journal article·2025-03Open access

Impact of power profile on activation of proton exchange membrane electrolyzer cell

Andrej Zvonimir Tomić, Ivan Pivac, Frano Barbir

Abstract

The study examines how operating parameters affect the activation of a proton exchange membrane electrolyzer during the initial operation of a membrane electrode assembly utilizing Nafion 115 ionomer. Previous research has shown that activating the membrane electrode assembly improves its performance by creating ion channels within the ionomer and expanding the electrochemically active surface. However, there is currently no scientific literature investigating the membrane electrode assembly activation of the electrolyzer, and there are no standardized procedures for activating the device before degradation tests. Therefore, a commercial single cell electrolyzer and commercial membrane electrode assemblies were used to investigate the impact of different power supply profiles and operating temperatures on the activation process. The electrochemically active surface area, membrane resistance, and current density at 2 V were measured and analyzed to evaluate different activation procedures. The results indicate that all the activation procedures lead to completion of activation within 32 h, but with different effects on the degree of change. Power profiles with the faster set point changes resulted in significant performance and stability improvements. The membrane electrode assembly was activated after 10 and 12 h of conditioning at 60 °C, with slightly less time required at 75 °C. • Impact of operating parameters on the activation of the PEM electrolyzer was examined. • Activation of the electrolyzer MEA was controlled using potentiostatic operation mode. • The power profiles showed the characteristic dynamics of the measured quantities. • Maintaining a constant operating point negatively affects PEM electrolyzer activation. • The activation process of the PEM electrolyzer can be completed within 12 h.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hybrid Renewable Energy Systems · Hydrogen Storage and Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Malkow · 2020
2. Malkow · 2018
3. A review of testing procedures for proton exchange membrane electrolyzer degradation
4. Tsotridis · 2021
5. Efficient multi-metallic anode catalysts in a PEM water electrolyzer10.1016/j.ijhydene.2013.11.076 ↗
6. Micro-protective layer for lifetime extension of solid polymer electrolyte water electrolysis10.1016/j.jpowsour.2012.01.045 ↗
7. A novel PEMEC with 3D printed non-conductive bipolar plate for low-cost hydrogen production from water electrolysis10.1016/j.enconman.2018.12.046 ↗
8. The stability challenge on the pathway to high-current-density polymer electrolyte membrane water electrolyzers10.1016/j.electacta.2018.04.154 ↗
9. Influence of the operation mode on PEM water electrolysis degradation10.1016/j.ijhydene.2019.09.169 ↗
10. Influence of iridium oxide loadings on the performance of PEM water electrolysis cells: Part I-Pure IrO2-based anodes10.1016/j.apcatb.2015.09.013 ↗
11. Online measurements of fluoride ions in proton exchange membrane water electrolysis through ion chromatography
12. Failure of PEM water electrolysis cells: case study involving anode dissolution and membrane thinning10.1016/j.ijhydene.2014.05.043 ↗
13. Performance enhancement of PEM electrolyzers through iridium-coated titanium porous transport layers10.1016/j.elecom.2018.10.021 ↗
14. Durable membrane electrode assemblies for proton exchange membrane electrolyzer systems operating at high current densities10.1016/j.electacta.2016.04.164 ↗
15. Investigation on the degradation of MEAs for PEM water electrolysers part I: effects of testing conditions on MEA performances and membrane properties10.1016/j.ijhydene.2016.07.125 ↗
16. Exploring the impacts of conditioning on proton exchange membrane electrolyzers by in situ visualization and electrochemistry characterization10.1021/acsami.1c21849 ↗
17. Cathode starvation as an accelerated conditioning procedure for perfluorosulfonic acid ionomer fuel cells
18. 2006
19. Equipments and methods for accelerating the activation of fuel cell
20. Preconditioning membranes of a fuel cell stack
21. Voss H · 2003
22. Zhang · 2018
23. Activation mechanisms in the catalyst coated membrane of PEM fuel cells10.1016/j.pecs.2021.100924 ↗
24. A review on progress in the field of conditioning of polymer fuel cell stacks
25. Fundamental and practical aspects of break-in/conditioning of proton exchange membrane fuel cells
26. Activation of proton-exchange membrane fuel cells via CO oxidative stripping10.1016/j.jpowsour.2005.02.094 ↗
27. Advances in rapid and effective break-in/conditioning/recovery of automotive PEMFC stacks
28. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
29. Orientation of drawn Nafion at molecular and mesoscopic scales10.1021/ma035642w ↗
30. Elimination of orientation in perfluorinated ionomer membranes
31. Water transport and sorption in nafion membrane10.1021/bk-2012-1096.ch011 ↗
32. Hyflon Ion membranes for fuel cells10.1021/ie058008a ↗
33. Interplay between structure and relaxations in perfluorosulfonic acid proton conducting membranes10.1021/ja3099799 ↗
34. Investigation of ionomer structure through its dependence on ion exchange capacity (IEC)10.1016/j.memsci.2011.10.041 ↗
35. Effect of contaminants on polymer electrolyte membrane fuel cells10.1016/j.pecs.2010.06.003 ↗
36. Ion and water transport characteristics in membranes for polymer electrolyte fuel cells containing H + and Ca2 + cations10.1149/1.1837890 ↗
37. The effect of impurity cations on the transport characteristics of perfluorosulfonated ionomer membranes10.1021/jp983762d ↗
38. Cerium migration through hydrogen fuel cells during accelerated stress testing10.1149/2.008404eel ↗