Modeling chemo-thermal mechanical stresses in all-solid-state lithium Batteries: Influence of grain morphology and alignment
Source abstract
Abstract
All-solid-state batteries (ASSBs) are gaining attraction as a safer and more efficient alternative to traditional liquid lithium-ion batteries due to their use of solid electrolytes. However, the advancement of ASSBs is hindered by challenges such as mechanical stress induced by volume changes in the cathode active material (CAM) during cycling. This study investigates the impact of composite cathode grain morphology on the induced mechanical stress within the composite cathode, specifically focusing on the configurations involving spherical and hexagonal LiCoO 2 (LCO) paired with spherical and fiber-shaped garnet-type Li 7 La 3 Zr 2 O 12 (LLZO) electrolytes. Four distinct systems are analyzed: spherical LCO-spherical LLZO, spherical LCO-fiber LLZO, hexagonal LCO-spherical LLZO, and hexagonal LCO-fiber LLZO. By generating modeled microstructures, we investigate the effects of the solid volume fraction of LCO and porosity on the induced chemo-thermal mechanical stress, reflecting real-life scenarios considering induced stresses after sintering. Our findings reveal that fiber LLZO in conjunction with textured hexagonal LCO reduces the induced mechanical stress in both components by 11.0 % for LCO and 9.0 % for LLZO. In contrast, the use of randomly oriented spherical LCO in the composite leads to higher induced mechanical stresses in both LCO and LLZO. The alignment of fiber LLZO critically influences the stress type within the system due to facet-specific contact interfaces, underscoring the importance of grain morphology in optimizing the mechanical performance of ASSBs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. High capacity garnet-based all-solid-state lithium batteries: fabrication and 3D-Microstructure resolved modeling10.1021/acsami.8b06705 ↗
2. Enhancement of the li+ conductivity of Li3AlF6 for stable all-solid-state lithium-ion batteries10.1021/acsaem.4c00115 ↗
3. Review—practical challenges hindering the development of solid state li ion batteries10.1149/2.1571707jes ↗
4. Interphase formation on lithium solid electrolytes—An in situ approach to study interfacial reactions by photoelectron spectroscopy10.1016/j.ssi.2015.06.001 ↗
5. Impedance characterization reveals mixed conducting interphases between sulfidic superionic conductors and lithium metal electrodes10.1016/j.jpowsour.2017.03.103 ↗
6. Direct observation of the interfacial instability of the fast ionic conductor Li10GeP2S12 at the lithium metal anode10.1021/acs.chemmater.6b00610 ↗
7. Composite polymer electrolytes with Li7La3Zr2O12 garnet-type nanowires as ceramic fillers: mechanism of conductivity enhancement and role of doping and morphology10.1021/acsami.7b03806 ↗
8. Investigating the dendritic growth during full cell cycling of garnet electrolyte in direct contact with Li metal10.1021/acsami.6b13925 ↗
9. Grain boundary modification to suppress lithium penetration through garnet-type solid electrolyte10.1016/j.jpowsour.2017.07.088 ↗
10. Characterizing the Li–Li7La3Zr2O12 interface stability and kinetics as a function of temperature and current density10.1016/j.jpowsour.2015.10.053 ↗
11. Modeling and simulation of 2D lithium-ion solid state battery10.1002/er.3344 ↗
12. The effect of stress on battery-electrode capacity10.1149/2.0371704jes ↗
13. Modeling of internal mechanical failure of all-solid-state batteries during electrochemical cycling, and implications for battery design10.1039/C7TA03199H ↗
14. Deformation and stress in electrode materials for Li-ion batteries10.1016/j.pmatsci.2014.02.001 ↗
15. Interfacial incompatibility and internal stresses in all-solid-state lithium ion batteries10.1002/aenm.201901810 ↗
16. Fracture behavior in battery materials
17. Zero-strain insertion materials for all-solid-state Li-Ion batteries
18. Rational design of quasi-zero-strain NCM cathode materials for minimizing volume change effects in all-solid-state batteries10.1021/acsmaterialslett.9b00441 ↗
19. Pseudo zero-strain insertion materials for Li-ion batteries: cross-sectional observations of LiNi1/2Co1/2O2, LiNi1/3Co1/3Mn1/3O2, and LiNi0. 8Co0. 15Al0. 05O210.1007/s11581-017-2385-2 ↗
20. Chemo-mechanical expansion of lithium electrode Materials–On the route to mechanically optimized all-solid-state batteries10.1039/C8EE00907D ↗
