journal article·2025-01

Dealloying derived duplex interfusion-phase CuZn alloys with enhanced lithiophilicity and structure stability for lithium metal anode

Derong Liu, Lei Xu, Hongning Liu, Jian Zhang, Yuanyuan Tao, Xiaoping Jiang, Jing Zhang, Man Zhang, Dongwei Li

Publisher page

Abstract

Constructing a three-dimensional lithiophilic skeleton is an effective strategy for solving the issues of huge volume change and uncontrollable dendrites growth during Li plating/stripping process. Herein, a vertically aligned duplex interfusion-phase Cu 5Zn 8 and Cu 0.64Zn 0.36 alloy micron sheet arrays are fabricated on the surface of Cu foam framework (MS-CuZn@CF) by electrodeposition, annealing and subsequent dealloying. The presence of lithiophilic CuZn alloy phases falls off the Li nucleation barrier and facilitates homogeneous Li deposition. Besides, the hierarchical structure consisted of micron sheet arrays and porous Cu skeleton can effectively reduce the local current density, thereby efficiently inhibiting Li dendrites growth. Meanwhile, the stable Cu 0.64Zn 0.36 phase and porous spaces assembled by Cu foam and vertical-aligned micron sheets can buffer volume change during repeated plating/stripping process. Accordingly, this lithiophilic host exhibits an excellent coulombic efficiency (CE) of 99.2 % for 400 cycles, and as well as the dendrite-free morphology. The symmetric cell demonstrates a high cycling stability at 1 mA cm −2 and 1 mAh cm −2 for 4000 h with an ultra-low overpotential of 3.7 mV. Even at a high current density of 10 mA cm −2, it can cycle stably for more than 3000 h. The full cell paired with LiFePO 4 cathode delivers an excellent capacity retention of 94.7 % after 600 cycles at 1 C. This hierarchical structure design with duplex alloy phase points to a new avenue for the development of alloy-type materials towards high-performance Li metal anodes.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanoporous metals and alloys · Supercapacitor Materials and Fabrication · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. A dual lithiated alloy interphase layer for high-energy–density lithium metal batteries10.1016/j.cej.2022.134637 ↗
2. Double-layered skeleton of Li alloy anchored on 3D metal foam enabling ultralong lifespan of Li anode under high rate10.1016/j.cclet.2023.109330 ↗
3. Hierarchical Li electrochemistry using alloy-type anode for high-energy-density Li metal batteries10.1038/s41467-024-45613-4 ↗
4. Multifunctional additives to realize dendrite-free lithium deposition in carbonate electrolytes toward low-temperature Li metal batteries10.1002/aenm.202400365 ↗
5. Boosting the temperature adaptability of lithium metal batteries via a moisture/acid-purified, ion-diffusion accelerated separator
6. In-situ construction of Li-Mg/LiF conductive layer to achieve an intimate lithium-garnet interface for all-solid-state Li metal battery
7. A fast and low-cost interface modification method to achieve high-performance garnet-based solid-state lithium metal batteries10.1016/j.nanoen.2021.106643 ↗
8. Synergistic effect of LixSi/Li3N artificial interface and 3D framework for enabling Dendrite-free, long-life lithium metal anodes10.1016/j.jcis.2024.07.057 ↗
9. LiZn/Li2O induced chemical confinement enabling dendrite‐free Li‐metal anode
10. In situ generation of Li3N concentration gradient in 3D carbon-based lithium anodes towards highly-stable lithium metal batteries10.1016/j.jechem.2022.09.025 ↗
11. Design and application of copper/lithium composite anodes for advanced lithium metal batteries10.1007/s12598-023-02477-9 ↗
12. MOF‐derived materials enabled lithiophilic 3D hosts for lithium metal anode — a Review10.1002/cjoc.202200816 ↗
13. Structural design of 3D current collectors for lithium metal anodes: a Review10.1002/chem.202304152 ↗
14. Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth10.1038/nenergy.2016.10 ↗
15. Conformal coating of lithium-zinc alloy on 3D conducting scaffold for high areal capacity dendrite-free lithium metal batteries10.1016/j.carbon.2021.05.002 ↗
16. Nitrogen‐doped amorphous Zn–carbon multichannel fibers for stable lithium metal anodes10.1002/anie.202100471 ↗
17. Homogenous lithium plating/stripping regulation by a mass-producible Zn particles modified Li-metal composite anode10.1007/s12274-021-3326-y ↗
18. Lithiophilic Zn sites in porous CuZn alloy induced uniform Li nucleation and dendrite-free Li metal deposition10.1021/acs.nanolett.0c00352 ↗
19. Synergetic regulation of SEI mechanics and crystallographic orientation for stable lithium metal pouch cells10.1038/s41467-024-48889-8 ↗
20. Manipulating the diffusion energy barrier at the lithium metal electrolyte interface for dendrite-free long-life batteries10.1038/s41467-024-47521-z ↗
21. Arrays of hierarchical zincophilic nanorods with trapping‐and‐leveling deposition for ultrastable Zn metal anodes10.1002/aenm.202400276 ↗
