journal article·2024-12

In-situ formation of spinel protective layer through extremely low K-doping for enhanced performance of Ni-rich layered cathodes

Wei-Hsiang Chen, Yu-Ting Weng, Yu-Cheng Lu, Hsi Chen, Po-Ya Chang, Hwo-Shuenn Sheu, Senthil-Kumar Parthasarathi, Nae-Lih Wu

Publisher page

Abstract

Herein, we demonstrate a novel and feasible strategy to stabilize the LiNi 0.83Co 0.12Mn 0.05O 2 (NCM) structure via the in-situ formation of a superficial spinel layer with potassium (K) doping. While K + doped NCM is not new, the formation of the protective spinel layer gives surprising results with even a trace amount of doping, which is unique and novel, and nowhere reported. The structural transformation from layered to spinel on the surface region of NCM is achieved with a K-doping level of 0.05 mol% (NCM-0.05K) and the formed spinel layer acted as a protective pillar for stabilizing the host structure, leading to substantially improved electrochemical performance. The X-ray photoelectron spectra demonstrate a large increase in nickel (Ni 2+) distribution after cycling for pristine but almost no change for the NCM-0.05K, suggesting a stable preformed spinel layer. The above results reveal that the K + doping can strongly reduce the Ni 4+ to stable Ni 2+ under the spinel phase formation and improves cell performances in terms of specific capacity, capacity retention, rate capability, and Li + diffusivity. The internal micro-cracking of host NCM is also effectively suppressed by the low amount of K doping. Excessive K-doping, in contrast, leads to a reduction in (de)lithiation rate and greater polarization.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
2. A review of Ni-based layered oxides for rechargeable Li-ion batteries10.1039/C6TA07991A ↗
3. Optimized temperature effect of Li-ion diffusion with layer distance in Li(NixMnyCoz)O2 cathode materials for high performance Li-ion battery10.1002/aenm.201501309 ↗
4. Nano-TiO2 coated single-crystal LiNi0.65Co0.15Mn0.2O2 for lithium-ion batteries with a stable structure and excellent cycling performance at a high cut-off voltage10.1039/D2TA00135G ↗
5. Systematic optimization of battery materials: key parameter optimization for the scalable synthesis of uniform, high-Energy, and high stability LiNi0.6Mn0.2Co0.2O2 cathode material for lithium-ion batteries10.1021/acsami.7b10155 ↗
6. Direct observation of the partial formation of a framework structure for Li-rich layered cathode material Li[Ni0.17Li0.2Co0.07Mn0.56]O2 upon the first charge and discharge10.1016/j.jpowsour.2010.12.079 ↗
7. Electrochemical performance of Li[LixNi(1-3x)/2Mn(1+x)/2]O2 cathode materials synthesized by a sol–gel method10.1016/S0378-7753(03)00172-1 ↗
8. Synthesis-structure-property relations in layered, Li-excess oxides electrode materials Li[Li[1/3-2x/3]NixMn[2/3-x/3]]O2 (x = 1/3, 1/4, and 1/5)10.1149/1.3473830 ↗
9. Degradation analysis of a Ni-based layered positive-electrode active material cycled at elevated temperatures studied by scanning transmission electron microscopy and electron energy-loss spectroscopy10.1016/j.jpowsour.2011.05.017 ↗
10. High voltage driven surface structuring and electrochemical stabilization of Ni-rich layered cathode materials for Li rechargeable batteries10.1002/aenm.202000521 ↗
11. A review on doping/coating of nickel-rich cathode materials for lithium-ion batteries10.1016/j.jallcom.2019.153048 ↗
12. Layered Li1+x(Ni0.33Co0.33Mn0.33)O2 cathode material prepared by microwave assisted solvothermal method for lithium ion batteries10.1016/j.materresbull.2017.05.035 ↗
