Surface modification of the Li metal anode by alloying, aliphatic, viscoelastic, and Li-M-X ternary systems towards Li dendrite suppression
Source abstract
Abstract
The development of advanced lithium metal batteries (LMBs) holds great promise for the future of energy storage thanks to a much higher theoretical capacity of lithium metal anode than the commonly used graphite. However, one major obstacle in the commercialization of LMBs is the growth of Li dendrites, causing dead lithium, poor cycling performance, and safety hazards from short circuits. This review first focuses on the mechanism of nucleation and growth of the Li dendrites. This review proposes the various morphologies and locations of the dendrites which depend on many experimental parameters such as applied current density, type, and composition of the electrolyte, and the ratio of the storage shear modulus of the electrolyte to the Li-metal modulus. Moreover, the impact of Li-alloy as a safe and dendrite-free anode is investigated. Significant considerations for developing the aliphatic polymers, viscoelastic, and Li-M-X/M-X ternary/binary protective layers are proposed. This work will provide a reference for the rational design of a safe Li metal anode for advanced LMBs in the future.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Xu · 2017
2. Investigation of the lithium-ion depletion in the silicon-silicon carbide anode/electrolyte interface in lithium-ion battery via electrochemical impedance spectroscopy10.1016/j.jelechem.2020.114385 ↗
3. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
4. Chapter 12 - characterization of battery materials by mechanical measurements
5. Electrochemical performance of nitrogen-doped graphene/silicene composite as a pseudocapacitive anode for lithium-ion battery10.1002/slct.202104012 ↗
6. Power and energy performance of porous silicon carbide anode in lithium-metal battery
7. Strategies to anode protection in lithium metal battery: a review10.1002/inf2.12189 ↗
8. Review on Li deposition in working batteries: from nucleation to early growth
9. Unveiling the recent advances in micro-electrode materials and configurations for sodium-ion micro-batteries
10. Stress-driven lithium dendrite growth mechanism and dendrite mitigation by electroplating on soft substrates10.1038/s41560-018-0104-5 ↗
11. Electrochemomechanics of lithium dendrite growth10.1039/C9EE01864F ↗
12. Dendritic growth mechanisms in lithium/polymer cells10.1016/S0378-7753(98)00242-0 ↗
13. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
14. The cycling behavior of the lithium electrode in LiAsF6/methyl acetate solutions10.1016/0013-4686(77)85140-2 ↗
15. Mechanism of the transition from fractal to dendritic growth of surface aggregates10.1038/369469a0 ↗
16. Structure and growth mechanism of mineral dendrites10.1038/353409a0 ↗
17. Recent advances in understanding dendrite growth on alkali metal anodes
18. Plating/stripping behavior of actual lithium metal anode10.1002/aenm.201902254 ↗
19. In situ observation of dendrite behavior of electrode in half and full cells10.1149/2.0921906jes ↗
20. Polymer electrolytes for lithium polymer batteries10.1039/C6TA02621D ↗
21. Polymer electrolytes: ionic transport mechanisms and relaxation coupling10.1557/mrs2000.16 ↗
22. Maranas · 2012 · 1
23. An electrochemical and Raman spectroscopical study of gel polymer electrolytes for lithium batteries10.1016/S0167-2738(97)00489-X ↗
24. Variations on the salt-polymer electrolyte theme for flexible solid electrolytes10.1016/0167-2738(96)00088-4 ↗
25. Effects of nanoscale SiO2 on the thermal and transport properties of solvent-free, poly (ethylene oxide)(PEO)-based polymer electrolytes10.1016/S0167-2738(98)00457-3 ↗
26. Effect of nanosized SiO2 on the transport properties of solventless P (EO) 20LIBETI polymer electrolytes: a solid-state NMR study10.1016/j.ssi.2003.11.009 ↗
27. Effect of nano-silica filler in polymer electrolyte on Li dendrite formation in Li/poly (ethylene oxide)–Li (CF3SO2) 2N/Li10.1016/j.jpowsour.2010.04.027 ↗
28. Mathematical model of the dendritic growth during lithium electrodeposition10.1016/j.jpowsour.2013.01.014 ↗
29. The impact of elastic deformation on deposition kinetics at lithium/polymer interfaces10.1149/1.1850854 ↗
30. Influence of electrolyte modulus on the local current density at a dendrite tip on a lithium metal electrode10.1149/2.0191610jes ↗
