journal article·2025-03

Amphiphilic surfactant-assisted cathode-electrolyte interphases for prolonged cycling performance in Ni-rich NCMA cathode materials of lithium-ion batteries

Soon Young Kim, Subin Lee, Sae Chan Yoon, Taeeun Yim

Publisher page

Abstract

The nickel-rich LiNi xCo yMn zAl 1-x-y-zO 2 ( x + y + z = 1, NCMA) layered cathode has recently attracted attention as a promising cathode material; however, its lifespan is shortened upon cycling due to its poor interfacial stability. Our attempts to prolong its lifespan included modifying the surface of the NCMA cathode using an amphipathic coating precursor, 3-( N, N-dimethylpalmitylammonio) propanesulfonate (PAPS). Favorable chemical interactions between the hydrophilic PAPS precursor and hydrophilic surface of the NCMA cathode allow the sulfonate functional groups of the precursor to attach to the NCMA cathode surface. The subsequent heating process results in the formation of uniformly distributed cathode–electrolyte interphase (CEI) layers, which effectively suppress electrolyte decomposition. Consequently, the capacity retention of the PAPS-modified NCMA cathode improves at both room temperature (92.7%) and elevated temperatures (86.4%) compared with that of the pristine NCMA cathode (58.5% and 28.8%, respectively). Additional systematic analyses indicate that the PAPS-derived CEI layers improve the interfacial stability of the NCMA cathodes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Energy consumption of current and future production of lithium-ion and post lithium-ion battery cells10.1038/s41560-023-01355-z ↗
2. On the sustainability of lithium ion battery industry – a review and perspective10.1016/j.ensm.2020.12.019 ↗
3. The significance of Li-ion batteries in electric vehicle life-cycle energy and emissions and recycling's role in its reduction10.1039/C4EE03029J ↗
4. Fast charging of energy-dense lithium-ion batteries10.1038/s41586-022-05281-0 ↗
5. Building safe lithium-ion batteries for electric vehicles: a review10.1007/s41918-019-00060-4 ↗
6. Beyond doping and coating: prospective strategies for stable high-capacity layered Ni-rich cathodes10.1021/acsenergylett.0c00191 ↗
7. Problems and their origins of Ni-rich layered oxide cathode materials10.1016/j.ensm.2019.08.013 ↗
8. Highly elastic binder for improved cyclability of nickel-rich layered cathode materials in lithium-ion batteries10.1002/aenm.202001069 ↗
9. A review of degradation mechanisms and recent achievements for Ni-rich cathode-based Li-ion batteries10.1002/aenm.202103005 ↗
10. High-voltage-driven surface structuring and electrochemical stabilization of Ni-rich layered cathode materials for Li rechargeable batteries10.1002/aenm.202000521 ↗
11. Chemically-induced cathode–electrolyte interphase created by lithium salt coating on Nickel-rich layered oxides cathode10.1016/j.jpowsour.2018.11.008 ↗
12. The effect of cation mixing controlled by thermal treatment duration on the electrochemical stability of lithium transition-metal oxides10.1039/C7CP05530G ↗
13. Effect of cationic uniformity in precursors on Li/Ni mixing of Ni-rich layered cathodes10.1021/acs.energyfuels.0c03967 ↗
14. Controlling residual lithium in high-nickel (>90%) lithium layered oxides for cathodes in lithium-ion batteries10.1002/anie.202007436 ↗
15. Effect of residual lithium rearrangement on Ni-rich layered oxide cathodes for lithium-ion batteries10.1002/ente.201700950 ↗
16. Capacity fading of Ni-rich Li[NixCoyMn1−x−y]O2 (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation?10.1021/acs.chemmater.7b05269 ↗
17. The promotion of phase transitions for Ni-based layered cathode towards enhanced high-voltage cycle stability10.1016/j.jpowsour.2020.228699 ↗
18. Microcrack generation and modification of Ni-rich cathodes for Li-ion batteries: a review