22. Ultrathin lithiophilic 3D arrayed skeleton enabling spatial‐selection deposition for dendrite‐free lithium anodes
23. Duplex interpenetrating-phase FeNiZn and FeNi3 heterostructure with low-gibbs free energy interface coupling for highly efficient overall water splitting10.1007/s40820-023-01066-w ↗
24. Preparation of three‐dimensional copper‐zinc alloy current collector by powder metallurgy for lithium metal battery anode10.1002/celc.202100561 ↗
25. Stabilizing nucleation seeds in Li metal anode via ion-selective graphene oxide interfaces10.1016/j.ensm.2023.01.045 ↗
26. 3D hierarchical porous current collector via deposition-dealloying method for lithium metal anode10.1016/j.elecom.2024.107702 ↗
27. Lithiophilic 3D porous CuZn current collector for stable lithium metal batteries10.1021/acsenergylett.9b01987 ↗
28. Multiple protective layers for suppressing Li dendrite growth and improving the cycle life of anode-free lithium metal batteries10.1016/j.cej.2024.149547 ↗
29. Lithiophilic CuO nanoflowers on Ti‐mesh inducing lithium lateral plating enabling stable lithium‐metal anodes with ultrahigh rates and ultralong cycle life10.1002/aenm.201900853 ↗
30. In situ reaction fabrication of a mixed‐ion/electron‐conducting skeleton toward stable lithium metal anodes10.1002/eem2.12614 ↗
31. 3D porous Cu–Zn alloys as alternative anode materials for Li‐ion batteries with superior low T performance
32. Vertically standing MnO2 nanowalls grown on AgCNT-modified carbon fibers for high-performance supercapacitors10.1021/acssuschemeng.8b04176 ↗
33. Double-layered skeleton of Li alloy anchored on 3D metal foam enabling ultralong lifespan of Li anode under high rate10.1016/j.cclet.2023.109330 ↗
34. In situ formed LiZn alloy skeleton for stable lithium anodes10.1021/acsami.0c04092 ↗
35. Highly reversible Li metal anode using a binary alloy interface10.1039/D2CC05051J ↗
36. Tuning intrinsic lithiophilicity of copper foil to improve electrochemical performance of anode-free Li metal battery10.1016/j.est.2024.110880 ↗
37. Highly lithiophilic and structurally stable Cu–Zn alloy skeleton for high-performance Li-rich ternary anodes10.1016/j.jcis.2023.08.058 ↗
38. Nanoscale localized growth of SnSb for general-purpose high performance alkali (Li, Na, K) ion storage10.1016/j.cej.2021.134318 ↗
39. Fast Li+ transport of Li−Zn alloy protective layer enabling excellent electrochemical performance of Li metal anode10.1002/batt.202000125 ↗
40. A lithiophilic AlN-modified copper layer for high-performance lithium metal anodes10.1039/D2TA02138B ↗
41. Achieving high‐power and dendrite‐free lithium metal anodes via interfacial ion‐transport‐rectifying pump10.1002/aenm.202203912 ↗
42. In-situ construction of lithium-tin alloy skeleton as a lithiophilic host for lithium metal anode10.1016/j.electacta.2023.143504 ↗
43. Superdense lithium deposition via mixed ionic/electronic conductive interfaces implanted in vivo/vitro for stable lithium metal batteries10.1002/aenm.202400202 ↗
44. Porous lithiophilic Cu-Sn solid solution current collector for dendrite-free lithium metal batteries
45. Lithiophilic anchor points enabling endogenous symbiotic Li3N interface for homogeneous and stable lithium electrodeposition10.1016/j.nanoen.2021.106836 ↗
46. Dealloying-derived TiC hierarchical porous frameworks as stable host for advanced Li metal electrode10.1016/j.electacta.2023.143380 ↗
47. Stable Li deposition of 3D highstrength-lithiophilicity-porous CuZn current collector with gradient structure10.1016/j.jallcom.2023.169953 ↗
48. Lithiophilic Zn sites in porous CuZn alloy induced uniform Li nucleation and dendrite-free Li metal deposition10.1021/acs.nanolett.0c00352 ↗
49. Preparation of three‐dimensional copper‐zinc alloy current collector by powder metallurgy for lithium metal battery anode10.1002/celc.202100561 ↗
50. A multifunctional Cu6Sn5 interface layer for dendritic-free lithium metal anode10.1016/j.jcis.2021.07.108 ↗
51. Lithiophilic Li-Zn alloy modified 3D Cu foam for dendrite-free lithium metal anode10.1016/j.jpowsour.2020.228520 ↗
52. Facile decoration of fluorinated metal–organic frameworks on copper foil for regulated lithium deposition and robust solid electrolyte interface10.1016/j.jcis.2023.08.187 ↗
53. Compressible and elastic reduced graphene oxide sponge for stable and dendrite-free lithium metal anodes10.1021/acs.nanolett.3c03973 ↗
54. Regulated lithium deposition behavior by an artificial coating of Cu foil for dendrite-free lithium metal batteries
55. Construction of lithophilic solid electrolyte interfaces with a bottom-up nucleation barrier difference for low-N/P ratio Li-metal batteries10.1016/j.ensm.2022.11.022 ↗
56. LiF-rich interfacial protective layer enables air-stable lithium metal anodes for dendrite-free lithium metal batteries10.1021/acsami.3c06007 ↗