journal article·2025-10Open access

Advanced manufacturing for efficient GDC diffusion barrier layer by rapid thermal processing for large-area solid oxide cells

Fjorelo Buzi, Lucile Bernadet, Jordi Orrit-Prat, Raül Bonet, Jaume Caro, Dario Montinaro, Jan Pieter Ouweltjes, Federico Baiutti, Marc Torrell, Alex Morata, Albert Tarancón

Abstract

Solid oxide cells (SOCs) utilizing mixed ionic-electronic conductors often face performance limitations due to undesired reactions with conventional stabilized-zirconia electrolytes. Ceria-based diffusion barrier layers mitigate these reactions, enhancing electrode activity and durability. Recently, physical thin-film methods have enabled sub-micrometer barrier layers with significantly improved performance compared to traditional methods. However, scalability and cost-effectiveness remain key constraints for commercial SOCs. In this work, we developed a gadolinium-doped ceria (GDC) diffusion barrier layer by magnetron sputtering at room temperature, followed by a novel rapid thermal processing (RTP) sintering approach. This method produced a dense submicrometer GDC layer on anode-supported half-cells. Time and energy consumption were significantly reduced compared to conventional processes. Structural, morphological, compositional, and electrochemical characterizations were performed to evaluate quality and performance. Tests on button cells showed >30 % performance improvement over reference cells with state-of-the-art porous barrier layers, with power outputs of 1.26 W cm −2 at 0.7 V in fuel cell mode and 1.54 A cm −2 at 1.3 V in electrolysis mode at 750 °C. When scaled to large-area cells (12 × 8 cm 2 ) in short stacks, RTP-treated cells achieved up to 60 % improvement in fuel cell and 30 % in electrolysis at 650 °C. This approach provides a viable route for large-scale production of high-performance SOCs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Reversible solid-oxide cells for clean and sustainable energy10.1093/ce/zkz023 ↗
2. A critical review of key materials and issues in solid oxide cells
3. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
4. Air electrodes and related degradation mechanisms in solid oxide electrolysis and reversible solid oxide cells10.1016/j.rser.2021.110918 ↗
5. Kinetics of oxygen reaction in porous La0.6Sr0.4Co0.2Fe0.8O3–δ-Ce0.8Gd0.2O1.9 composite electrodes for solid oxide cells10.1016/j.ijhydene.2021.05.071 ↗
6. Characterization of lanthanum zirconate formation at the A‐site‐deficient strontium‐doped lanthanum manganite Cathode/Yttrium‐Stabilized zirconia electrolyte interface of solid oxide fuel cells10.1111/j.1551-2916.2008.02524.x ↗
7. Degradation Mechanism of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ/Gd 0.1 Ce 0.9 O 2-δ Composite Electrode Operated under Solid Oxide Electrolysis and Fuel Cell Conditions10.1016/j.electacta.2017.05.011 ↗
8. Sr and Zr transport in PLD-grown Gd-Doped ceria interlayers10.1016/j.ssi.2017.10.023 ↗
9. Insights into strontium zirconate-induced interface pressures in solid oxide electrolysis cells10.1016/j.jpowsour.2023.233747 ↗
10. Gadolinia-doped ceria and yttria stabilized zirconia interfaces: regarding their application for SOFC technology10.1016/S1359-6454(00)00261-5 ↗
11. High performance metal-supported solid oxide fuel cells with Gd-Doped ceria barrier layers10.1016/j.jpowsour.2011.07.014 ↗
12. Interface engineering of yttrium stabilized zirconia/gadolinium doped ceria Bi-Layer electrolyte solid oxide fuel cell for boosting electrochemical performance10.1016/j.jpowsour.2019.226776 ↗
13. Electrochemical property of solid solutions formed in (La,Sr)(Co,Fe)O3− Cathode/Doped-CeO2 Interlayer/Y2O3–ZrO2 electrolyte system during operation of solid oxide fuel cells10.1016/j.ssi.2016.12.014 ↗
14. Nature and functionality of La0.58 Sr0.4 Co0.2 Fe0.8 O3-δ/Gd0.2 Ce0.8 O2-δ/Y0.16 Zr0.84 O2-δ interfaces in SOFCs10.1149/2.0031811jes ↗
15. Enhanced performance of gadolinia-doped ceria diffusion barrier layers fabricated by pulsed laser deposition for large-area solid oxide fuel cells10.1021/acsaem.8b00039 ↗
16. Multi-scale analysis of the diffusion barrier layer of gadolinia-doped ceria in a solid oxide fuel cell operated in a stack for 3000 h10.1016/j.jpowsour.2017.01.109 ↗
17. Enhanced diffusion barrier layers for avoiding degradation in SOFCs aged for 14000 h during 2 years10.1016/j.jpowsour.2022.232400 ↗
18. Unraveling the pivotal role of heterointerfaces on oxide ion transport in solid oxide fuel cells10.1016/j.jpowsour.2023.233952 ↗
19. Functional thin films as cathode/electrolyte interlayers: a strategy to enhance the performance and durability of solid oxide fuel cells10.1039/D2TA03641J ↗
20. Thickness effect of thin-film barrier layers for enhanced long-term operation of solid oxide fuel cells10.1063/5.0159765 ↗
21. Intercalation of thin-film Gd-Doped ceria barrier layers in electrolyte-supported solid oxide cells: physicochemical aspects10.1021/acsami.1c11175 ↗
22. Performance and degradation of electrolyte supported SOECs with advanced thin-film gadolinium doped ceria barrier layers in long-term stack test10.1149/1945-7111/ad4781 ↗