19. Mechanistic insights into suppressing microcracks by regulating grain size of precursor for high-performance Ni-rich cathodes10.1016/j.cej.2023.146793 ↗
20. Impact of microcrack generation and surface degradation on a nickel-rich layered Li[Ni0.9Co0.05Mn0.05]O2 cathode for lithium-ion batteries10.1021/acs.chemmater.7b03268 ↗
21. Cathode electrolyte interphase-forming additive for improving cycling performance and thermal stability of Ni-rich LiNixCoyMn1−x−yO2 cathode materials10.1021/acsami.2c15685 ↗
22. Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries10.1016/j.nanoen.2021.106301 ↗
23. Surface modification of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material by tungsten oxide coating for improved electrochemical performance in lithium-ion batteries10.1021/acsami.9b02889 ↗
24. An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes10.1016/j.nanoen.2021.106665 ↗
25. Understanding the effects of surface modification on improving the high-voltage performance of Ni-rich cathode materials10.1016/j.mtener.2018.08.013 ↗
26. Highly improved structural stability and electrochemical properties of Ni-rich NCM cathode materials10.1016/j.ceramint.2022.12.065 ↗
27. Building a stabilized structure from surface to bulk of Ni-rich cathode for enhanced electrochemical performance10.1016/j.ensm.2022.01.056 ↗
28. Suppressed microcracking and F penetration of Ni-rich layered cathode via the combined effects of titanium dioxide doping and coating10.1021/acsaem.0c02897 ↗
29. Enhanced cyclic stability of NCM-622 cathode by Ti3+ doped TiO2 coating10.1016/j.jallcom.2021.159664 ↗
30. The surface Al2O3 coating and bulk Zr doping drastically improve the voltage fade and cycling stability of Li(Ni0.8Mn0.1Co0.1)O2 cathode materials10.1016/j.jallcom.2023.168778 ↗
31. Enhancing the stabilities and electrochemical performances of LiNi0.5Co0.2Mn0.3O2 cathode material by simultaneous LiAlO2 coating and Al doping10.1016/j.electacta.2021.138038 ↗
32. Effect of sulfate-based cathode-electrolyte interphases on electrochemical performance of Ni-rich cathode material
33. Sulfonate-based artificial cathode−electrolyte interface to enhance electrochemical performance of Ni-rich layered oxide cathode materials10.1021/acssuschemeng.0c00404 ↗
34. Structural effects of solvents on Li-ion-hopping conduction in highly concentrated LiBF4/sulfone solutions10.1021/acs.jpcb.1c01361 ↗
35. Fluorides coated Ni-rich cathode materials with enhanced surficial chemical stability for advanced lithium-ion battery
36. Surface stabilization with fluorine of layered ultrahigh-nickel oxide cathodes for lithium-ion batteries10.1021/acs.chemmater.2c00301 ↗
37. A synergistic effect of Na+ and Al3+ dual doping on electrochemical performance and structural stability of LiNi0.88Co0.08Mn0.04O2 cathodes for Li-ion batteries10.1021/acsami.1c16042 ↗
38. Structural design of high-performance Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials enhanced by Mg2+ doping and Li3PO4 coating for lithium ion battery10.1016/j.jcis.2021.09.067 ↗
39. Enhancing thermal and high-voltage cycling stability of Ni-rich layered cathodes through a Ti-doping-induced surface-disordered structure10.1021/acsaem.2c02305 ↗
40. Improving Li+ kinetics and structural stability of nickel-rich layered cathodes by heterogeneous inactive-Al3+ doping10.1021/acssuschemeng.8b00909 ↗
41. Role of Al on the electrochemical performances of quaternary nickel-rich cathode LiNi0.8Co0.1Mn0.1−xAlxO2 (0 ≤ x ≤ 0.06) for lithium-ion batteries10.1016/j.jelechem.2021.115200 ↗
42. Long-lasting Ni-rich NCMA cathodes via simultaneous microstructural refinement and surface modification10.1021/acsenergylett.3c00083 ↗
43. Preparation of long-term cycling stable ni-rich concentration–gradient NCMA cathode materials for li-ion batteries10.1016/j.jcis.2023.02.064 ↗