13. Synthesis of micron-sized LiNi0.8Co0.1Mn0.1O2 and its application in bimodal distributed high energy density Li-ion battery cathodes10.3390/en15218129 ↗
14. Structural study of the coating effect on the thermal stability of charged MgO-coated LiNi0.8Co0.2O2 cathodes investigated by in situ XRD10.1016/j.jpowsour.2012.05.028 ↗
15. Annealing effects of TiO2 coating on cycling performance of Ni-rich cathode material LiNi0.8Co0.1Mn0.1O2 for lithium-ion battery10.1016/j.matlet.2020.127418 ↗
16. Role of alumina coating on Li-Ni-Co-Mn-O particles as positive electrode material for lithium-ion batteries10.1021/cm050566s ↗
17. Nitrogen-doped carbon supported ZnO as highly stable heterogeneous catalysts for transesterification synthesis of ethyl methyl carbonate10.1016/j.jcis.2020.07.095 ↗
18. Surface-coated LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode materials by Al2O3, ZrO2, and Li2O-2B2O3 thin-layers for improving the performance of lithium ion batteries10.3389/fmats.2019.00309 ↗
19. High-performance lithium ion batteries using SiO2-coated LiNi0.5Co0.2Mn0.3O2 microspheres as cathodes10.1016/j.jallcom.2017.03.225 ↗
20. Heuristic solution for achieving long-term cycle stability for Ni-rich layered cathodes at full depth of discharge10.1038/s41560-020-00693-6 ↗
21. Structural, electrochemical and Li- ion transport properties of Zr-modified LiNi0.8Co0.1Mn0.1O2 positive electrode materials for Li-Ion Batteries10.1016/j.jpowsour.2018.10.094 ↗
22. Tungsten doping for stabilization of Li[Ni0.90Co0.05Mn0.05]O2 cathode for Li-ion battery at high voltage10.1016/j.jpowsour.2019.227242 ↗
23. Enhanced high-rate capability and cycling stability of Na-stabilized layered Li1.2[Co0.13Ni0.13Mn0.54]O2 cathode material10.1039/c3ta12296d ↗
24. Investigation on the effect of Na doping on structure and Li-ion kinetics of layered LiNi0.6Co0.2Mn0.2O2 cathode material10.1016/j.electacta.2016.01.139 ↗
25. Understanding the role of Na-doping on Ni-rich layered oxide LiNi0.5Co0.2Mn0.3O210.1016/j.jallcom.2016.07.230 ↗
26. K+-doped Li1.2Mn0.54Co0.13Ni0.13O2: a novel cathode material with an enhanced cycling stability for lithium-ion batteries10.1021/am5017649 ↗
27. Host structural stabilization of Li1.232Mn0.615Ni0.154O2 through K-doping attempt: toward superior electrochemical performances10.1016/j.electacta.2015.12.021 ↗
28. Improved rate and cyclic performance of potassium doped nickel rich ternary cathode material for lithium ion batteries10.1007/s10853-020-05306-x ↗
29. The effects of alkali metal ions with different ionic radii substituting in Li sites on the electrochemical properties of Ni-rich cathode materials10.1016/j.jpowsour.2019.227195 ↗
30. Synergistically enhanced electrochemical performance of Ni-rich cathode materials for lithium-ion batteries by K and Ti co-modification10.1021/acs.jpcc.9b10526 ↗
31. Dual modification of LiNi0.83Co0.11Mn0.0.06O2 cathode materials by K+ doping and Li3PO4 coating for lithium ions batteries10.1007/s12598-024-02692-y ↗
32. Structural and chemical evolution of Li- and Mn-rich layered cathode material10.1021/cm5045978 ↗
33. Superior stability secured by a four-phase cathode electrolyte interface on a Ni-rich cathode for lithium ion batteries10.1021/acsami.9b12578 ↗
34. Enhancement on the cycling stability of the layered Ni-rich oxide cathode by in-situ fabricating nano-thickness cation-mixing layers10.1149/2.0841613jes ↗
