An extensive scaling-up oriented investigation on carbon felt flow-through and interdigitated Vanadium Flow Batteries cells
Source abstract
Abstract
A 3D multiphysics full-cell model for Vanadium Flow Batteries (VFBs) was developed and validated, enabling precise computational predictions of battery performance. Several innovations are proposed, such as a novel numerical formulation for membrane modeling, based on an internal boundary condition to ensure numerical robustness and mesh efficiency, improving solver stability. Parameters such as electrode permeability, conductivity, and contact resistance were determined experimentally, while electrolyte density and viscosity were calculated using novel empirical formulations. The accuracy of the model was within 2 %. A total of 90 3D simulation cases were evaluated with interdigitated flow-by (IDFF) configurations in a 50 cm 2 cell, by varying the number and width of the channels and compared to a flow-through (FTFF) benchmark. The FTFF setup demonstrated superior performance in a wider operating conditions range, achieving peak power up to 6 % higher than IDFF at 50 mL min -1 . Conversely, IDFF cells exhibited potential for higher peak power, up to 10 %, when operated at limiting pressure conditions as those of industrial-scale VFB stacks. This model, validated against both electrochemical and hydraulic experiments, elucidate the fluid dynamics and electrochemical interplay in FTFF and IDFF configurations enables the exploration of flow field effects under industrially relevant constraints.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Challenges of grid integration of wind power on power system grid integrity: a review
2. The balance of renewable sources and user demands in grids: power electronics for modular battery energy storage systems10.1109/TPEL.2010.2085455 ↗
3. Storage requirements and costs of shaping renewable energy toward grid decarbonization10.1016/j.joule.2019.06.012 ↗
4. Engineering aspects of the design, construction and performance of modular redox flow batteries for energy storage10.1016/j.est.2017.02.007 ↗
5. Prospects for industrial Vanadium flow batteries10.1016/j.ceramint.2023.01.165 ↗
6. Redox flow batteries: a review10.1007/s10800-011-0348-2 ↗
7. Progress in flow battery research and development10.1149/1.3599565 ↗
8. Redox flow batteries: Status and perspective towards sustainable stationary energy storage10.1016/j.jpowsour.2020.228804 ↗
9. A high power density and long cycle life Vanadium redox flow battery10.1016/j.ensm.2019.07.005 ↗
10. Redox flow batteries: Fundamentals and applications
11. Modulating single-atom sulfur-vacancy defect in MoS2-x catalysts to boost cathode redox kinetics for Vanadium Flow Batteries
12. Membranes with well-defined selective layer regulated by controlled solvent diffusion for high power density flow battery10.1002/aenm.202001382 ↗
13. Redox flow batteries for the storage of renewable energy: A review10.1016/j.rser.2013.08.001 ↗
14. Redox flow batteries for energy storage: their promise, achievements and challenges10.1016/j.coelec.2019.05.007 ↗
15. Design and development of large-scale Vanadium redox flow batteries for engineering applications10.1016/j.jpowsour.2023.233855 ↗
16. Engineering aspects of the design, construction and performance of modular redox flow batteries for energy storage10.1016/j.est.2017.02.007 ↗
17. Effect of flow field on the performance of an all-Vanadium redox flow battery10.1016/j.jpowsour.2016.01.048 ↗
18. Redox flow batteries and their stack-scale flow fields10.1007/s43979-023-00072-6 ↗
19. Flow field design pathways from lab-scale toward large-scale flow batteries10.1016/j.energy.2019.02.107 ↗
20. Characterization and scale-up of serpentine and interdigitated flow fields for application in commercial Vanadium redox flow batteries10.1016/j.jpowsour.2022.231812 ↗
21. Serpentine flow field with changing rib width for enhancing electrolyte penetration uniformity in redox flow batteries10.1016/j.est.2022.104135 ↗
22. An analytical model for parametric study on serpentine and interdigitated flow fields in redox flow batteries10.1016/j.est.2023.108188 ↗
23. Machine learning-assisted design of flow fields for redox flow batteries10.1039/D1EE03224K ↗
24. Enhancing the efficiency of kW-class Vanadium redox flow batteries by flow factor modulation: An experimental method10.1016/j.apenergy.2020.114532 ↗
25. Prospect of modeling industrial scale flow batteries – From experimental data to accurate overpotential identification10.1016/j.rser.2022.112559 ↗
26. Data-driven electrode parameter identification for Vanadium redox flow batteries through experimental and numerical methods10.1016/j.apenergy.2020.115530 ↗
27. Numerical study on serpentine design flow channel configurations for vanadium redox flow batteries10.1016/j.est.2020.101802 ↗
28. The effect of interdigitated channel and land dimensions on flow cell performance10.1149/2.0471811jes ↗
29. Three dimensional multi-physical modeling study of interdigitated flow field in porous electrode for Vanadium redox flow battery10.1016/j.jpowsour.2019.227023 ↗
30. Analysis of flow field design on Vanadium redox flow battery performance: Development of 3D computational fluid dynamic model and experimental validation10.1016/j.apenergy.2018.06.148 ↗
31. A two-dimensional model for the design of flow fields in Vanadium redox flow batteries10.1016/j.ijheatmasstransfer.2019.02.008 ↗