23. Strontium diffusion in magnetron sputtered gadolinia‐doped ceria thin film barrier coatings for solid oxide fuel cells10.1002/aenm.201300003 ↗
24. Optimization of the electrical performances in solid oxide fuel cells with room temperature sputter deposited Gd0.1ce0.9o1.95 buffer layers by controlling their granularity via the in-Air annealing step10.1016/j.ijhydene.2020.02.187 ↗
25. Optimized magnetron sputtering process for the deposition of gadolinia doped ceria layers with controlled structural properties10.1016/j.surfcoat.2020.126095 ↗
26. A review on the preparation of thin-film YSZ electrolyte of SOFCs by magnetron sputtering technology10.1016/j.seppur.2022.121627 ↗
27. Magnetron sputtering enabled sustainable synthesis of nanomaterials for energy electrocatalysis10.1039/D0GC03994B ↗
28. Physics and technology of magnetron sputtering discharges10.1088/1361-6595/abb7bd ↗
29. The effects of thermal annealing on the structure and the electrical transport properties of ultrathin gadolinia-doped ceria films grown by pulsed laser deposition10.1007/s00339-011-6424-y ↗
30. Rapid thermal processing systems: a review with emphasis on temperature control10.1116/1.584902 ↗
31. Rapid thermal processing: a new step forward in microelectronics technologies
32. Rapid thermal processing of garnet-based composite cathodes10.1016/j.jpowsour.2022.231872 ↗
33. A perspective on emerging and future sintering technologies of ceramic materials10.1002/adem.202201870 ↗
34. Rapid isothermal processing10.1063/1.340176 ↗
35. Degradation of Ni-YSZ electrodes in solid oxide cells: impact of polarization and initial microstructure on the Ni evolution10.1149/2.1261915jes ↗
36. Degradation mechanisms of solid oxide fuel cells under various thermal cycling conditions10.1021/acsami.1c13779 ↗
37. Long-term degradation of La0.6Sr0.4Co0.2Fe0.8O3-δ IT-SOFC cathodes due to silicon poisoning10.1016/j.ssi.2016.01.005 ↗
38. Synergistic Effects of Temperature and Polarization on Cr Poisoning of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3−δ Solid Oxide Fuel Cell Cathodes10.1039/C9TA01275C ↗
39. X-Ray fluorescence nano-imaging of long-term operated solid oxide electrolysis cells10.1016/j.jpowsour.2019.02.084 ↗
40. ID16B: a hard X-Ray nanoprobe beamline at the ESRF for nano-analysis10.1107/S1600577515019839 ↗
41. Size-related lattice parameter changes and surface defects in ceria nanocrystals10.1021/jp1031465 ↗
42. Preparation and characterization of 10mol% Gd doped CeO2 (GDC) electrolyte for SOFC applications10.1016/j.ceramint.2012.05.030 ↗
43. Structural features of Sm- and Gd-Doped ceria studied by synchrotron X-Ray diffraction and μ-Raman spectroscopy10.1021/acs.inorgchem.5b00395 ↗
44. Lattice parameters, ionic conductivities, and solubility limits in fluorite-structure MO2 oxide [M = Hf4+, Zr4+, Ce4+, Th4+, U4+] solid solutions10.1111/j.1151-2916.1989.tb07663.x ↗
45. X-Ray studies of the system nickel—oxygen—water. I. Nickelous oxide and Hydroxide110.1021/ja01329a013 ↗
46. Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells10.1016/j.ssi.2005.03.009 ↗
47. Performance and stability analysis of SOFC containing thin and dense gadolinium-doped ceria interlayer sintered at low temperature10.1016/j.jmat.2021.09.001 ↗
48. Effect of Gd-Doped ceria interlayer on the stability of solid oxide electrolysis cell10.1016/j.ssi.2016.07.007 ↗
49. YSZ/GDC bilayer and gradient barrier layers deposited by reactive magnetron sputtering for solid oxide cells10.1016/j.surfcoat.2018.09.085 ↗
50. Processing of Ce0.8Gd0.2O2-δ barrier layers for solid oxide cells: the effect of preparation method and thickness on the interdiffusion and electrochemical performance10.1016/j.jeurceramsoc.2020.06.006 ↗
51. Mobility of Sr in gadolinia doped ceria barrier layers prepared using spray pyrolysis, pulsed laser deposition and magnetron sputtering methods10.1149/2.0531602jes ↗
52. Large area solid oxide fuel cells with room temperature sputtered barrier layers: role of the layer thickness and uniformity in the enhancement of the electrochemical performances and durability10.1016/j.ijhydene.2023.04.170 ↗
53. Degradation analysis of solid oxide fuel cells with (La,Sr)(Co,Fe)O3- δ Cathode/Gd2 O3 –CeO2 Interlayer/Y2 O3 –ZrO2 electrolyte system: the influences of microstructural change and solid solution formation10.1149/2.0841904jes ↗
54. Development of lanthanum strontium cobalt ferrite perovskite electrodes of solid oxide fuel cells – a review10.1016/j.ijhydene.2019.01.212 ↗
55. Why is the performance different between Small- and large-scale SOFCs?10.1016/j.electacta.2023.141965 ↗
56. Electrochemical quality assurance of solid oxide electrolyser (SOEC) stacks10.1149/2.0041915jes ↗
57. Post‐test analysis on a solid oxide cell stack operated for 10,700 hours in steam electrolysis mode10.1002/fuce.201600194 ↗
58. A self-assembled multiphasic thin film as an oxygen electrode for enhanced durability in reversible solid oxide cells10.1021/acsami.4c06290 ↗