35. A new type of protective surface layer for high-capacity Ni-based cathode materials: nanoscaled surface pillaring layer10.1021/nl304558t ↗
36. In-situ inducing spinel/rock salt phases to stabilize Ni-rich cathode via sucrose heat treatment10.34133/energymatadv.0034 ↗
37. Yttrium modified Ni-rich LiNi0.8Co0.1Mn0.1O2 with enhanced electrochemical performance as high energy density cathode material at 4.5 V high voltage10.1016/j.jallcom.2018.09.281 ↗
38. Influence of Mo addition on the structural and electrochemical performance of Ni-rich cathode material for lithium-ion batteries10.1038/s41598-020-64546-8 ↗
39. Minimization of the cation mixing in Li1+x(NMC)1−xO2 as cathode material10.1016/j.jpowsour.2009.09.029 ↗
40. The solid-state chelation synthesis of LiNi1/3Co1/3Mn1/3O2 as a cathode material for lithium-ion batteries10.1039/C5TA01236H ↗
41. Effect of Ni2þ content on lithium/nickel disorder for Ni-rich cathode materials10.1021/acsami.5b00645 ↗
42. Ag-Sn dual-modified LiNi0.8Co0.1Mn0.1O2 as cathode for lithium storage10.1016/j.jallcom.2020.156763 ↗
43. Direct quantification of anionic redox over long cycling of Li-rich NMC via hard X-ray photoemission spectroscopy10.1021/acsenergylett.8b01798 ↗
44. K-doped layered LiNi0.5Co0.2Mn0.3O2 cathode material: towards the superior rate capability and cycling performance10.1016/j.jallcom.2016.11.245 ↗
45. Challenges and modification strategies of Ni-rich cathode materials operating at high-voltage10.3390/nano12111888 ↗
46. High voltage spinel cathode materials for high energy density and high rate capability Li ion rechargeable batteries10.1016/j.jpowsour.2009.05.017 ↗
47. Surface spinel reconstruction to suppress detrimental phase transition for stable LiNi0.8Co0.1Mn0.1O2 cathodes10.1007/s12274-022-4754-z ↗
48. Polyvinylpyrrolidone induced uniform surface-conductive polymer coating endows Ni-rich LiNi0.8Co0.1Mn0.1O2 with enhanced cyclability for lithium-ion batteries10.1021/acsami.9b04050 ↗
49. Enhanced catalytic conversion of polysulfides using high-percentage 1T-phase metallic WS2 nanosheets for Li–S batteries10.1016/j.gee.2021.03.001 ↗
50. A comparative study of polycrystal/single-crystal LiNi0.8Co0.1Mn0.1O2 in all-solid-state Li-ion batteries with halide-based electrolyte under low stacking pressure10.1002/ente.202370041 ↗
51. AC impedance analysis of polycrystalline insertion electrodes: application to Li1-xCoO210.1149/1.2114158 ↗
52. Investigation of layered LiNi1/3Co1/3Mn1/3O2 cathode of lithium ion battery by electrochemical impedance spectroscopy10.1016/j.jelechem.2012.09.027 ↗
53. An ac impedance spectroscopic study of Mg-doped LiCoO2 at different temperatures: electronic and ionic transport properties10.1016/j.electacta.2004.10.044 ↗
54. An electrochemical AC impedance study of LixNi0.75Co0.25O2 intercalation electrode10.1016/S0378-7753(00)00592-9 ↗
55. An AC impedance spectroscopic study of LixCoO2 at different temperatures10.1021/jp013569a ↗
56. Enhanced cycling stability of single-crystal LiNi0.83Co0.07Mn0.1O2 by Li-reactive coating with H3BO310.1007/s12598-022-02213-9 ↗
57. Understanding the effects of a multifunctionalized additive on the cathode-electrolyte interfacial stability of Ni-rich materials10.1016/j.jpowsour.2015.10.051 ↗
58. Nanoscale coating of LiMO2 (M = Ni, Co, Mn) nanobelts with Li+-conductive Li2TiO3: toward better rate capabilities for Li-ion batteries10.1021/ja308717z ↗
59. In-situ formation of a LiBO2 coating layer and spinel phase for Ni-rich cathode materials from a boric acid-etched precursor10.1021/acsami.3c14342 ↗