Systematic and predictive trends to chromium poisoning in solid oxide fuel cell cathodes
Source abstract
Abstract
High performance computing simulations of Cr-poisoning are used to develop systematic trends for overpotential driven degradation modes in microstructurally resolved fuel cell cathodes. Oxygen reduction and chromium oxide deposition at triple phase boundaries (tpbs), and species transport, are numerically computed within 19 microstructures (103 µm3 domains) over a range of operating conditions. Three primary input parameters drive degradation: tpb density of the microstructure ρtpb, normalized charge-transfer current density for Cr-poisoning i∗, and galvanostatic current density j. Simulations converged over large fractions of the potential operating time, ranging from thousands to over a hundred thousand hours. For all simulations, normalized overpotential η∗ versus time t curves can be modeled using a progressive, asymptotic function η∗=ma(ta−t) with two fitting parameters: the initial slope m and the asymptote a. A third output parameter tl was defined as the time when a specific fraction of overpotential range was lost. Several methods to determine each output parameter are presented. More importantly, using the large amount of data generated from over 95 time-dependent simulation series (over 29,000 individual simulations), simple correlations are made between the input and output parameters that provide predictive capability of operational lifetime tl (and m and a), without needing further high-performance computing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. Singhal · 2003 · 405
2. Solid oxide fuel cell technology - Features and applications10.1016/j.ssi.2004.07.042 ↗
3. O’Hayre · 2016 · 580
4. Meeting U.S. solid oxide fuel cell targets10.1016/j.joule.2019.07.018 ↗
5. Hydrogen and Fuel Cell Technologies Office · 2023
6. A review on solid oxide fuel cell durability: Latest progress, mechanisms, and study tools10.1016/j.rser.2022.112339 ↗
7. Development and demonstration of a novel reversible SOFC system for utility and micro grid energy storage10.1002/fuce.201600185 ↗
8. Materials for reversible solid oxide cells10.1016/j.coelec.2020.03.014 ↗
9. High-temperature seals for solid oxide fuel cells (SOFC)10.1361/105994906X117224 ↗
10. Fundamental mechanisms limiting solid oxide fuel cell durability10.1016/j.jpowsour.2008.02.016 ↗
11. Tailoring SOFC electrode microstructures for improved performance10.1002/aenm.201800120 ↗
12. A review on cell/stack designs for high performance solid oxide fuel cells10.1016/j.rser.2015.12.034 ↗
13. Investigations of metallic alloys for use as interconnects in solid oxide fuel cell stacks10.1007/BF00355908 ↗
14. Metallic interconnects for solid oxide fuel cells10.1016/j.msea.2005.02.047 ↗
15. Thermodynamic considerations on Cr poisoning in SOFC cathodes10.1016/j.ssi.2006.07.055 ↗
16. Metallic interconnects for SOFC: Characterisation of corrosion resistance and conductivity evaluation at operating temperature of differently coated alloys10.1016/j.jpowsour.2007.06.255 ↗
17. Chromium vapor species over solid oxide fuel cell interconnect materials and their potential for degradation processes10.1149/1.1837264 ↗
18. Stability of Fe-Cr alloy interconnects under CH4-H2O atmosphere for SOFCs10.1016/S0378-7753(03)00058-2 ↗
19. Interaction between chromia forming alloy interconnects and air electrode of solid oxide fuel cells10.1016/S0167-2738(97)00247-6 ↗
20. Electrochemical properties of a SOFC cathode in contact with a chromium-containing alloy separator10.1016/S0167-2738(00)00654-8 ↗
21. Deposition of chromium species at Sr-Doped LaMnO3 electrodes in solid oxide fuel cells. I. Mechanism and kinetics10.1149/1.1394012 ↗
22. Early interaction between Fe-Cr alloy metallic interconnect and Sr-doped LaMnO3 cathodes of solid oxide fuel cells10.1557/JMR.2005.0101 ↗
23. Chromium poisoning of the porous composite cathode10.1149/1.2784197 ↗
24. Chromium poisoning of LSM/YSZ and LSCF/CGO composite cathodes10.1002/fuce.200800143 ↗