31. Controlling dendrite growth in solid-state electrolytes10.1021/acsenergylett.9b02660 ↗
32. Growth of lithium dendrites and globules through a solid block copolymer electrolyte as a function of current density10.1021/acs.jpcc.8b06355 ↗
33. Electrochemical deposition and stripping behavior of lithium metal across a rigid block copolymer electrolyte membrane10.1149/2.0321514jes ↗
34. Current limit diagrams for dendrite formation in solid-state electrolytes for Li-ion batteries10.1016/j.jpowsour.2017.01.037 ↗
35. Inhibit of lithium dendrite growth in solid composite electrolyte by phase-field modeling10.1021/acs.jpcc.0c01116 ↗
36. Two-dimensional silica enhanced solid polymer electrolyte for lithium metal batteries10.1016/j.partic.2023.04.002 ↗
37. Stability of electrodeposition at solid-solid interfaces and implications for metal anodes10.1103/PhysRevLett.119.056003 ↗
38. Flexible garnet solid-state electrolyte membranes enabled by tile-and-grout design10.1021/acsenergylett.9b01847 ↗
39. Elastic properties of the solid electrolyte Li7La3Zr2O12 (LLZO)10.1021/acs.chemmater.5b03854 ↗
40. Elastic properties of grain boundaries in copper and their relationship to bulk elastic constants10.1103/PhysRevB.40.9479 ↗
41. Grain boundary softening: a potential mechanism for lithium metal penetration through stiff solid electrolytes10.1021/acsami.8b17223 ↗
42. Role of hybrid solid state interface as a scavenger for anomalous Li dendrites in the lithium metal battery10.1016/j.est.2024.113360 ↗
43. Mechanisms of dendritic growth investigated by in situ light microscopy during electrodeposition and dissolution of lithium10.1016/j.jpowsour.2014.03.029 ↗
44. Transition of lithium growth mechanisms in liquid electrolytes10.1039/C6EE01674J ↗
45. Transparent cubic garnet-type solid electrolyte of Al2O3-doped Li7La3Zr2O1210.1016/j.ssi.2015.06.009 ↗
46. Mechanism of lithium metal penetration through inorganic solid electrolytes10.1002/aenm.201701003 ↗
47. Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes10.1038/nmat3793 ↗
48. Live scanning electron microscope observations of dendritic growth in lithium/polymer cells10.1149/1.1519970 ↗
49. Intergranular Li metal propagation through polycrystalline Li6.25Al0.25La3Zr2O12 ceramic electrolyte10.1016/j.electacta.2016.12.018 ↗
50. In situ study of dendritic growth inlithium/PEO-salt/lithium cells10.1016/S0013-4686(97)10055-X ↗
51. Comparison of the growth of lithium filaments and dendrites under different conditions10.1016/j.elecom.2014.11.002 ↗
52. Interface engineering of inorganic solid-state electrolytes for high-performance lithium metal batteries10.1039/D0EE01435D ↗
53. Factors that control the formation of dendrites and other morphologies on lithium metal anodes10.3389/fenrg.2019.00115 ↗
54. Super ionic Li3-2xMx(OH)1-yNyCl (M=Ca, W, N=F) halide hydroxide as an anti-perovskite electrolyte for solid-state batteries
55. High-performance PVDF-HFP based gel polymer electrolyte with a safe solvent in Li metal polymer battery10.1016/j.jechem.2020.01.019 ↗
56. Functional lithiophilic skeleton/evolving lithium sulfide artificial protective layer for dendrite-free Li metal anode10.1016/j.cej.2023.147821 ↗
57. Electrochemical lithiation of tin and tin-based intermetallics and composites10.1016/S0013-4686(99)00191-7 ↗
58. Solid–solution-based metal alloy phase for highly reversible lithium metal anode10.1021/jacs.0c01811 ↗
59. Li-rich Li-Si alloy as a lithium-containing negative electrode material towards high energy lithium-ion batteries10.1038/srep08085 ↗
60. Lithium silicide nanocrystals: synthesis, chemical stability, thermal stability, and carbon encapsulation10.1021/ic501923s ↗
61. A Li-ion oxygen battery with Li-Si alloy anode prepared by a mechanical method10.1016/j.elecom.2017.03.010 ↗
62. Design strategies of Li–Si alloy anode for mitigating chemo‐mechanical degradation in sulfide‐based all‐solid‐state batteries10.1002/advs.202301381 ↗
63. Mechanical rolling formation of interpenetrated lithium metal/lithium tin alloy foil for ultrahigh-rate battery anode10.1038/s41467-020-14550-3 ↗
64. Stable lithium metal anode enabled by lithium metal partial alloying10.1016/j.nanoen.2019.103989 ↗
65. Si and Ge‐based anode materials for Li‐, Na‐, and K‐ion batteries: a perspective from structure to electrochemical mechanism10.1002/smll.201905260 ↗
66. Li reaction pathways in Ge and high-performance Ge nanocomposite anodes for Li-ion batteries10.1016/j.cej.2022.140329 ↗
