Amide-based Al electrolytes and their application in Al metal anode-organic batteries
Source abstract
Abstract
Aluminum rechargeable batteries are seen as a next-generation battery technology based on abundant materials. However, the current standard Al electrolytes are based on expensive ionic liquids . In this paper, the potential use of three AlCl 3 /amide-based electrolytes is investigated as a low-cost alternative from the perspective of Al metal anode and organic cathode compatibility. Our investigation shows the promising electrochemical performance of amide electrolytes and specific differences between the electrolytes depending on amide alkyl chain length. In particular, amides with longer alkyl chains show better plating/stripping efficiency and lower overpotential compared to the shorter acetamide one. Similarly, organic cathode capacity retention is the best for the electrolyte with the longest alkyl chain. However, the cathode capacity retention is subpar to the standard ionic liquid-based Al electrolyte although it undergoes the same electrochemical mechanism of carbonyl bond reduction. Interestingly, there is no deterioration of the anthraquinone redox peak through the appearance of a side peak at a lower potential in amide-based electrolytes, which is observed in standard electrolyte based on ionic liquid. Amide-based electrolyte display promise for practical applicability, however, the low oxidation stability of amide-based electrolytes is identified as one of their key limitation and should be addressed in future work.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Ionic liquids properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Promises and challenges of next-generation “beyond Li-ion” batteries for electric vehicles and grid decarbonization10.1021/acs.chemrev.0c00767 ↗
2. Pursuing high voltage and long lifespan for low-cost Al-based rechargeable batteries: dual-ion design and prospects
3. An overview and prospective on Al and Al-ion battery technologies10.1016/j.jpowsour.2020.228870 ↗
4. Nonaqueous rechargeable aluminum batteries: progresses, challenges, and perspectives10.1021/acs.chemrev.0c01257 ↗
5. Emerging nonaqueous aluminum‐ion batteries: challenges, status, and perspectives
6. Nonaqueous rechargeable aluminum batteries10.1016/j.joule.2021.12.003 ↗
7. An ultrafast rechargeable aluminium-ion battery10.1038/nature14340 ↗
8. Electrolyte design for rechargeable aluminum-ion batteries: recent advances and challenges
9. Recent advances in developing organic positive electrode materials for rechargeable aluminum-ion batteries10.1016/j.ensm.2022.06.018 ↗
10. Concept and electrochemical mechanism of an Al metal anode ‒ organic cathode battery10.1016/j.ensm.2019.07.033 ↗
11. Electrochemical mechanism of Al metal–organic battery based on phenanthrenequinone10.34133/2021/9793209 ↗
12. The electrodeposition of aluminum from nonaqueous solutions at room temperature10.1149/1.2778133 ↗
13. Electrochemical behavior of the aluminum electrode in molten salt electrolytes10.1149/1.2408069 ↗
14. An electrochemical and spectroscopic study of some aromatic hydrocarbons in the room temperature molten salt system aluminum chloride-n-butylpyridinium chloride10.1021/ja00496a008 ↗
15. Do all ionic liquids need organic cations? Characterisation of [AlCl2·nAmide]+ AlCl4- and comparison with imidazolium based systems10.1039/c0cc04989a ↗
16. Aluminium electrodeposition under ambient conditions10.1039/C4CP01508H ↗
17. Deep eutectic solvents (DESs) and their applications10.1021/cr300162p ↗
18. Aluminum ions speciation and transport in acidic deep eutectic AlCl 3 amide electrolytes10.1016/j.molliq.2020.114118 ↗
19. AlCl3/amide ionic liquids for electrodeposition of aluminum10.1007/s10008-016-3384-3 ↗
20. Acetamide: a low-cost alternative to alkyl imidazolium chlorides for aluminium-ion batteries10.1039/C8CC04468F ↗
21. Comparison of chloroaluminate melts for aluminum graphite dual-ion battery application10.1002/batt.202000244 ↗
22. A low-cost Al-graphite battery with urea and acetamide-based electrolytes10.1002/celc.202100183 ↗
23. Density, viscosity and electrical conductivity of AlCl3-amide ionic liquid analogues10.1016/j.molliq.2017.09.091 ↗
24. Early stage techno-economic and environmental analysis of aluminium batteries10.1039/D2YA00253A ↗
25. On the practical applications of the magnesium fluorinated alkoxyaluminate electrolyte in Mg battery cells10.1021/acsami.2c05141 ↗
26. Evaluation of (CF 3 SO 2) 2 N − (TFSI) based electrolyte solutions for Mg batteries10.1149/2.0161513jes ↗
27. Anthraquinone based polymer as high performance cathode material for rechargeable lithium batteries10.1039/B814515F ↗
28. Amidine-based ionic liquid analogues with AlCl3: a credible new electrolyte for rechargeable Al batteries10.1039/D1CC02680A ↗
29. Organic cathodes, a path toward future sustainable batteries: mirage or realistic future?10.1021/acs.chemmater.3c02408 ↗
30. Probing electrochemical reactions in organic cathode materials via in operando infrared spectroscopy10.1038/s41467-018-03114-1 ↗