3D modeling and simulation of an alkaline flow battery considering the tertiary current distribution on the electrodes: Anthraquinone-ferro/ferricyanide as organic electroactive species
Source abstract
Abstract
A 3D-mathematical model in steady-state for an alkaline organic redox flow battery with an interdigitated channel is proposed based on the Nernst-Planck and Butler-Volmer theories, as well as the tertiary current distribution model. One of the main objectives of this study is considers the role of the inlet and outlet manifolds on the AORFB performance. The simulation results show a good prediction of the experimental polarization curves at different SOCs (10%, 50% and ∼100%) using the 2,6-dihydroanthraquinone/ferrocyanide redox couple at laboratory scale cell. Specifically, at a state of charge of 10% and cell voltage of 1.2 V, the model described adequately the relationship between ion concentration and cell overpotential due to considers the resistances to mass transfer at the electrode-electrolyte interface by means of the mass transfer coefficient model. In present work, it is show that the inlet manifold (dividing type) causes an electrolyte flow maldistribution along the channels and from channel to channel, provoking local zones whit greater shear stress and pressure drop, as well as zones with high concentration, and as consequence zones with high current densities and potential drops, which could lead to a more rapid deterioration of the cell components decreasing the useful life of the AORFB or that the charge-discharge efficiency cycles decrease over time of operation. These results cannot be observed in 2D simulations using a small repeating unit or unit cell.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Electrocatalysts for Energy Conversion · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. 2021
2. Towards eco-friendly redox flow batteries with all bio-sourced cell components10.1016/j.est.2022.104352 ↗
3. Progress and directions in low-cost redox-flow batteries for large-scale energy storage10.1093/nsr/nww098 ↗
4. Modeling of Zinc Bromine Redox flow battery with application to channel design
5. A comparative study of all-vanadium redox flow batteries for large-scale energy storage
6. Review of development of first-generation redox flow batteries: iron-chromium system10.1002/cssc.202101798 ↗
7. Redox flow batteries: status and perspective towards sustainable stationary energy storage
8. Organic electroactive molecule-bases electrolytes for redox flow batteries: status and challenges of molecular design10.3389/fchem.2020.00451 ↗
9. Unraveling pH depend cycling of ferricianyde/ferrocyanide in redox flow batteries10.1016/j.nanoen.2017.10.057 ↗
10. Alkaline aqueous organic redox flow batteries of high energy and power densities using mixed naphthoquinone derivatives10.1016/j.cej.2019.123985 ↗
11. Alkaline quinone flow battery10.1126/science.aab3033 ↗
12. Modeling of ion crossover in vanadium redox flow batteries: a computationally-efficient lumped parameter approach for extended cycling10.1149/2.0311601jes ↗
13. Dynamic modelling of the effects of ion diffusion and side reactions on the capacity loss for vanadium redox flow battery10.1016/j.jpowsour.2011.09.003 ↗
14. A transient vanadium flow battery model incorporating vanadium crossover and water transport through membrane10.1149/2.017209jes ↗
15. Numerical Analysis of cycling performance of vanadium redox flow battery
16. A numerical study of electrode thickness and porosity effects in all vanadium redox flow batteries10.1016/j.est.2020.101208 ↗
17. CFD modeling of residence time distribution and experimental validation in a redox flow battery using free a porous flow10.1016/j.est.2020.101337 ↗
18. Mathematic modeling and performance analysis of vanadium redox flow battery10.1021/acs.energyfuels.0c01536 ↗
19. Numerical Examination of the performance of a vanadium redox flow battery under variable operating strategies10.1016/j.jpowsour.2020.228002 ↗
20. Modeling and simulation of vanadium redox flow battery with interdigitated flow field for optimizing electrode architecture10.1149/1945-7111/ab6dd0 ↗
21. Visualized cell characteristics by a two-dimensional model of vanadium redox flow battery with interdigitated channel and thin active electrode10.1016/j.electacta.2019.04.055 ↗
22. Numerical investigations of effects of the interdigitated channel spacing on overall performance of vanadium redox flow batteries10.1016/j.est.2020.101781 ↗
23. Mathematical modeling and numerical analysis of alkaline zinc-iron flow batteries for energy storage applications10.1016/j.cej.2020.126684 ↗
24. Toward a low-cost alkaline zinc-iron flow battery with a polybenzimidazole custom membrane for stationary energy storage10.1016/j.isci.2018.04.006 ↗
25. Understanding the role of the porous electrode microstructure in redox flow battery performance using an experimentally validated 3D pore-scale lattice Boltzmann model10.1016/j.jpowsour.2019.227249 ↗
26. Modeling and Simulation study of a metal free organic-inorganic aqueous flow battery with flow through electrode10.1016/j.electacta.2015.04.075 ↗
27. Fast computing flow battery modeling to optimize the choice of electrolytes and operating conditions – application to aqueous organic electrolytes10.1016/j.electacta.2021.138961 ↗
28. Analysis of electrode configurations effects on mass transfer and organic redox flow battery performance10.1021/acs.iecr.1c04689 ↗
29. A bifurcate interdigitated flow field with high performance but significantly reduced pumping work for scale-up of redox flow batteries10.1016/j.jpowsour.2023.232757 ↗
30. Numerical investigations of flow designs for vanadium redox flow batteries10.1016/j.apenergy.2012.12.041 ↗
31. Vanadium redox flow batteries: flow field design and flow rate optimization10.1016/j.est.2021.103526 ↗
32. Analysis of flow field design on vanadium redox flow battery performance: development of 3D computational fluid dynamic model and experimental validation10.1016/j.apenergy.2018.06.148 ↗
33. Supplementary materials for alkaline quinone flow battery10.1126/science.aab3033 ↗
34. Critical transport issues for improving the performance of aqueous redox flow batteries
35. Quantifying mass transfer rates in redox flow batteries10.1149/2.0201711jes ↗
36. Numerical investigations of effects of the interdigitated channel spacing on overall performance of vanadium redox flow batteries10.1016/j.est.2020.101781 ↗
37. Dihllon · 2021
38. Diffusion of Ions in sea water in deep-sea sediments10.1016/0016-7037(74)90145-8 ↗
39. Extending the lifetime of organic flow batteries via redox state management10.1021/jacs.8b13295 ↗
40. Flow uneven-distribution and its impact on performances of forward osmosis module10.1016/j.jwpe.2019.101014 ↗
41. Manifold design for micro-channel cooling with uniform flow distribution
42. Modelling of flow distribution within spacer-filled channels fed by dividing manifolds as found in stacks for membrane-based technologies10.1016/j.cej.2021.130232 ↗