32. Modeling of Vanadium ion diffusion across the ion exchange membrane in the vanadium redox battery10.1016/j.memsci.2012.01.024 ↗
33. A simple model for the Vanadium redox battery10.1016/j.electacta.2009.06.086 ↗
34. Newman · 2004
35. Das · 2018
36. Numerical simulation for Brinkman system with varied permeability tensor10.3390/math10183242 ↗
37. CFD simulation of three-dimensional multiphase flow in a rotating packed bed
38. Viscous permeability of random fiber structures: Comparison of electrical and diffusional estimates with experimental and analytical results10.1177/0021998305046438 ↗
39. Enhancing Vanadium redox flow batteries performance through local compression ratio adjustment using stiffness gradient carbon felt electrodes
40. Carbon felt electrodes for redox flow battery: Impact of compression on transport properties10.1016/j.est.2019.100997 ↗
41. Electric and hydraulic properties of carbon felt immersed in different dielectric liquids10.3390/ma11040650 ↗
42. The Nernst–Einstein equation for an anomalous diffusion at short spatial scales10.1016/j.physd.2021.132851 ↗
43. O’Hayre · 2016
44. On the origin and application of the Bruggeman correlation for analysing transport phenomena in electrochemical systems10.1016/j.coche.2016.02.006 ↗
45. Thermodynamic dissociation constant of the bisulfate ion from Raman and ion interaction modeling studies of aqueous sulfuric acid at low temperatures10.1021/jp027775+ ↗
46. A Transient Vanadium Flow battery model incorporating Vanadium crossover and water transport through the membrane10.1149/2.017209jes ↗
47. Open circuit voltage of Vanadium redox flow batteries: Discrepancy between models and experiments10.1016/j.elecom.2011.01.020 ↗
48. Nernst equations and concentration chemical reaction overpotentials for VRFB operation10.1149/1945-7111/ad0073 ↗
49. Modelling and estimation of Vanadium redox flow batteries: A review10.3390/batteries8090121 ↗
50. The kinetics of electrode reactions: Part I—General considerations and electron transfer control10.1080/00202967.1992.11870941 ↗
51. Mass transfer at carbon fibre electrodes10.1007/BF01008853 ↗
52. Nernst–Planck modeling of multicomponent ion transport in a Nafion membrane at high current density
53. Trovò · 2019
54. Experiment-supported survey of inefficient electrolyte mixing and capacity loss in Vanadium flow battery tanks10.1016/j.cej.2024.152137 ↗
55. Battery management system with testing protocols for kW-class Vanadium redox flow batteries
56. A flow battery cell testing facility for versatile active material characterization: Features and operations10.1016/j.jpowsour.2024.235679 ↗
57. Design and experimental validation of an optimal remixing procedure for Vanadium flow batteries affected by faradaic imbalance10.1016/j.jpowsour.2024.235487 ↗
58. Prieto-Díaz · 2024
59. A model for all-Vanadium redox flow batteries: Introducing electrode-compression effects on voltage losses and hydraulics10.1002/ente.201300114 ↗
60. 2D-dynamic phenomenological modelling of Vanadium redox flow batteries – Analysis of the mass transport related overpotentials10.1016/j.jpowsour.2020.229142 ↗
61. A dynamic performance model for redox-flow batteries involving soluble species10.1016/j.electacta.2008.05.067 ↗
62. Validity of the Bruggeman relation for porous electrodes10.1088/0965-0393/21/7/074009 ↗
63. Influence of temperature on performance of all Vanadium redox flow battery: analysis of ionic mass transfer
64. Electron-transfer kinetics of Np3+/Np4+, NpO2+/NpO2 2+, V2+/V3+, and VO2+/VO2+ at carbon electrodes10.1149/1.1870794 ↗
65. 2023
66. Briggs · 2000
67. A numerical study of electrode thickness and porosity effects in all Vanadium redox flow batteries10.1016/j.est.2020.101208 ↗
68. Vanadium redox flow batteries: A review oriented to fluid-dynamic optimization10.3390/en14010176 ↗
69. Numerical investigations of flow field designs for Vanadium redox flow batteries10.1016/j.apenergy.2012.12.041 ↗
70. Effect of compression ratio of graphite felts on the performance of an all-Vanadium redox flow battery10.3390/en12020313 ↗
71. Computational study of effects of contact resistance on a large-scale Vanadium redox flow battery stack10.1002/er.4453 ↗
72. Numerical investigations of effects of the interdigitated channel spacing on overall performance of Vanadium redox flow batteries10.1016/j.est.2020.101781 ↗
73. A three-dimensional hydraulic stack model for redox flow batteries considering porosity variations in porous felt electrodes and bypass flow in side gaps10.3390/batteries9070359 ↗
74. A numerical study on the flow characteristics and flow uniformity of Vanadium redox flow battery flow frame10.3390/app10238427 ↗
75. An alternative low-loss stack topology for Vanadium redox flow battery: Comparative assessment10.1016/j.jpowsour.2016.11.042 ↗
76. Analysis of the polarization in a Li-Ion battery cell by numerical simulations10.1149/1.3486161 ↗
77. The influence of electrode and channel configurations on flow battery performance10.1149/2.0941409jes ↗
78. Stack design considerations for Vanadium redox flow battery10.1007/s41403-018-0044-1 ↗
79. New strategies for the evaluation of Vanadium Flow Batteries: testing prototypes10.1016/j.coche.2022.100853 ↗
80. Oxygen transport in polymer-electrolyte fuel cells with interdigitated air channels in porous bipolar plates10.1149/1.3509159 ↗