journal article·2025-02

Li3FeF6/Fe2O3, LiF anchored oxidized multi-wall carbon nanotubes as high power cathode in lithium ion batteries

Anna Basa, Daria Tatko, Katarzyna Lapinska, Agnieszka Zofia Wilczewska, Jakub Goclon, Krzysztof Winkler, Alois Kuhn, Flaviano García-Alvarado

Publisher page

Abstract

The α-Li 3FeF 6/Fe 2O 3,LiF/ox-MWCNTs composite has been investigated for the first time as a cathode material for lithium batteries. Due to the insulating properties of α-Li 3FeF 6, Li + intercalation requires the activation of the material and the incorporation of conductive additives. In this work, thermal treatment is used as a new approach to activate α-Li 3FeF 6. Heating leads to the removal of adsorbed water from the surface of the nanoparticles, the formation of an α-Li 3FeF 6/Fe 2O 3/LiF surface layer, and an increase in the specific capacity. Further improvement of the electrochemical properties was achieved by anchoring Li 3FeF 6 nanoparticles on oxidized multi-wall carbon nanotubes (ox-MWCNTs), combined with an increased material surface area and improved lithium transport properties during repeated discharge-charge cycling. Theoretical modelling of the α-Li 3FeF 6/ox-CNTs interface indicates good electronic conductivity of the α-Li 3FeF 6/ox-MWCNTs. Functional groups attached to the nanotubes form covalent bonds with unsaturated iron sites on the surface, thus stabilizing the mutual interaction between the components and facilitating the charge transfer. The incorporation of α-Li 3FeF 6/Fe 2O 3, LiF into the oxidized MWCNTs lattice results in an improvement in the specific capacity, and a high initial discharge capacity of 138 mAh/g at 0.02 C (close to the theoretical capacity of 141 mAh/g) was obtained.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Crystal structure and electrochemical properties of A2MPO4F fluorophosphates (A = Na, Li; M = Fe, Mn, Co, Ni)10.1021/cm902023h ↗
2. A 3.6 V lithium-based fluorosulphate insertion positive electrode for lithium-ion batteries10.1038/nmat2590 ↗
3. Metal fluoride cathode materials for lithium rechargeable batteries: focus on iron fluorides
4. A cathode material based on the iron fluoride with an ultra-thin Li3FeF6 protective layer for high-capacity Li-ion batteries10.1016/j.jpowsour.2017.07.091 ↗
5. Direct synthesis of Cryolite type Li3FeF6 and its characterization as positive electrode in Li cell
6. On the room temperature synthesis of monoclinic Li3FeF6: a new cathode material for rechargeable lithium batteries10.1016/j.jpowsour.2010.02.040 ↗
7. A comparative study of α- and β-Li3FeF6: structure and electrochemical behavior10.1149/1.3454238 ↗
8. Sol-gel processing and electrochemical characterization of monoclinic Li3FeF610.1007/s10971-014-3329-1 ↗
9. Facile synthesis of β-Li3VF6: a new electrochemically active lithium insertion material10.1016/j.jpowsour.2012.01.148 ↗
10. Synthesis of ternary transition metal fluorides Li3MF6 via a sol-gel route as candidates for cathode materials in lithium-ion batteries10.1039/c2jm32133e ↗
11. Sol-Gel processing and electrochemical conversion of inverse spinel-type Li2NiF410.1149/2.0591504jes ↗
12. Electrochemical characterization of monoclinic and orthorhombic Li3CrF6 as positive electrodes in lithium-ion batteries synthesized by a sol-gel process with environmentally benign chemicals10.1016/j.jpowsour.2015.06.036 ↗
13. Direct synthesis of trirutile-type LiMgFeF6 and its electrochemical characterization as positive electrode in lithium-ion batteries10.1016/j.jpowsour.2014.10.151 ↗
14. Sol-Gel based synthesis of LiNiFeF6 and its electrochemical characterization10.1149/2.070406jes ↗
15. Unravelling the mechanism of lithium insertion into and extraction from trirutile-type LiNiFeF6 cathode material for Li-ion batteries10.1039/C5CE00989H ↗
16. Electrochemical characterization of LiMnFeF6 for use as positive electrode in lithium-ion batteries10.1149/2.0651412jes ↗
17. LiCaFeF6: a zero-strain cathode material for use in Li-ion batteries10.1016/j.jpowsour.2017.07.007 ↗
18. Synthesis of FeOF using roll-quenching method and the cathode properties for lithium-ion battery10.1016/j.jpowsour.2013.06.053 ↗
19. VO2F: a new transition metal oxyfluoride with high specific capacity for Li ion batteries10.1039/C5TA05434F ↗
20. Reaching the full capacity of the electrode material Li3FeF6 by decreasing the particle size to nanoscale10.1016/j.jpowsour.2011.09.048 ↗
21. Carbon coating of air-sensitive insulating transition metal fluorides: an example study on α-Li3FeF6 high-performance cathode for lithium ion batteries10.1016/j.jmst.2019.10.002 ↗
22. Enhanced charge storage of Li3FeF6 with carbon nanotubes for lithium-ion batteries10.1039/C6RA23941B ↗