67. Li-alloy based anode materials for Li secondary batteries10.1039/b919877f ↗
68. In situ formed three-dimensional (3D) lithium–boron (Li–B) alloy as a potential anode for next-generation lithium batteries10.1007/s12598-021-01708-1 ↗
69. Improved cycle stability and high security of Li-B alloy anode for lithium–sulfur battery10.1039/C4TA01709A ↗
70. An artificial Li-Al interphase layer on Li-B alloy for stable lithium-metal anode10.1016/j.electacta.2019.03.009 ↗
71. A Li-ion sulfur full cell with ambient resistant Al-Li alloy anode10.1016/j.ensm.2018.04.003 ↗
72. Electrochemical investigation of the diffusion of lithium in β-LiAl alloy at room temperature10.1007/BF01027501 ↗
73. Anode material options toward 500 Wh kg− 1 lithium–sulfur batteries10.1002/advs.202103910 ↗
74. Diffusion limitation of lithium metal and Li–Mg alloy anodes on LLZO type solid electrolytes as a function of temperature and pressure10.1002/aenm.201902568 ↗
75. Lithium–magnesium alloy as a stable anode for lithium–sulfur battery10.1002/adfm.201808756 ↗
76. Electrochemical properties of Li–Mg alloy electrodes for lithium batteries10.1016/S0378-7753(00)00521-8 ↗
77. A dual-phase Li–Ca alloy with a patternable and lithiophilic 3D framework for improving lithium anode performance10.1039/C9TA08798B ↗
78. Low-temperature fusion fabrication of Li-Cu alloy anode with in situ formed 3D framework of inert LiCux nanowires for excellent Li storage performance10.1016/j.scib.2020.07.012 ↗
79. Interfacially redistributed charge for robust lithium metal anode10.1016/j.nanoen.2021.106212 ↗
80. Healable lithium alloy anode with ultrahigh capacity10.1021/acs.nanolett.1c00608 ↗
81. High-performance 3D Li-B-C-Al alloy anode and its twofold Li electrostripping and plating mechanism revealed by synchrotron X-ray tomography10.1002/eem2.12387 ↗
82. Ultrathin Li-rich Li-Cu alloy anode capped with lithiophilic LiC6 headspace enabling stable cyclic performance10.1016/j.jcis.2023.03.191 ↗
83. Crystal structure and electrochemical behavior of Li2CuP: a surprising reversible crystalline− amorphous transformation10.1021/cm034619m ↗
84. Preparation of Li4. 4GexSi1− x alloys by mechanical milling process and their properties as anode materials in all-solid-state lithium batteries10.1016/j.ssi.2004.08.022 ↗
85. Construction of the ternary phase diagram for the Li− Cu− Sb system as the anode material for a lithium ion battery10.1021/jp070397u ↗
86. Synthesis, structure transformation, and electrochemical properties of Li2MgSi as a novel anode for Li‐lon batteries10.1002/adfm.201304287 ↗
87. A bifunctional ethylene-vinyl acetate copolymer protective layer for dendrites-free lithium metal anodes10.1016/j.jechem.2020.01.027 ↗
88. Stable Li metal anode by a polyvinyl alcohol protection layer via modifying solid-electrolyte interphase layer10.1016/j.nanoen.2019.103893 ↗
89. Artificial soft–rigid protective layer for dendrite‐free lithium metal anode
90. Heteroatom-rich polymers as a protective film to control lithium growth for high-performance lithium-metal batteries10.1016/j.jpowsour.2021.230949 ↗
91. Lithium metal anodes with an adaptive “solid-liquid” interfacial protective layer10.1021/jacs.6b13314 ↗
92. Dendrite-free lithium anode via a homogenous Li-ion distribution enabled by a Kimwipe paper10.1002/adsu.201600034 ↗
93. Stabilize lithium metal anode through constructing a lithiophilic viscoelastic interface based on hydroxypropyl methyl cellulose10.1016/j.cej.2020.125687 ↗
94. 16 - all-solid-state batteries
95. Influencing factors on Li‐ion conductivity and interfacial stability of solid polymer electrolytes, exampled by polycarbonates, polyoxalates and polymalonates
96. Aliphatic polycarbonate‐based solid‐state polymer electrolytes for advanced lithium batteries: advances and perspective
97. Room-temperature performance of poly (ethylene ether carbonate)-based solid polymer electrolytes for all-solid-state lithium batteries10.1038/s41598-017-17697-0 ↗
98. Ionic transport in solid-state composite poly (trimethylene carbonate)–Li6. 7Al0. 3La3Zr2O12 electrolytes: the interplay between surface chemistry and ceramic particle loading10.1016/j.electacta.2023.142785 ↗
99. Development of polycarbonate-based electrolytes with in situ polymerized electrolyte interlayers for lithium-metal batteries10.1016/j.est.2023.110175 ↗
100. A novel asymmetrical multilayered composite electrolyte for high-performance ambient-temperature all-solid-state lithium batteries