44. Quaternary layered Ni-rich NCMA cathode for lithium-ion batteries10.1021/acsenergylett.8b02499 ↗
45. Understanding electrochemical performance enhancement with quaternary NCMA cathode materials10.1021/acs.langmuir.3c02857 ↗
46. Effects of Al content on the electrochemical performance and thermal stability of Li(Ni0.9Co0.06Mn0.04)1−xAlxO2 cathode materials for Li-ion batteries10.1007/s11581-023-04929-9 ↗
47. Inhibition of the bioavailability of heavy metals in sewage sludge biochar by adding two stabilizers
48. A. Vesel, M. Modic, M. Mozetic. Biocompatibility of Polymer Surfaces Treated in SO2 or H2S Plasma.
49. Comparative Raman spectroscopy study of sulfonate-substituted triphenylphosphines10.1016/S0924-2031(99)00035-1 ↗
50. Interaction of SO2 with ZnO nanoshapes: impact of surface polarity10.1021/acs.jpcc.9b02155 ↗
51. Edge-protected Ni-enriched LiNixCoyMnzO2 cathode materials by interface modification with a Si- and F-functionalized surface modifier10.1021/acssuschemeng.2c06720 ↗
52. The role of boracic polyanion substitution on structure and high voltage electrochemical performance of Ni-rich cathode materials for lithium ion batteries10.1016/j.jallcom.2019.05.090 ↗
53. Surface-modified quaternary layered Ni-rich cathode materials by Li2ZrO3 for improved electrochemical performance for high-power Li-ion batteries10.1021/acsaem.2c00224 ↗
54. Optimizing the structure of layered cathode material for higher electrochemical performance by elucidating structural evolution during heat processing10.1016/j.nanoen.2020.105194 ↗
55. Achieving a bifunctional conformal coating on nickel-rich cathode LiNi0.8Co0.1Mn0.1O2 with half-cyclized polyacrylonitrile10.1016/j.electacta.2021.138440 ↗
56. A comparison of voltage hold and voltage decay methods for side reactions characterization10.1149/1945-7111/accb69 ↗
57. Effective and low-cost in situ surface engineering strategy to enhance the interface stability of an ultrahigh Ni-rich NCMA cathode10.1021/acsami.2c12889 ↗
58. Modifying surface chemistry and stress concentration to enable highly stable ultrahigh-Ni cathodes
59. Super Ni-rich and Co-poor LiNixCoyMn1-x-yO2, LiNixCoyAl1-x-yO2, and LiNixCoyMnzAl1-x-y-zO2 (x ≥ 0.85) based cathodes for lithium-ion batteries: a review on emerging trends, recent developments, and future perspectives10.1016/j.est.2024.112612 ↗
60. Rock-salt growth-induced (003) cracking in a layered positive electrode for Li-ion batteries10.1021/acsenergylett.7b00907 ↗
61. Activated carbon-embedded reduced graphene oxide electrodes for capacitive desalination10.33961/jecst.2023.00066 ↗
62. Investigation of the electrode-electrolyte interphase in ester-based electrolytes in NCM523/Graphite cells10.1149/1945-7111/ac5a19 ↗
63. Replacing conventional battery electrolyte additives with dioxolone derivatives for high-energy-density lithium-ion batteries10.1038/s41467-021-21106-6 ↗
64. Stable electrode/electrolyte interface for high-voltage NCM 523 cathode constructed by synergistic positive and passive approaches10.1021/acsami.1c15690 ↗
65. Direct regeneration method of spent LiNi1/3Co1/3Mn1/3O2 cathode materials via surface lithium residues10.1039/D1GC03526F ↗
66. A composite surface configuration towards improving cycling stability of Li-rich layered oxide materials10.1039/D1TA06971C ↗
67. Triallyl borate as an effective separator/cathode interphase modifier for lithium-ion batteries10.33961/jecst.2023.00150 ↗
68. Cation-ordered Ni-rich positive electrode material with superior chemical and structural stability enabled by atomic substitution for lithium-ion batteries10.1016/j.cej.2023.147181 ↗
69. Triphenyl phosphate as an efficient electrolyte additive for Ni-rich NCM cathode materials10.33961/jecst.2020.00850 ↗
70. Effective separation of LiNi0.5Co0.2Mn0.3O2 cathode material and Al foil via digestion of PVDF enabling a closed-loop recycle10.1039/D2TA06959H ↗