25. Chromium deposition and poisoning in dry and humidified air at (La0.8Sr0.2)0.9MnO3+δ cathodes of solid oxide fuel cells10.1016/j.ijhydene.2009.12.185 ↗
26. Characterization of Cr poisoning in a solid oxide fuel cell cathode using a high energy X-ray microbeam10.1149/1.3358262 ↗
27. The effect of chromium oxyhydroxide on solid oxide fuel cells10.1149/1.3266930 ↗
28. Microstructural degradation of (La,Sr)MnO3/YSZ cathodes in solid oxide fuel cells with uncoated E–brite interconnects10.1149/1.3515073 ↗
29. General considerations on degradation of Solid Oxide Fuel Cell anodes and cathodes due to impurities in gases10.1016/j.jpowsour.2010.07.093 ↗
30. Correlation between degradation of cathode performance and chromium concentration in (La,Sr)MnO3 cathode10.1016/j.ssi.2012.02.048 ↗
31. Chromium deposition and interfacial interactions of an electrolyte-air electrode-interconnect tri-layer for solid oxide fuel cells10.1016/j.jpowsour.2011.10.092 ↗
32. Chromium deposition and poisoning of cathodes of solid oxide fuel cells – A review10.1016/j.ijhydene.2013.10.042 ↗
33. Formation of chromium containing impurities in (La,Sr)MnO3 solid-oxide-fuel-cell cathodes under stack operating conditions and its effect on performance10.1016/j.ceramint.2016.03.010 ↗
34. Chromium poisoning of La1−xSrxMnO3±δ cathodes and electrochemical validation of chromium getters in intermediate temperature-solid oxide fuel cells10.1149/2.0931913jes ↗
35. A review of Solid Oxide Fuel Cell cathode materials with respect to their resistance to the effects of chromium poisoning10.1016/j.ssi.2020.115410 ↗
36. Comprehensive review of chromium deposition and poisoning of solid oxide fuel cells (SOFCs) cathode materials10.1016/j.rser.2020.110320 ↗
37. Chromium poisoning for prolonged lifetime of electrodes in solid oxide fuel cells - Review10.1016/j.ceramint.2020.11.082 ↗
38. Reduction of chromium vaporization from SOFC interconnectors by highly effective coatings10.1016/j.jpowsour.2006.08.013 ↗
39. CuMn1.8O4 protective coatings on metallic interconnects for prevention of Cr-poisoning in solid oxide fuel cells10.1016/j.jpowsour.2017.12.031 ↗
40. Enhanced Cr-tolerance of an SOFC cathode by an efficient electro-catalyst coating10.1016/j.nanoen.2020.104704 ↗
41. Deconvolution of deterioration of anode-supported cells by chromium poisoning from alumina-forming austenitic stainless steels for balance of plant applications in solid oxide fuel cells10.1016/j.electacta.2022.140933 ↗
42. Low-cost getters for gaseous chromium removal in high-temperature electrochemical systems10.1007/s11837-018-3196-2 ↗
43. An effective strategy to enhancing tolerance to contaminants poisoning of solid oxide fuel cell cathodes10.1016/j.nanoen.2018.03.043 ↗
44. Electrochemical cleaning: An in-Situ method to reverse chromium poisoning in solid oxide fuel cell cathodes10.1016/j.jpowsour.2020.228474 ↗
45. A modeling study of lifetime and performance improvements of solid oxide fuel cell by reversed pulse operation10.1016/j.jpowsour.2022.231048 ↗
46. Chromium poisoning mitigation strategy in strontium-doped lanthanum manganite-based air electrodes in solid oxide fuel cells
47. Degradation of solid oxide electrolysis cells: Phenomena, mechanisms, and emerging mitigation strategies—A review10.1016/j.jmst.2019.07.026 ↗
48. Computational and experimental study on the combined sulfur and chromium poisoning mechanism of LSM, LSCF and LNO cathodes10.1149/11106.2005ecst ↗
49. Theoretical and experimental investigation of the thermochemistry of CrO2(OH)2(g)10.1021/jp0647380 ↗
50. Thermodynamics of gas phase chromium species: the chromium chlorides, oxychlorides, fluorides, oxyfluorides, hydroxides, oxyhydroxides, mixed oxyfluorochlorohydroxides, and volatility calculations in waste incineration processes10.1016/0010-2180(94)00215-E ↗
51. Chromium poisoning in (La,Sr)MnO3 cathode: Three-dimensional simulation of a solid oxide fuel cell10.1016/j.jpowsour.2016.06.110 ↗
52. Machine-learning-assisted prediction of long-term performance degradation on solid oxide fuel cell cathodes induced by chromium poisoning10.1039/D2TA03944C ↗
