Pt/CeO2 Cocatalyst and porogen enhance performance of high-temperature proton exchange membrane fuel cells
Source abstract
Abstract
To address the issue of the slow oxygen reduction reaction (ORR) kinetics in high-temperature proton exchange membrane fuel cells (HT-PEMFCs), 0.2 wt% Pt/CeO 2 nanoparticles with oxygen vacancies are synthesized and incorporated into the cathode catalyst layer to enhance performance. Tests with 25 cm 2 single-cells reveal a significant enhancement in HT-PEMFCs performance with the addition of Pt/CeO 2, reaching a peak power density of 432 mW/cm 2 at 160 °C, compared to 352 mW/cm 2 without the particles. Electrochemical impedance spectroscopy (EIS) analyses show a reduction in charge transfer resistance, suggesting improved O 2 activation. Additionally, oxygen diffusion is identified as a limiting factor in membrane electrode assembly (MEA) performance. To further enhance performance, ammonium oxalate is introduced as a pore-forming agent in the catalyst layer, increasing gas diffusion and reducing concentration polarization. Combining 10 % Pt/CeO 2 with 20 % ammonium oxalate increases the maximum power density to 467 mW/cm 2, a 33 % improvement over pure catalysts. Structural analyses reveal that the pore-forming agent effectively alters the pore size distribution. This research highlights the potential of Pt/CeO 2 in accelerating ORR kinetics, enhancing HT-PEMFCs performance, and providing valuable insights for the design of catalyst layer additives in HT-PEMFCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Development of highly active and durable platinum core-shell catalysts for polymer electrolyte fuel cells10.1627/jpi.58.55 ↗
2. Gas crossover and membrane degradation in polymer electrolyte fuel cells10.1016/j.electacta.2006.03.008 ↗
3. A review on methanol crossover in direct methanol fuel cells: challenges and achievements10.1002/er.1889 ↗
4. Formic acid as a hydrogen energy carrier10.1021/acsenergylett.6b00574 ↗
5. Zhang · 2020
6. High-capacity LiNi0.8Co0.1Mn0.1O2 positive-electrodes in the nearly saturated and fluorinated acetate-diluted electrolyte solutions10.1021/acsaem.3c03119 ↗
7. Solvation-controlled ester-based concentrated electrolyte solutions for high-voltage lithium-ion batteries10.1016/j.coelec.2018.03.032 ↗
8. Dilution of highly concentrated LiBF4/propylene carbonate electrolyte solution with fluoroalkyl ethers for 5-V LiNi0.5Mn1.5O4Positive electrodes10.1149/2.0611701jes ↗
9. Main factors affecting the lifetime of Proton Exchange Membrane fuel cells in vehicle applications: a review10.1016/j.apenergy.2014.03.048 ↗
10. Fuel cell-battery hybrid systems for mobility and off-grid applications: a review10.1016/j.rser.2020.110119 ↗
11. Quantifying desorption and rearrangement rates of carbon monoxide on a PEM fuel cell electrode10.1016/j.electacta.2009.04.049 ↗
12. PEM fuel cell reaction kinetics in the temperature range of 23-120°C10.1016/j.electacta.2006.09.008 ↗
13. Long term testing in continuous mode of HT-PEMFC based H3PO4/PBI celtec-P MEAs for μ-CHP applications10.1002/fuce.200800134 ↗
14. Operando synchrotron-based X-ray study and intervention approaches of graphene-related-materials for investigating the performance and durability of HT-PEMFC10.1016/j.cej.2024.150670 ↗
15. Performance analysis of HT-PEFC stacks10.1016/j.ijhydene.2012.02.190 ↗
16. Fabrication of novel binderless anode via electrophoretic deposition for HT-PEMFC10.1080/02670844.2019.1597426 ↗
17. Catalyst development for high‐temperature polymer electrolyte membrane fuel cell (HT‐PEMFC) applications10.1002/adma.202302207 ↗
18. Corrigendum to “Computational analysis of the impact of a micro porous layer (MPL) on the characteristics of a high temperature PEMFC”10.1016/j.electacta.2020.135704 ↗
