journal article·2025-01

Constructing high performance dry-processing oxide composite electrolyte via interfacial interactions for durable solid-state lithium batteries

Zhen Zeng, Qing Sun, Jun Cheng, Yuanyuan Li, Hongqiang Zhang, Xiao Xu, Lijie Ci, Deping Li

Publisher page

Abstract

Composite solid electrolytes (CSEs) have considerable combination properties, which have been considered as the most promising choice for realizing advanced solid-state lithium batteries. Yet the ionic conductivity of CSEs fails to meet the practical requirements. Herein, we develop a dry-processing CSEs based on Li 1.5Al 0.5Ge 1.5(PO 4) 3 (LAGP) and succinonitrile (SN) through polytetrafluoroethylene fibrillation. On the one hand, SN can enable fast ion transport in ceramic network and serve as high-speed conducive path. On the other hand, the strong affinities of LAGP towards SN and anions can significantly improve the conductive behavior and restrict side reactions at electrolyte/Li interface. Under such regulations, the composite electrolyte exhibits high ionic conductivity (0.64 mS cm −1 at 30 °C), high transference number (0.50), and high oxidation potential (>5.0V vs. Li +/Li). The assembled lithium metal batteries demonstrate excellent stability over 300 cycles at 1.0C. This work demonstrates the ion migration mechanism and the interactions at the heterogeneous interface for SN enhanced CSEs, contributing to the development of durable solid lithium metal batteries with extended lifespan.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Interelectrode talk in solid‐state lithium‐metal batteries10.1002/adma.202301892 ↗
2. Are sulfide-based solid-state electrolytes the best pair for Si anodes in Li-ion batteries?
3. Polymer‐based solid‐state electrolytes for high‐energy‐density lithium‐ion batteries – review10.1002/aenm.202301746 ↗
4. Dimensional strategies for bridging the research gap between lab‐scale and potentially practical all‐solid‐state batteries: the role of sulfide solid electrolyte films10.1002/aenm.202301142 ↗
5. Recent progress in constructing halogenated interfaces for highly stable lithium metal anodes10.1016/j.ensm.2022.10.054 ↗
6. Recent advances in conduction mechanisms, synthesis methods, and improvement strategies for Li1+xAlxTi2−x(PO4)3 solid electrolyte for all‐solid‐state lithium batteries
7. Processing and properties of garnet‐type Li7La3Zr2O12 ceramic electrolytes
8. Carbon microstructure dependent Li-ion storage behaviors in SiOx/C anodes10.1002/smll.202370181 ↗
9. Progress and perspectives of lithium aluminum germanium phosphate‐based solid electrolytes for lithium batteries
10. Prospects of LLZO type solid electrolyte: from material design to battery application10.1016/j.cej.2022.140375 ↗
11. Advanced composite solid electrolytes for lithium batteries: filler dimensional design and ion path optimization10.1002/smll.202206355 ↗
12. Hybrid electrolytes for solid-state lithium batteries: challenges, progress, and prospects
13. Practical considerations for enabling Li|polymer electrolyte batteries10.1016/j.joule.2023.06.006 ↗
14. A critical review on composite solid electrolytes for lithium batteries: design strategies and interface engineering10.1016/j.jechem.2023.05.011 ↗
15. Tailoring inorganic–polymer composites for the mass production of solid-state batteries10.1038/s41578-021-00320-0 ↗
16. Solid-state lithium batteries-from fundamental research to industrial progress10.1016/j.pmatsci.2023.101182 ↗
17. Monodispersed sub‐1 nm inorganic cluster chains in polymers for solid electrolytes with enhanced Li‐ion transport10.1002/adma.202303226 ↗
18. Polymer electrolytes shielded by 2D Li0.46MnPS Li+-conductors for all-solid-state lithium-metal batteries10.1016/j.ensm.2023.01.011 ↗
19. Molecular coordination induced high ionic conductivity of composite electrolytes and stable LiF/Li3N interface in long-term cycling all-solid-state lithium metal batteries
20. Surface defects reinforced polymer‐ceramic interfacial anchoring for high‐rate flexible solid‐state batteries10.1002/adfm.202210845 ↗
21. Safe and stable lithium metal batteries enabled by an amide-based electrolyte10.1007/s40820-021-00780-7 ↗
22. Temperature-responsive solvation of deep eutectic electrolyte enabling mesocarbon microbead anode for high-temperature Li-ion batteries10.1021/acsenergylett.3c01079 ↗
23. Facilitating uniform lithium deposition via nanoconfinement of free amide molecules in solid electrolyte complexion for lithium metal batteries10.1016/j.ensm.2022.11.002 ↗
24. Hybrid electrolytes for lithium metal batteries10.1016/j.jpowsour.2018.04.099 ↗
25. Strategies for rational design of polymer-based solid electrolytes for advanced lithium energy storage applications10.1016/j.ensm.2022.08.019 ↗
26. Elastomeric electrolytes for high-energy solid-state lithium batteries10.1038/s41586-021-04209-4 ↗
