00221-9 ↗
14. Electrochemical studies of a new anode material, Li3-xMxN (M=Co, Ni, Cu)10.1016/S0378-7753(96)02557-8 ↗
15. Study of Li3-xMxN (M: co, Ni or Cu) system for use as anode material in lithium rechargeable cells10.1016/0167-2738(96)00174-9 ↗
16. Anode performance of a new layered nitride Li3-xCoxN (x = 0.2 - 0.6)10.1016/S0378-7753(97)02597-4 ↗
17. Reaction mechanisms of Li2.6Co0.4N anode material10.1016/S0167-2738(99)00038-7 ↗
18. A novel lithium intercalation compound based on the layered structure of lithium nitridonickelates Li3-2xNixN10.1016/j.electacta.2007.05.037 ↗
19. Layered lithium cobalt nitrides: a new class of lithium intercalation compounds10.1016/j.jpowsour.2007.09.052 ↗
20. Comparison of the electrochemical properties of metallic layered nitrides containing cobalt, nickel and copper in the 1 V - 0.02 V potential range10.1016/j.elecom.2007.07.022 ↗
21. Li2.0Ni0.67N, a promising negative electrode material for Li-Ion batteries with a soft structural response10.1021/acs.inorgchem.7b01903 ↗
22. Kinetic insights into LixNi0.67N (1.67 ≤ x ≤ 2.17), a quasi “zero-strain” negative electrode material for Li-ion battery10.1016/j.jpowsour.2022.231778 ↗
23. High rate performance of lithium manganese nitride and oxynitride as negative electrodes in lithium batteries10.1016/j.elecom.2009.12.027 ↗
24. Ball-milled Li7MnN4: an attractive negative electrode material for lithium-ion batteries10.1016/j.electacta.2013.03.012 ↗
25. In operando X-ray diffraction study of Li7MnN4 upon electrochemical Li extraction-insertion: a reversible three-phase mechanism10.1016/j.jpowsour.2013.08.008 ↗
26. Unravelling redox processes of Li7MnN4 upon electrochemical Li extraction-insertion using operando XAS10.1039/C7CP05207C ↗
27. Li deintercalation and structural change in the lithium transition metal nitride Li3FeN210.1006/jssc.1994.1360 ↗
28. Unidimensional unit cell variation and Fe+3/Fe+4 redox activity of Li3FeN2 in Li-ion batteries10.1016/j.jallcom.2016.12.045 ↗
29. Chemical stability of layered lithium cobalt nitrides in air10.1016/j.corsci.2012.01.032 ↗
30. Investigation of the chemical stability of Li7MnN4 in air10.1016/j.corsci.2013.07.027 ↗
31. Larson · 2000 · 231
32. EXPGUI , a graphical user interface for GSAS10.1107/S0021889801002242 ↗
33. Li3FeN2, a ternary nitride with chains: crystal structure and magnetic properties10.1016/0022-5088(90)90311-7 ↗
34. Structural reinvestigation of Li3FeN2: evidence of cationic disorder through XRD, solid-state NMR and Mössbauer spectroscopy10.1016/j.jpcs.2016.03.016 ↗
35. Li4[FeN2]: a Nitridoferrate(II) with anions isosteric with CO2. A defect variant of the Li3N type structure10.1002/anie.199101991 ↗
36. Layered lithium iron nitride: a promising anode material for Li-ion batteries [3]10.1021/ja0112745 ↗
37. Large orbital moments and internal magnetic fields in lithium nitridoferrate(I)10.1103/PhysRevLett.88.207202 ↗
38. Direct solid-state synthesis and large-capacity anode operation of Li3-xFexN10.1039/c0jm03735d ↗
39. Volume changes of graphite anodes revisited: a combined operando X-ray diffraction and in situ pressure analysis Study10.1021/acs.jpcc.8b01873 ↗
40. Synthesis and electrochemical properties of nanosized LiFeO2 particles with a layered rocksalt structure for lithium batteries10.1016/j.materresbull.2011.09.024 ↗
41. Synthesis of tetrahedral LiFeO2 and its behavior as a cathode in rechargeable lithium batteries10.1021/ja077651g ↗
42. Structural change and capacity loss mechanism in orthorhombic Li/LiFeO2 system during cycling10.1016/S1388-2481(03)00118-8 ↗
43. Low temperature synthesis and electrochemical characteristics of LiFeO2 cathodes10.1016/S0378-7753(96)02579-7 ↗
44. Structural properties and electrochemistry of α-LiFeO210.1016/j.jpowsour.2011.09.054 ↗
45. New insights into the performance degradation of Fe-Based layered oxides in sodium-ion batteries: instability of Fe3+/Fe4+ redox in α-NaFeO210.1021/acs.chemmater.5b02918 ↗
46. Interfacial strategies for suppression of Mn dissolution in rechargeable battery cathode materials10.1021/acsami.1c20406 ↗
47. Inorganic electrolyte additives to suppress the degradation of graphite anodes by dissolved Mn(II) for lithium-ion batteries10.1016/S0378-7753(03)00224-6 ↗