19. CO2 as a hydrogen vector - transition metal diamine catalysts for selective HCOOH dehydrogenation10.1039/C6DT04638J ↗
20. Benchmarking catalysts for formic acid/formate electrooxidation10.3390/molecules26164756 ↗
21. Structural analysis of transient reaction intermediate in formic acid dehydrogenation catalysis using two-dimensional IR spectroscopy10.1073/pnas.1809342115 ↗
22. Unveiling the pressure dependent deactivation mechanism of iridium-based catalysts for hydrogen production from formic acid aqueous solutions10.1016/j.ijhydene.2024.05.406 ↗
23. Huang · 2022
24. Huang Kuo-Wei Sa · 2021
25. Maximizing the efficiency of a HT-PEMFC system integrated with glycerol reformer10.1016/j.ijhydene.2012.01.089 ↗
26. Theoretical analysis of a glycerol reforming and high-temperature PEMFC integrated system: hydrogen production and system efficiency10.1016/j.fuel.2012.07.036 ↗
27. Recent progress of antipoisoning catalytic materials for high temperature proton exchange membrane fuel cells doped with phosphoric acid10.1039/D3IM00101F ↗
28. Advancement in distribution and control strategy of phosphoric acid in membrane electrode assembly of high-temperature polymer electrolyte membrane fuel cells10.3866/PKU.WHXB202010071 ↗
29. Effects of concentrated CO2 on the performance of a PBI/H3PO4 high temperature proton exchange membrane fuel cell10.1016/j.jpowsour.2024.235053 ↗
30. Poly(2,5-benzimidazole)–silica nanocomposite membranes for high temperature proton exchange membrane fuel cell10.1016/j.memsci.2012.04.018 ↗
31. Polybenzimidazole/SiO2 hybrid membranes for high temperature proton exchange membrane fuel cells10.1016/j.ijhydene.2016.02.043 ↗
32. Synergistically integrated phosphonated poly(pentafluorostyrene) for fuel cells10.1038/s41563-020-00841-z ↗
33. Polybenzimidazole/cerium dioxide/graphitic carbon nitride nanosheets for high performance and durable high temperature proton exchange membranes10.1016/j.memsci.2021.119760 ↗
34. Enhanced conductivity and stability of composite membranes based on poly (2,5-benzimidazole) and zirconium oxide nanoparticles for fuel cells10.1016/j.jpowsour.2010.09.028 ↗
35. Performance and durability of high temperature proton exchange membrane fuel cells with silicon carbide filled polybenzimidazole composite membranes10.1016/j.jpowsour.2023.233835 ↗
36. Development and performance analysis of polybenzimidazole/boron nitride composite membranes for high‐temperature PEM fuel cells10.1002/er.7418 ↗
37. One-pot synthesis of Pt/CeO2/C catalyst for improving the ORR activity and durability of PEMFC10.1016/j.ijhydene.2017.04.039 ↗
38. Modification of electrodes using Al2O3 to reduce phosphoric acid loss and increase the performance of high-temperature proton exchange membrane fuel cells10.1039/c2ta00492e ↗
39. Materials engineering toward durable electrocatalysts for proton exchange membrane fuel cells10.1002/aenm.202102665 ↗
40. Enhancing cell performance and durability of high temperature polymer electrolyte membrane fuel cells by inhibiting the formation of cracks in catalyst layers10.1149/1945-7111/ab9fe0 ↗
41. Effects of phosphotungstic acid on performance of phosphoric acid doped polyethersulfone-polyvinylpyrrolidone membranes for high temperature fuel cells10.1016/j.ijhydene.2020.07.082 ↗
42. Hybrid proton-conducting membranes for polymer electrolyte fuel cells10.1016/j.electacta.2005.02.029 ↗
43. CO2 hydrogenation on Pt, Pt/SiO2 and Pt/TiO2: importance of synergy between Pt and oxide support10.1016/j.jcat.2015.12.019 ↗
44. α-ZrP nanoreinforcement overcomes the trade-off between phosphoric acid dopability and thermomechanical properties: nanocomposite HTPEM with stable fuel cell performance10.1021/acsami.9b09405 ↗
45. PTFE distribution in high-temperature PEM electrodes and its effect on the cell performance10.1149/05801.0881ecst ↗
