journal article·2024-12

Development of a 4-in-1 device for measuring properties of gas diffusion layers and porous transport layers in proton exchange membrane fuel cells and water electrolyzers

Xiao-Zi Yuan, Elton Gu, Elizabeth Fisher, Louis-Philippe Lefebvre, Marius Dinu, Nima Shaigan, Ali Malek, Khalid Fatih

Publisher page

Abstract

The carbon-based gas diffusion layer (GDL) and the Ti-based porous transport layer (PTL) are essential components in proton exchange membrane (PEM) fuel cells and water electrolyzers, respectively. The performance of these cells is significantly influenced by the properties of the GDL/PTL, especially under operational compression. This study utilizes a previously developed 4-in-1 device designed to simultaneously measure parameters under compression (UC), including thickness (TUC), resistivity (RUC, through-plane), and in-plane permeability (IPP-UC), and to separately measure through-plane permeability (TPP). The simultaneous measurement of TUC, RUC, and IPP-UC is achieved using an annular sample. Through the use of a two-piece adapter, TPP can also be measured using a disk sample. The device successfully measured TUC, RUC, IPP-UC, and TPP for diverse GDLs and PTLs, including commercially available and in-house prepared materials. The results were compared, showing variability in compressibility (by up to 45 % at 4 MPa), resistivity (with differences up to 25-fold at 1 MPa), and permeability (comparable at 1 MPa) among samples investigated. The 4-in-1 device has proven effective for GDL/PTL characterization, supporting component development and quality control in both the PEM fuel cell and water electrolyzer technologies.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Hybrid Renewable Energy Systems · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. The porous transport layer in proton exchange membrane water electrolysis: perspectives on a complex component10.1039/D2SE00260D ↗
2. Effects of various parameters of different porous transport layers in proton exchange membrane water electrolysis10.1016/j.electacta.2020.136641 ↗
3. Influence of cathode gas diffusion media on the performance of the PEMFCs10.1016/j.jpowsour.2004.01.030 ↗
4. Development of a 3-in-1 device to simultaneously measure properties of gas diffusion layer for the quality control of proton exchange membrane fuel cell components10.1016/j.jpowsour.2020.229009 ↗
5. Superhydrophilic porous transport layer enhances efficiency of polymer electrolyte membrane electrolyzers
6. Measurement of resistance, porosity, and water contact angle of porous transport layers for low-temperature electrolysis technologies10.3389/fenrg.2022.911077 ↗
7. Titanium porous-transport layers for PEM water electrolysis prepared by tape casting10.1016/j.jpowsour.2022.232606 ↗
8. Oxygen bubble transport in a porous transport layer of polymer electrolyte water electrolyzer10.1016/j.jpowsour.2022.232322 ↗
9. Kleemann · 2012
10. A review of functions, attributes, properties and measurements for the quality control of proton exchange membrane fuel cell components10.1016/j.jpowsour.2021.229540 ↗
11. Performance enhancement of PEM electrolyzers through iridium-coated titanium porous transport layers10.1016/j.elecom.2018.10.021 ↗
12. Porous transport layers for proton exchange membrane electrolysis under extreme conditions of current density, temperature, and pressure
13. A high-performance, durable and low-cost proton exchange membrane electrolyser with stainless steel components10.1039/D1EE02112E ↗
14. On the permeability of gas diffusion media used in PEM fuel cells10.1016/j.jpowsour.2004.11.069 ↗
15. In-plane gas permeability of proton exchange membrane fuel cell gas diffusion layers10.1016/j.jpowsour.2010.11.109 ↗
16. Interaction between the diffusion layer and the flow field of polymer electrolyte fuel cells—experiments and simulation studies10.1016/S0378-7753(03)00800-0 ↗
17. Experimental characterization of in-plane permeability of gas diffusion layers10.1016/j.jpowsour.2006.07.058 ↗
18. Chapter 46 diffusion media materials and characterization, handbook of fuel cells – fundamentals, technology, and applications
19. Ex-situ characterization of gas diffusion layers for proton exchange membrane fuel cells10.1016/j.jpowsour.2012.06.099 ↗
20. Effect of temperature on the in-plane permeability in the gas diffusion layer of a PEM fuel cell10.1149/1.3635583 ↗
21. Characterization of gas diffusion layers for PEMFC10.1149/1.1764779 ↗
22. In-plane and through-plane gas permeability of carbon fiber electrode backing layers10.1016/j.jpowsour.2006.06.096 ↗
23. Flooding of gas diffusion backing in PEFCs physical and electrochemical characterization10.1149/1.1763138 ↗