Operando pressure measurements monitor the degradation of SiOx/C anode for Li-ion cells
Source abstract
Abstract
Monitoring on the degradation of the capacity is important to ensure the normal operation of the Li-ion cells. Herein, operando pressure measurement, an in-situ and real-time non-destructive method, is developed to monitor the degradation of SiO x /C anode. Combined with the potentials of the anode and cathode, the relationship between the cell pressure change and the internal reaction in cell is firstly established. Furthermore, the differential pressure (dP/dQ) possesses the ability to quantitatively distinguish the capacity of SiO x from total capacity, due to difference in volume change between SiO x and C during discharge. And then this powerful operando pressure method is used in the cells with two different binders, Carboxy Methyl Cellulose + Polymerized Styrene Butadiene Rubber (CMC + SBR) and Poly(Acrylic Acid)-based (PAA-based) binder, respectively. Based on the monitoring of the pressure and dP/dQ, the contribution and degradation of SiO x and C are clearly known in the cases of two binders, i.e., the capacity degradation of SiO x is only 1.7% for PAA-based binder after 500 cycles while 9.58% for CMC + SBR. Operando pressure method paves the wave for the in-situ and in real time monitoring the silicon-contained Li-ion cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Chemomechanics of rechargeable batteries: status, theories, and perspectives10.1021/acs.chemrev.2c00002 ↗
2. Volume, pressure and thickness evolution of Li-Ion pouch cells with silicon-composite negative electrodes10.1149/2.1691712jes ↗
3. Volume and thickness change of NMC811|SiOx-graphite large-format lithium-ion cells: from pouch cell to active material level10.1016/j.jpowsour.2022.231443 ↗
4. Suppressed volume variation of optimized SiOx/C anodes with PAA-based binders for advanced Lithium-ion pouch cells10.1016/j.ssi.2019.115070 ↗
5. A toolbox of reference electrodes for Lithium batteries
6. Operando quantification of (de)lithiation behavior of silicon–graphite blended electrodes for Lithium-Ion batteries10.1002/aenm.201803380 ↗
7. Study of the binder influence on expansion/contraction behavior of silicon alloy negative electrodes for Lithium-Ion batteries10.1149/1945-7111/abcf4f ↗
8. Unlocking cell chemistry evolution with operando fibre optic infrared spectroscopy in commercial Na(Li)-ion batteries10.1038/s41560-022-01141-3 ↗
9. Future smart battery and management: advanced sensing from external to embedded multi-dimensional measurement10.1016/j.jpowsour.2021.229462 ↗
10. Mechanical behavior of Silicon-Graphite pouch cells under external compressive load: implications and opportunities for battery pack design10.1016/j.jpowsour.2020.227774 ↗
11. Operando pressure measurements reveal solid electrolyte interphase growth to rank Li-Ion cell performance10.1016/j.joule.2018.12.009 ↗
12. Onboard early detection and mitigation of lithium plating in fast-charging batteries10.1038/s41467-022-33486-4 ↗
13. Battery capacity fading estimation using a force-based incremental capacity analysis10.1149/2.0511608jes ↗
14. Interface-adaptive binder enabled by supramolecular interactions for high-capacity Si/C composite anodes in lithium-ion batteries10.1002/adfm.202111560 ↗
15. Natural sesbania gum as an efficient biopolymer binder for high-performance Si-based anodes in lithium-ion batteries10.1016/j.jpowsour.2022.231604 ↗
16. Carbon microstructure dependent Li-ion storage behaviors in SiOx/C anodes10.1002/smll.202370181 ↗
17. Quantification and modeling of mechanical degradation in Lithium-ion batteries based on nanoscale imaging10.1038/s41467-018-04477-1 ↗
18. Machine-learning-revealed statistics of the particle-carbon/binder detachment in Lithium-ion battery cathodes10.1038/s41467-020-16233-5 ↗
19. Suppressing vertical displacement of lithiated silicon particles in high volumetric capacity battery electrodes10.1002/celc.201500133 ↗
20. Phase evolution and intermittent disorder in electrochemically lithiated graphite determined using in operando neutron diffraction10.1021/acs.chemmater.9b05145 ↗
21. Experimental characterization of lithium-ion cell strain using laser sensors10.3390/en14196281 ↗
22. Collapse of LiNi1- x- yCoxMnyO2 lattice at deep charge irrespective of nickel content in Lithium-Ion batteries10.1021/jacs.8b13798 ↗
23. A new method for quantitative phase analysis using X-ray powder diffraction: direct derivation of weight fractions from observed integrated intensities and chemical compositions of individual phases10.1107/S1600576716010451 ↗
24. Comparison of expansion and voltage differential indicators for battery capacity fade10.1016/j.jpowsour.2021.230714 ↗
25. Differential expansion and voltage model for Li-ion batteries at practical charging rates10.1149/1945-7111/aba5d1 ↗
26. Mechanical impedance as a tool for electromechanical investigation and equivalent modeling of lithium-ion batteries10.1016/j.jpowsour.2021.230337 ↗
27. Study of the influence of mechanical pressure on the performance and aging of Lithium-ion battery cells10.1016/j.jpowsour.2019.227148 ↗
28. Understanding the dilation and dilation relaxation behavior of graphite-based lithium-ion cells10.1016/j.jpowsour.2016.03.078 ↗
29. Understanding of pre-lithiation of poly(acrylic acid) binder: striking the balances between the cycling performance and slurry stability for silicon-graphite composite electrodes in Li-ion batteries10.1016/j.jpowsour.2019.01.068 ↗
30. Analysis on the effect of external press force on the performance of LiNi0.8Co0.1Mn0.1O2/Graphite large pouch cells10.1016/j.est.2021.103425 ↗
31. Experimental degradation study of a commercial lithium-ion battery10.1016/j.jpowsour.2022.232498 ↗