Reuse of spent electric vehicle battery by using liquid immersion method
Source abstract
Abstract
Electric vehicle (EV) batteries are reused in low-power demand fields such as energy storage system (ESS), even after their lifespan ends. However, the potential chances of fire may result from dependence on not employing proper thermal management for reuse modules. Therefore, this study proposes applying a water immersion system for pouch-type reuse modules. This system exhibited fire prevention capabilities during emergencies and superior thermal management performance during regular operations owing to the high thermal conductivity and specific heat of water. Particularly for pouch-type batteries, this study aims to provide insights into broadening the selection of immersion fluids, including electrically conductive substances such as water, instead of using dielectric fluids. We examined the impact on the thermal stability of the modules based on various design variables. The results showed the possibility of designing a water immersion module with an energy density of 204.2 WhL-1 by minimizing volume for thermal management purposes alone. However, a minimum 15 mm cell spacing is required to ensure the safety of thermal runaway (TR), allowing for an energy density of 179.7 WhL-1. This study anticipates the effective utilization of liquid immersion systems, prioritizing thermal stability over battery weight and volume. Particularly in ESS applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Extraction and Separation Processes · Advanced Battery Technologies Research · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Recycling lithium-ion batteries from electric vehicles10.1038/s41586-019-1682-5 ↗
2. Lithium battery reusing and recycling: a circular economy insight10.1016/j.heliyon.2019.e01866 ↗
3. Evaluation of the end-of-life of electric vehicle batteries according to the state-of-health10.3390/wevj10040063 ↗
4. Toward sustainable reuse of retired lithium-ion batteries from electric vehicles10.1016/j.resconrec.2020.105249 ↗
5. Comparing different thermal runaway triggers for two automotive lithium-ion battery cell types10.1149/1945-7111/abbe5a ↗
6. Bower
7. Tracy
8. Recent progress in lithium-ion battery thermal management for a wide range of temperature and abuse conditions10.1016/j.ijhydene.2022.01.008 ↗
9. Liquid cooling based on thermal silica plate for battery thermal management system10.1002/er.3801 ↗
10. Lithium-ion battery thermal safety by early internal detection, prediction and prevention
11. Active cell balancing in battery packs
12. Experimental investigation on heat pipe cooling for hybrid electric vehicle and electric vehicle lithium-ion battery10.1016/j.jpowsour.2014.04.130 ↗
13. Battery thermal models for hybrid vehicle simulations10.1016/S0378-7753(02)00200-8 ↗
14. Experimental investigation of thermal performance of large-sized battery module using hybrid PCM and bottom liquid cooling configuration10.1016/j.applthermaleng.2019.113968 ↗
15. Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin10.1016/j.applthermaleng.2011.11.001 ↗
16. Thermal performance of cylindrical lithium-ion battery thermal management system integrated with mini-channel liquid cooling and air cooling10.1016/j.applthermaleng.2020.115331 ↗
17. Structural optimization of lithium-ion battery for improving thermal performance based on a liquid cooling system10.1016/j.ijheatmasstransfer.2018.10.074 ↗
18. Immersion cooling for lithium-ion batteries–A review10.1016/j.jpowsour.2022.231094 ↗
19. Optimization of liquid cooling and heat dissipation system of lithium-ion battery packs of automobile10.1016/j.csite.2021.101012 ↗
20. Zero fire battery concept: water-in-battery10.1039/D1TA10896D ↗
21. Gopinadh · 2022
22. Antony, & P.P. Subha (Eds.), Energy Harvesting and Storage. Energy Systems in Electrical Engineering. Singapore: Springer.
23. In situ measurement of orthotropic thermal conductivity on commercial pouch lithium-ion batteries with thermoelectric device10.3390/batteries6010010 ↗
24. Numerical analysis of single-phase liquid immersion cooling for lithium-ion battery thermal management using different dielectric fluids10.1016/j.ijheatmasstransfer.2022.122608 ↗
25. Multi-domain modeling of lithium-ion batteries encompassing multi-physics in varied length scales10.1149/1.3597614 ↗
26. 2022
27. Bejan · 2013
28. A model parameter identification method for battery applications
29. Dielectric properties and fire safety of mineral oil and low-viscosity natural ester mixtures in various concentrations
30. Hart · 2010
31. Thermal analysis of high-power lithium-ion battery packs using flow network approach10.1002/er.3173 ↗