Kinetic insights into LixNi0.67N (1.67 ≤ x ≤ 2.17), a quasi “zero-strain” negative electrode material for Li-ion battery
Source abstract
Abstract
The kinetics of the electrochemical lithium intercalation in the nitridonickelate Li x Ni 0.67 N (1.67 ≤ x ≤ 2.17) is investigated by electrochemical impedance spectroscopy during a full reduction-oxidation cycle in a two-electrode cell. The layered structure of this anode material delivers a reversible and stable specific capacity of 200 mAh g-1 over 100 cycles at C/10 near 0.5 V vs Li + /Li. The equivalent electric circuit simulation allows a full assignment of the impedance spectra, with different contributions including the SEI layers on each electrode, charge transfer and Li diffusion. The calculated lithium diffusion coefficient value of approximately 5×10 −9 cm 2 s −1 almost does not vary with the lithium content in Li x Ni 0.67 N (1.67 ≤ x ≤ 2.17). Conversely, the charge transfer resistance (R ct) is found to strongly depend on the depth of reduction to be maximum for the fully reduced electrode, with a totally reversible behavior during oxidation. The overall impedance of the cell remains stable upon long cycling, which indicates a good chemical stability of the SEI on Li x Ni 0.67 N as well as 2 remarkable structural and chemical stability of the nitridonickelate upon cycles. The present kinetic findings shed light on the remarkable "zero-strain" behavior of this negative electrode material presenting numerous Li vacancies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Review of selected electrode-solution interactions which determine the performance of Li and Li ion batteries10.1016/S0378-7753(00)00431-6 ↗
2. Li plating as unwanted side reaction in commercial Li-ion cells – a review10.1016/j.jpowsour.2018.02.063 ↗
3. Zero‐strain insertion material of Li[Li1/3Ti5/3]O4 for rechargeable lithium cells10.1149/1.2048592 ↗
4. Review on recent progress of nanostructured anode materials for Li-ion batteries10.1016/j.jpowsour.2013.11.103 ↗
5. Metal oxides and oxysalts as anode materials for Li ion batteries10.1021/cr3001884 ↗
6. Li deintercalation-intercalation reaction and structural change in lithium transition metal nitride, Li7MnN410.1149/1.2059266 ↗
7. High rate performance of lithium manganese nitride and oxynitride as negative electrodes in lithium batteries10.1016/j.elecom.2009.12.027 ↗
8. Ball-milled Li7MnN4: an attractive negative electrode material for lithium-ion batteries10.1016/j.electacta.2013.03.012 ↗
9. Synthesis and electrochemical studies of a new anode material, Li3-xCoxN10.1016/0167-2738(95)00221-9 ↗
10. Electrochemical studies of a new anode material, Li3-xMxN (M=Co, Ni, Cu)10.1016/S0378-7753(96)02557-8 ↗
11. Study of Li3-xMxN (M: Co, Ni or Cu) system for use as anode material in lithium rechargeable cells10.1016/0167-2738(96)00174-9 ↗
12. Anode performance of a new layered nitride Li3-xCoxN (x = 0.2-0.6)10.1016/S0378-7753(97)02597-4 ↗
13. A novel lithium intercalation compound based on the layered structure of lithium nitridonickelates Li3-2xNixN10.1016/j.electacta.2007.05.037 ↗
14. Layered lithium cobalt nitrides: a new class of lithium intercalation compounds10.1016/j.jpowsour.2007.09.052 ↗
15. Reaction mechanisms of Li2.6Co0.4N anode material10.1016/S0167-2738(99)00038-7 ↗
16. Novel composite anodes based on nano-oxides and Li2.6Co0.4N for lithium ion batteries10.1016/S0013-4686(01)00474-1 ↗
17. Solid polymer electrolyte cells using SnSb/Li2.6Co0.4N composite anodes10.1016/S0378-7753(01)00607-3 ↗
18. Novel composite anodes based on layered lithium transition metal nitrides for lithium secondary batteries10.1016/j.ssi.2004.03.013 ↗
19. Hard carbon/Li2.6Co0.4N composite anode materials for Li-ion batteries10.1016/j.ssi.2006.06.029 ↗
20. Comparison of the electrochemical properties of metallic layered nitrides containing cobalt, nickel and copper in the 1 V-0.02 V potential range10.1016/j.elecom.2007.07.022 ↗
21. Li2.0Ni0.67N, a promising negative electrode material for Li-ion batteries with a soft structural response10.1021/acs.inorgchem.7b01903 ↗
22. Chemical stability of layered lithium cobalt nitrides in air10.1016/j.corsci.2012.01.032 ↗
23. Investigation of the chemical stability of Li7MnN4 in air10.1016/j.corsci.2013.07.027 ↗
24. Larson · 2000 · 231
25. EXPGUI , a graphical user interface for GSAS10.1107/S0021889801002242 ↗
26. The influence of polytetrafluorethylene reduction on the capacity loss of the carbon anode for lithium ion batteries10.1016/S0167-2738(96)00367-0 ↗
27. Electrochemical carbon10.1021/cr960003n ↗
28. Direct solid-state synthesis and large-capacity anode operation of Li3-xFexN10.1039/c0jm03735d ↗
29. In-situ carbon coating to enhance the rate capability of the Li4Ti5O12 anode material and suppress the electrolyte reduction decomposition on the electrode10.1016/j.electacta.2015.12.176 ↗
30. Enhanced electrochemical performance of a LTO/N-doped graphene composite as an anode material for Li-ion batteries10.1016/j.ssi.2017.09.017 ↗
31. High performance of salt-modified–LTO anode in LiEePO4 battery10.3390/app10207135 ↗
32. Impedance spectroscopy of lithium and nickel electrodes in propylene carbonate solutions of different lithium salts A comparative study10.1016/0378-7753(94)02086-I ↗
33. Application of A‐C techniques to the study of lithium diffusion in tungsten trioxide thin films10.1149/1.2129668 ↗
34. A kinetic study of electrochemical lithium insertion in Li7MnN4 by impedance spectroscopy10.1016/j.jallcom.2015.12.121 ↗
35. An electrochemical investigation into the lithium insertion properties of LixNiO2 (0 ≤ x ≤ 1)10.1016/0167-2738(96)00262-7 ↗
36. A study of the electrochemical lithium intercalation behavior of porous LiNiO2 electrodes prepared by solid-state reaction and sol-gel methods10.1016/S0378-7753(97)02677-3 ↗
37. Li diffusion in LiCoO2 thin films prepared by pulsed laser deposition10.1016/j.jpowsour.2005.12.012 ↗
38. Orientation dependence of Li-ion diffusion kinetics in LiCoO2 thin films prepared by RF magnetron sputtering10.1016/j.ssi.2008.02.051 ↗
39. High rate capability of Li(Ni1/3Mn1/3Co1/3)O2 electrode for Li-ion batteries10.1149/2.062204jes ↗
40. Impedance studies of Li+ diffusion in nickel manganese cobalt oxide (NMC) during charge/discharge cycles10.1016/j.jelechem.2020.113944 ↗
41. Determination of activation energy for Li ion diffusion in electrodes10.1021/jp8099576 ↗