53. Electrochemical model of solid oxide fuel cell for simulation at the stack scale II: Implementation of degradation processes10.1149/1.3596435 ↗
54. Multiscale modeling of degradation of full solid oxide fuel cell stacks10.1016/j.ijhydene.2021.05.204 ↗
55. Multiscale modelling potentialities for solid oxide fuel cell performance and degradation analysis10.1039/D2SE01118B ↗
56. Three-dimensional reconstruction of a solid-oxide fuel-cell anode10.1038/nmat1668 ↗
57. 3D reconstruction and characterization of polycrystalline microstructures using a FIB-SEM system10.1016/j.matchar.2006.01.019 ↗
58. Comparison of SOFC cathode microstructure quantified using X-ray nanotomography and focused ion beam–scanning electron microscopy10.1016/j.elecom.2011.03.016 ↗
59. A method for quantitative 3D mesoscale analysis of solid oxide fuel cell microstructures using Xe-plasma focused ion beam (PFIB) coupled with SEM10.1149/07801.2159ecst ↗
60. Mesoscale characterization of local property distributions in heterogeneous electrodes10.1016/j.jpowsour.2018.03.025 ↗
61. Three-dimensional analysis of porous BaTiO3 ceramics using FIB nanotomography10.1111/j.0022-2720.2004.01397.x ↗
62. Nondestructive reconstruction and analysis of SOFC anodes using X-ray computed tomography at sub-50 nm resolution10.1149/1.2895067 ↗
63. Quantifying intermediate-frequency heterogeneities of SOFC electrodes using X-ray computed tomography10.1111/jace.14775 ↗
64. Three-dimensional simulation of SOFC anode polarization characteristics based on sub-grid scale modeling of microstructure10.1149/2.086203jes ↗
65. Improvement of the sub-grid-scale model designed for 3D numerical simulation of solid oxide fuel cell electrodes using an adaptive power index10.1016/j.jpowsour.2012.09.077 ↗
66. Towards quantificaton of local electrochemical parameters in microstructures of solid oxide fuel cell electrodes using high performance computations10.1149/07801.2711ecst ↗
67. Hsu · 2019 · 205
68. High performance modeling of heterogeneous SOFC electrode microstructures using the MOOSE framework: ERMINE (Electrochemical Reactions in MIcrostructural NEtworks)10.1016/j.mex.2020.100822 ↗
69. Distributions of local electrochemistry in heterogeneous microstructures of solid oxide fuel cells using high-performance computations10.1016/j.electacta.2020.136191 ↗
70. High performance finite element simulations of infiltrated solid oxide fuel cell cathode microstructures10.1016/j.jpowsour.2022.231652 ↗
71. Advantages of ionic conductors over electronic conductors as infiltrates in solid oxide fuel cell cathodes10.1016/j.ijhydene.2024.02.029 ↗
72. Multi-physics modelling of fault mechanics using REDBACK: A parallel open-source simulator for tightly coupled problems10.1007/s00603-016-0927-y ↗
73. Physics-based multiscale coupling for full core nuclear reactor simulation10.1016/j.anucene.2014.09.060 ↗
74. Kim · 2023 · 224
75. Oxygen chemical diffusion in strontium doped lanthanum manganites10.1016/0167-2738(92)90166-M ↗
76. Electrical properties and oxygen diffusion in yttria-stabilised zirconia (YSZ)-La0.8Sr0.2MnO3±δ (LSM) composites10.1016/j.ssi.2004.11.019 ↗
77. Review on modeling development for multiscale chemical reactions coupled transport phenomena in solid oxide fuel cells10.1016/j.apenergy.2009.11.013 ↗
78. Accelerated lifetime tests for SOFCs10.1149/06801.1953ecst ↗
79. High-performance SOFC cathodes prepared by infiltration10.1002/adma.200802428 ↗
80. Solid oxide fuel cell cathodes prepared by infiltration of LaNi0.6Fe0.4O3 and La0.91Sr0.09Ni0.6Fe0.4O3 in porous yttria-stabilized zirconia10.1016/j.jpowsour.2009.04.046 ↗
81. Long-term stability of SOFC composite cathode activated by electrocatalyst infiltration10.1149/2.067207jes ↗
82. Enhancing activity, charge transport, power production, and stability of commercial solid oxide fuel cells with yttria-stabilized zirconia nanoparticles10.1149/1945-7111/ab6eed ↗
83. Chromium poisoning of perovskite cathodes by the ODS alloy Cr5Fe1Y2O3 and the high chromium ferritic steel Crofer22APU10.1149/1.2172563 ↗