23. Ball milling effect on the structure of single-wall carbon nanotubes10.1016/j.carbon.2004.02.031 ↗
24. Electrostatic spray deposition of porous Fe2O3 thin films as anode material with improved electrochemical performance for lithium-ion batteries10.1016/j.jpowsour.2009.03.063 ↗
25. General method to predict voltage-dependent ionic conduction in a solid electrolyte coating on electrodes10.1103/PhysRevB.91.134116 ↗
26. Conformal lithium fluoride protection layer on three-dimensional lithium by nonhazardous gaseous reagent freon10.1021/acs.nanolett.7b01020 ↗
27. Recent progress in LiF materials for safe lithium metal anode of rechargeable batteries: is LiF the key to commercializing Li metal batteries?10.1016/j.ceramint.2018.09.287 ↗
28. A modified LiF coating process to enhance the electrochemical performance characteristics of LiNi0.8Co0.1Mn0.1O2 cathode materials10.1016/j.matlet.2013.07.098 ↗
29. Enhanced electrochemical performance of LiF-modified LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries10.1016/j.jpowsour.2012.10.065 ↗
30. Modification study of LiF coating on cobalt-free nickel-rich LiNi0.9Mn0.1O2 layered oxide cathode materials for lithium-ion batteries10.1007/s11581-023-05039-2 ↗
31. Defect and dopant properties of the α- and β-polymorphs of the Li3FeF6 lithium battery material10.1039/c3ta10630f ↗
32. Advanced capabilities for materials modelling with QUANTUM ESPRESSO10.1088/1361-648X/aa8f79 ↗
33. Quantum ESPRESSO: a modular and open-source software project for quantum simulations of materials10.1088/0953-8984/21/39/395502 ↗
34. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
35. Soft self-consistent pseudopotentials in a generalized eigenvalue formalism10.1103/PhysRevB.41.7892 ↗
36. Effect of the damping function in dispersion corrected density functional theory10.1002/jcc.21759 ↗
37. Special points for brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
38. Electron-energy-loss spectra and the structural stability of nickel oxide: an LSDA+U study10.1103/PhysRevB.57.1505 ↗
39. Linear response approach to the calculation of the effective interaction parameters in the LDA+U method10.1103/PhysRevB.71.035105 ↗
40. DFT and hybrid-DFT calculations on the electronic properties of vanadate materials: theory meets experiments10.1039/D0NJ02316G ↗
41. Hexafluoroferrites M3FeF6 (M=Li, Na, K, Rb, Cs, Ag, Tl, NH4) - magnetic, spectroscopic and radiocrystallographic study10.1016/0022-1902(70)80495-X ↗
42. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
43. Computer graphics and graphical user interfaces as tools in simulations of matter at the atomic scale10.1016/S0927-0256(03)00104-6 ↗
44. Light at the interface: the potential of attenuated total reflection infrared spectroscopy for understanding heterogeneous catalysis in water10.1039/c0cs00014k ↗
45. Topic review: application of Raman spectroscopy characterization in micro/nano-machining10.3390/mi9070361 ↗
46. Raman spectroscopy of Fe2O3 to 62 GPa10.2138/am-2002-2-314 ↗
47. Investigation on magnetic properties of α-Fe2O3 nanoparticles synthesized under surfactant-free condition by hydrothermal process10.1016/j.jallcom.2010.03.245 ↗
48. Experimental evidence concerning the significant information depth of X-ray diffraction (XRD) in the Bragg-Brentano configuration10.1017/S0885715623000052 ↗
49. Syntheses of carbon nanotube-metal oxides composites; adsorption and photo-degradation
50. Completely green synthesis of silver nanoparticle decorated MWCNT and its antibacterial and catalytic properties10.1515/pac-2015-0602 ↗
51. Molecular composition of iron oxide nanoparticles, precursors for magnetic drug targeting, as characterized by confocal Raman microspectroscopy10.1039/b419004a ↗
52. Pseudocapacitive oxide materials for high-rate electrochemical energy storage10.1039/c3ee44164d ↗
53. Comparative issues of cathode materials for Li-ion batteries10.3390/inorganics2010132 ↗
54. Recent advancements in development of different cathode materials for rechargeable lithium ion batteries10.1016/j.est.2021.103112 ↗
55. Design of high-performance and sustainable Co-free Ni-rich cathodes for next-generation lithium-ion batteries10.1002/sus2.176 ↗
56. Carbon nanotube (CNT)-based composites as electrode material for rechargeable Li-ion batteries: a review10.1016/j.compscitech.2011.11.019 ↗
57. Noguera · 1996
58. Amorphous and crystalline vanadium orthophosphate and oxidized multiwalled carbon nanotube composites as anode materials in sodium-ion batteries10.1002/celc.202200733 ↗
59. Oxidized MWCNTs as an oxidizing agent and dopant in MWCNT@polypyrrole composite formation10.1002/celc.202100566 ↗
60. Structural, vibrational and electronic properties of defective single-walled carbon nanotubes functionalised with carboxyl groups: theoretical studies10.1002/cphc.201500364 ↗