27. Li‐Ion transfer mechanism of ambient‐temperature solid polymer electrolyte toward lithium metal battery
28. Polyether‐b‐Amide based solid electrolytes with well‐adhered interface and fast kinetics for ultralow temperature solid‐state lithium metal batteries
29. A hybrid solid electrolyte Li0.33La0.557TiO3/poly(acylonitrile) membrane infiltrated with a succinonitrile-based electrolyte for solid state lithium-ion batteries10.1039/C9TA08601C ↗
30. High‐performance dual‐salt plastic crystal electrolyte enabled by succinonitrile‐regulated porous polymer host10.1002/adfm.202213211 ↗
31. Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach10.1016/j.ensm.2019.05.033 ↗
32. Long cycle life all-solid-state batteries enabled by solvent-free approach for sulfide solid electrolyte and cathode films
33. Solvent-free approach for interweaving freestanding and ultrathin inorganic solid electrolyte membranes10.1021/acsenergylett.1c02261 ↗
34. Spontaneous in situ surface alloying of Li-Zn derived from a novel Zn2+ -containing solid polymer electrolyte for steady cycling of Li metal battery10.1021/acssuschemeng.1c00878 ↗
35. Nonflammable nitrile deep eutectic electrolyte enables high-voltage lithium metal batteries10.1021/acs.chemmater.9b05003 ↗
36. Gravity-driven Poly(ethylene glycol)@Li1.5Al0.5Ge1.5(PO4)3 asymmetric solid polymer electrolytes for all-solid-state lithium batteries10.1016/j.jpowsour.2021.230756 ↗
37. Melamine-regulated ceramic/polymer electrolyte interface promotes high stability in lithium-metal battery10.1021/acsami.2c14940 ↗
38. Enhanced ionic conductivity and interface stability of hybrid solid-state polymer electrolyte for rechargeable lithium metal batteries10.1016/j.ensm.2019.05.023 ↗
39. The critical role of fillers in composite polymer electrolytes for lithium battery10.1007/s40820-023-01051-3 ↗
40. Tailoring vertically aligned inorganic‐polymer nanocomposites with abundant lewis acid sites for ultra‐stable solid‐state lithium metal batteries10.1002/aenm.202204218 ↗
41. Filler‐integrated composite polymer electrolyte for solid‐state lithium batteries
42. Surface oxygen vacancy inducing Li‐Ion‐Conducting percolation network in composite solid electrolytes for all‐solid‐state lithium‐metal batteries
43. Janus electrolyte with modified Li+ solvation for high‐performance solid‐state lithium batteries10.1002/adfm.202203336 ↗
44. A competitive solvation of ternary eutectic electrolytes tailoring the electrode/electrolyte interphase for lithium metal batteries10.1021/acsnano.2c05016 ↗
45. Regulating solvation structure in gel polymer electrolytes with covalent organic frameworks for lithium metal batteries10.1016/j.ensm.2022.10.019 ↗
46. PEO based polymer in plastic crystal electrolytes for room temperature high-voltage lithium metal batteries10.1016/j.nanoen.2021.106205 ↗
47. In situ cross‐linked plastic crystal electrolytes for wide‐temperature and high‐energy‐density lithium metal batteries
48. Enhancing Li ion transfer efficacy in PEO-based solid polymer electrolytes to promote cycling stability of Li-metal batteries10.1039/D2TA03283J ↗
49. Li2CO3 : insights into its blocking effect on Li-ion transfer in garnet composite electrolytes10.1021/acsaem.1c03529 ↗
50. Degradation of NASICON-type materials in contact with lithium metal: formation of mixed conducting interphases (MCI) on solid electrolytes10.1021/jp4051275 ↗
51. LiF involved interphase layer enabling thousand cycles of LAGP-based solid-state Li metal batteries with 80% capacity retention10.1016/j.ensm.2022.03.017 ↗
52. Unveiling and alleviating chemical “crosstalk” of succinonitrile molecules in hierarchical electrolyte for high‐voltage solid‐state lithium metal batteries10.1002/eem2.12367 ↗
53. Novel PEO-based composite electrolyte for low-temperature all-solid-state lithium metal batteries enabled by interfacial cation-assistance10.1016/j.ensm.2022.12.048 ↗
54. An H2O‐initiated crosslinking strategy for ultrafine‐nanoclusters‐reinforced high‐toughness polymer‐in‐plasticizer solid electrolyte10.1002/adma.202304712 ↗
55. High ionic conductivity motivated by multiple ion‐transport channels in 2D MOF‐based lithium solid state battery10.1002/adfm.202306060 ↗
56. A surface coordination interphase stabilizes a solid‐state battery10.1002/anie.202108050 ↗
57. Characterization of the structure and chemistry of the solid–electrolyte interface by cryo-EM leads to high-performance solid-state Li-metal batteries10.1038/s41565-022-01148-7 ↗
58. Germanium thin film protected lithium aluminum germanium phosphate for solid‐state Li batteries10.1002/aenm.201702374 ↗
59. Bifunctional in situ polymerized interface for stable LAGP‐based lithium metal batteries10.1002/admi.202100072 ↗
60. Boosting fast interfacial Li+ transport in solid-state Li metal batteries via ultrathin Al buffer layer10.1007/s12274-022-5345-8 ↗