46. Improvement of fuel cell performances through the enhanced dispersion of the PTFE binder in electrodes for use in high temperature polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2020.03.095 ↗
47. Design and study on pore structure of cathode double catalytic layer in high-temperature proton exchange membrane fuel cell
48. Improving the proton conductivity and water uptake of polybenzimidazole-based proton exchange nanocomposite membranes with TiO2 and SiO2 nanoparticles chemically modified surfaces10.1016/j.jpowsour.2010.10.082 ↗
49. Significantly improved stability and water retention for Pt supported on W-doped SnO2 to catalyse the oxygen reduction reaction in proton exchange membrane fuel cells10.1039/D4TA00388H ↗
50. Potential-induced pitting corrosion of an IrO2(110)-RuO2(110)/Ru(0001) model electrode under oxygen evolution reaction conditions
51. CeO2/Pt(111) interface studied using first-principles density functional theory calculations10.1103/PhysRevB.84.045412 ↗
52. Adsorption and activation of CO2 on Pt/CeOx/TiO2(110): role of the Pt-CeOx interface10.1016/j.susc.2021.121852 ↗
53. Heterogeneous Ir3Sn–CeO2/C as alternative Pt-free electrocatalysts for ethanol oxidation in acidic media10.1016/j.ijhydene.2016.12.139 ↗
54. Bifunctional catalytic material: an ultrastable and high-performance surface defect CeO2 nanosheets for formaldehyde thermal oxidation and photocatalytic oxidation10.1016/j.apcatb.2015.08.047 ↗
55. Instantaneous free radical scavenging by CeO2 nanoparticles adjacent to the Fe−N4 active sites for durable fuel cells10.1002/anie.202306166 ↗
56. Deciphering dynamic structural and mechanistic complexity in Cu/CeO2/ZSM-5 catalysts for the reverse water-gas shift reaction10.1021/acscatal.0c01584 ↗
57. Atomically dispersed Pt/CeO2 catalyst with superior CO selectivity in reverse water gas shift reaction10.1016/j.apcatb.2021.120101 ↗
58. Methanol adsorption and decomposition on Pt/CeO2(111)/Cu(111) thin film model catalyst10.1021/la101936b ↗
59. Distribution of relaxation Times analysis of high-temperature PEM fuel cell impedance spectra10.1016/j.electacta.2017.02.011 ↗
60. Influence of the discretization methods on the distribution of relaxation Times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
61. Effect of catalyst ink and formation process on the multiscale structure of catalyst layers in PEM fuel cells10.3390/app12083776 ↗
62. Activation methods and underlying performance boosting mechanisms within fuel cell catalyst layer10.1016/j.esci.2024.100254 ↗
63. Electrochemical characterization of a polybenzimidazole-based high temperature proton exchange membrane unit cell10.1016/j.jpowsour.2009.02.025 ↗
64. Properties of high-temperature PEFC Celtec®-P 1000 MEAs in start/stop operation mode10.1016/j.jpowsour.2007.08.055 ↗
65. Evaluation of Tafel–Volmer kinetic parameters for the hydrogen oxidation reaction on Pt(110) electrodes10.1016/j.jpowsour.2010.12.016 ↗
66. Sectional electrochemical impedance analysis of a high temperature polymer electrolyte membrane fuel cell with three types of flow-fields10.1016/j.electacta.2013.08.142 ↗
67. Electrochemical impedance spectroscopy of catalyst and carbon degradations in proton exchange membrane fuel cells10.1016/j.jpowsour.2019.226922 ↗
68. Use of electrochemical impedance spectroscopy for the evaluation of performance of PEM fuel cells based on carbon cloth gas diffusion electrodes10.1155/2018/3254375 ↗
69. Mechanism of Pt3Co nanocatalysts to improve the performance for oxygen reduction reactions: DFT study on oxygen adsorption and durability of different facets10.1016/j.mseb.2022.116202 ↗
70. DFT+U study on the oxygen adsorption and dissociation on CeO2-supported platinum cluster10.1016/j.apsusc.2013.10.015 ↗
71. Pivotal role of Ce3+ polarons on promoting oxygen reduction reaction activity of Pt1/CeO2 catalysts10.1016/j.jpowsour.2024.234393 ↗
72. Matsutsu · 2012