21. Effects of various conductive additive and polymeric binder contents on the performance of a lithium-ion composite cathode10.1149/1.2976031 ↗
22. Solvent-free manufacturing of electrodes for lithium-ion batteries10.1038/srep23150 ↗
23. Quantifying the solid electrolyte interphase stress induced capacity fading of lithium-ion batteries via a multiscale mechanical-electrochemical coupling model10.1007/s11431-024-2711-7 ↗
24. Lithium intercalation cells without metallic lithium: MoO2 and WO2/LiCoO210.1149/1.2100521 ↗
25. Nagaura · 1990 · vol. 9 · 209
26. Characterization of thin‐film rechargeable lithium batteries with lithium cobalt oxide cathodes10.1149/1.1837188 ↗
27. High capacity surface-modified LiCoO2 cathodes for lithium-ion batteries10.1149/1.1526782 ↗
28. Electrochemical stability of thin-film LiCoO2 cathodes by aluminum-oxide coating10.1021/cm0201403 ↗
29. Cathode materials review10.1063/1.4878478 ↗
30. Favorable electrochemical performance of LiMn2O4/LiFePO4 composite electrodes attributed to composite solid electrolytes for all-solid-state lithium batteries10.1021/acs.langmuir.0c03274 ↗
31. Fast lithium ion conduction in garnet-type Li7La3Zr2O1210.1002/anie.200701144 ↗
32. High conductivity of mixed phase Al-substituted Li7La3Zr2O1210.1007/s10832-015-9988-7 ↗
33. Structure and dynamics of the fast lithium ion conductor “Li7La3Zr2O12”10.1039/c1cp22108f ↗
34. Li7La3Zr2O12 interface modification for Li dendrite prevention10.1021/acsami.6b00831 ↗
35. Temperature effects on cycling stability of Li plating/stripping on Ta-doped Li7La3Zr2O1210.1016/j.jpowsour.2017.01.009 ↗
36. About the compatibility between high voltage spinel cathode materials and solid oxide electrolytes as a function of temperature10.1021/acsami.6b09059 ↗
37. Characterization of the interface between LiCoO2 and Li7La3Zr2O12 in an all-solid-state rechargeable lithium battery10.1016/j.jpowsour.2010.07.073 ↗
38. Interface stability in solid-state batteries10.1021/acs.chemmater.5b04082 ↗
39. Tailoring shape and exposed crystal facet of single-crystal layered-oxide cathode particles for all-solid-state batteries10.1016/j.cej.2022.136828 ↗
40. Flakelike LiCoO2 with Exposed {010} Facets As a Stable Cathode Material for Highly Reversible Lithium Storage10.1021/acsami.5b10977 ↗
41. Understanding the influence of Li7La3Zr2O12 nanofibers on critical current density and coulombic efficiency in composite polymer electrolytes10.1021/acsami.3c04262 ↗
42. Low resistance–integrated all-solid-state battery achieved by Li7La3Zr2O12 nanowire upgrading polyethylene oxide (PEO) composite electrolyte and PEO cathode binder
43. Synergistic multi-doping effects on the Li7La3Zr2O12 solid electrolyte for fast lithium ion conduction
44. A LLZO Fibers/PPO polymeric matrix solid electrolyte for high voltage solid-state lithium batteries10.1007/s00339-024-07815-x ↗
45. Three-dimensional LLZO/PVDF-HFP fiber network-enhanced ultrathin composite solid electrolyte membrane for dendrite-free solid-state lithium metal batteries10.1016/j.memsci.2022.121095 ↗
46. Microstructural parameters governing the mechanical stress and conductivity of all-solid-state lithium-ion-battery cathodes10.1016/j.est.2023.107784 ↗
47. The influence of hafnium impurities on the electrochemical performance of tantalum substituted Li7La3Zr2O12 solid electrolytes10.1007/s11581-021-04300-w ↗
48. Evaluation of scalable synthesis methods for aluminum-substituted Li7La3Zr2O12 solid electrolytes10.3390/ma14226809 ↗
49. Modelling electro-chemical induced stresses in all-solid-state batteries: anisotropy effects in cathodes and cell design optimisation10.1016/j.jpowsour.2020.229430 ↗
50. A new algorithm for three-dimensional voronoi tessellation10.1016/0021-9991(83)90087-6 ↗
51. Elastic properties of lithium cobalt oxide (LiCoO2)10.1016/j.jascer.2017.03.001 ↗
52. Phase-field modeling of stress generation in polycrystalline LiCoO210.1016/j.ssi.2018.02.013 ↗
53. Mechanical properties of the solid electrolyte Al-substituted Li7La3Zr2O12 (LLZO) by utilizing micro-pillar indentation splitting test10.1016/j.jeurceramsoc.2018.02.032 ↗
54. Room temperature elastic moduli and vickers hardness of hot-pressed LLZO cubic garnet10.1007/s10853-012-6687-5 ↗
55. Elastic properties of the solid electrolyte Li7La3Zr2O12 (LLZO)10.1021/acs.chemmater.5b03854 ↗
56. A numerical method for computing the overall response of nonlinear composites with complex microstructure10.1016/S0045-7825(97)00218-1 ↗
57. Computational homogenization of elasticity on a staggered grid10.1002/nme.5008 ↗