Ethyl 2-butene phosphite as a film-forming additive for high voltage lithium-ion batteries
Source abstract
Abstract
Increasing the charge cutoff voltage can significantly improve the capacity of lithium-ion batteries. However, the structural degradation of Ni-rich cathodes and high reactivity of electrolytes at the high-potential cathodes greatly affect the cycling stability. In this paper, a new type of cathode film-forming additive, ethyl 2-butene phosphite (EBP), is synthesized based on the molecular design of phosphite by increasing the functional group of carbon-carbon double bond and ring structure. Theoretical calculation shows that EBP has a higher HOMO level and can form a cathode electrolyte interphase (CEI) on the cathode electrode surface before the electrolyte in theory. The electrochemical performance of NCM622/Li half-cells is significantly enhanced by incorporating EBP into the electrolyte, achieving 72.52 % capacity retention over 100 cycles at 0.5C. Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS) and Energy Dispersive Spectroscopy (EDS) are used to characterize the morphology of the anode and cathode, revealing that EBP forms a dense and complete CEI film on the surface of the LiNi 0.6Co 0.2Mn 0.2O 2 electrode. This film effectively blocks direct contact between the electrolyte and the cathode active material, prevents the dissolution of transition metals, improves interfacial stability, and consequently enhances the high-voltage cycling performance of the battery.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. 30 Years of lithium-ion batteries10.1002/adma.201800561 ↗
2. Challenges and strategies of formulating low‐temperature electrolytes in lithium‐ion batteries10.1002/idm2.12077 ↗
3. Ten years left to redesign lithium-ion batteries10.1038/d41586-018-05752-3 ↗
4. Stress accumulation in Ni-rich layered oxide cathodes: origin, impact, and resolution10.1016/j.jechem.2021.05.048 ↗
5. Electrolyte system for high voltage Li-ion cells10.1149/2.0321613jes ↗
6. Measurement of parasitic reactions in Li ion cells by electrochemical calorimetry10.1149/2.021207jes ↗
7. Challenges facing lithium batteries and electrical double-layer capacitors10.1002/anie.201201429 ↗
8. Rotating ring-disc electrode measurements of manganese dissolution and capacity loss of Li1+xMn2−xO4 and Li1+xAlyMn2−x−yO4 spinel electrodes for lithium-ion batteries10.1016/j.jpowsour.2005.01.043 ↗
9. Solid-state redox reactions of LiCoO2 (R3m) for 4 volt secondary lithium cells10.1149/1.2059267 ↗
10. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
11. Investigation of changes in the surface structure of LixNi0.8Co0.15Al0.05O2 cathode materials induced by the initial charge10.1021/cm403332s ↗
12. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
13. Highly fluorinated Al-centered lithium salt boosting the interfacial compatibility of Li-metal batteries10.1021/acsenergylett.1c02489 ↗
14. High performance of low-temperature electrolyte for lithium-ion batteries using mixed additives10.1016/j.cej.2021.129400 ↗
15. Diphenyloctyl phosphate as a flame-retardant additive in electrolyte for Li-ion batteries10.1016/j.jpowsour.2007.08.098 ↗
16. Tris(hexafluoro-iso-propyl) phosphate as an SEI-forming additive on improving the electrochemical performance of the Li[Li0.2Mn0.56Ni0.16Co0.08]O2 cathode material10.1149/2.066302jes ↗
17. Study of triallyl phosphate as an electrolyte additive for high voltage lithium-ion cells10.1016/j.jpowsour.2015.06.151 ↗
18. Toward a durable solid electrolyte film on the electrodes for Li-ion batteries with high performance10.1016/j.nanoen.2019.06.011 ↗
19. Tris (2-(thiophen-2-yl) ethyl) phosphate to synergistically enhance electronic and ionic conductivities of cathode electrolyte interphase in high-voltage lithium ion batteries10.1016/j.electacta.2019.05.137 ↗
20. Molecular design of asymmetric cyclophosphamide as electrolyte additive for high-voltage lithium-ion batteries10.1021/acsenergylett.3c00504 ↗
21. Improving high‐voltage performance of a LiNi0.5Co0.2Mn0.3O2 cathode with triallyl phosphite as an electrolyte additive10.1002/celc.202101390 ↗
22. Triallyl phosphite as an electrolyte additive to improve performance at elevated temperature of LiNi0.6Co0.2Mn0.2O2/graphite cells10.1016/j.jelechem.2018.11.046 ↗
23. Computational screening of phosphite derivatives as high-performance additives in high-voltage Li-ion batteries10.1039/C6RA28268G ↗
24. Challenges with prediction of battery electrolyte electrochemical stability window and guiding the electrode – electrolyte stabilization10.1016/j.coelec.2018.10.015 ↗
25. Modeling insight into battery electrolyte electrochemical stability and interfacial structure10.1021/acs.accounts.7b00486 ↗
26. High-rate performance and suppressed voltage decay of Li and Mn-rich oxide cathode materials upon substitution of Mn with Co for Li-ion batteries
27. Modified cathode-electrolyte interphase toward high-performance batteries
28. Dynamic evolution of cathode electrolyte interphase (CEI) on high voltage LiCoO2 cathode and its interaction with Li anode10.1016/j.ensm.2018.02.016 ↗
29. A Growing appreciation for the role of LiF in the solid electrolyte interphase10.1002/aenm.202100046 ↗