journal article·2023-11

A new 3D porous metallic carbon allotrope composed of 5–7 nanoribbons as an anode material for sodium-ion batteries

Wei Sun, Dongyuan Ni, Changsheng Hou, Qian Wang, Yoshiyuki Kawazoe, Puru Jena

Publisher page

Abstract

Motivated by the successful synthesis of three-dimensional (3D) graphene monoliths, tremendous effort has been devoted to the design of 3D porous metallic carbon allotropes with rich topology by assembling various nanoribbons for the anode materials of metal-ion batteries in recent years. Going beyond the allotropes reported so far we propose a new 3D carbon monolith, Hex-C 57 , by using 5–7 nanoribbons observed in the experiment as the building block. Hex-C 57 is found to be dynamically, thermally, and mechanically stable, and electronically metallic. An analysis based on the tight-binding model reveals that the metallicity originates from the p z-orbitals of the sp 2-hybridized carbon atoms, forming the conducting channels along the axial direction. With the advantages of intrinsic metallicity, mechanical ductility, and ordered pores, Hex-C 57 is a highly promising anode material for sodium-ion batteries (SIBs). Calculations of the electrochemical properties show that Hex-C 57 possesses a high reversible gravimetric capacity (334.69 mAhg −1) and volumetric capacity (314.61 mAhcm −3 ), a small volume change (1.45%), very low diffusion barriers (0.046–0.070 eV), and a low average open-circuit voltage (0.18 V). This work not only expands the 3D porous carbon family with different nanoribbons as the building blocks, but also demonstrates the functionality of unconventional 5–7 carbon rings-assembled materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Graphene research and applications · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Research development on sodium-ion batteries10.1021/cr500192f ↗
2. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
3. Revealing the intercalation mechanisms of lithium, sodium, and potassium in hard carbon
4. Is graphite nanomesh a promising anode for the Na/K-Ions batteries?10.1016/j.carbon.2020.12.039 ↗
5. Recent advances in topological quantum anode materials for metal-ion batteries10.1016/j.jpowsour.2022.231655 ↗
6. Potential of porous nodal-line semi-metallic carbon for sodium-ion battery anode10.1016/j.jpowsour.2020.228746 ↗
7. Bco-C24: a new 3D Dirac nodal line semi-metallic carbon honeycomb for high performance metal-ion battery anodes10.1016/j.carbon.2019.12.069 ↗
8. A Dirac nodal surface semi-metallic carbon-based structure as a universal anode material for metal-ion batteries with high performance10.1039/D1CP02306C ↗
9. Design of 3D topological nodal-net porous carbon for sodium-ion battery anodes10.1039/D2TA00652A ↗
10. Grains and grain boundaries in single-layer graphene atomic patchwork quilts10.1038/nature09718 ↗
11. Structural defects in graphene10.1021/nn102598m ↗
12. Controlled growth of a line defect in graphene and implications for gate-tunable valley filtering10.1103/PhysRevB.89.121407 ↗
13. Defects in graphene: generation, healing, and their effects on the properties of graphene: a review10.1016/j.jmst.2014.11.019 ↗
14. An extended defect in graphene as a metallic wire10.1038/nnano.2010.53 ↗
15. Correlated magnetic states in extended one-dimensional defects in graphene10.1021/nl3017434 ↗
16. Two-dimensional carbon allotrope with strong electronic anisotropy10.1103/PhysRevB.87.075453 ↗
17. Hex-C558: a new porous metallic carbon allotrope for lithium-ion battery anode10.1016/j.carbon.2021.07.045 ↗
18. Self-passivating edge reconstructions of graphene10.1103/PhysRevLett.101.115502 ↗
19. Graphene at the edge: stability and dynamics10.1126/science.1166999 ↗
20. Helical nanographenes containing an azulene unit: synthesis, crystal structures, and properties10.1002/anie.201914716 ↗
21. On-surface synthesis of non-benzenoid nanographenes by oxidative ring-closure and ring-rearrangement reactions10.1021/jacs.0c05668 ↗
22. Defective nanographenes containing seven-five-seven (7-5-7)-membered rings10.1021/jacs.0c12116 ↗
23. Anomalous strength characteristics of tilt grain boundaries in graphene10.1126/science.1196893 ↗
24. Structural and electronic properties of pentagon-heptagon pair defects in carbon nanotubes10.1103/PhysRevB.53.11108 ↗
25. New metallic allotropes of planar and tubular carbon10.1103/PhysRevLett.84.1716 ↗
26. Unraveling the key atomic interactions in determining the varying Li/Na/K storage mechanism of hard carbon anodes
27. Dual-function presodiation with sodium diphenyl ketone towards ultra-stable hard carbon anodes for sodium-ion batteries10.1002/anie.202214717 ↗
28. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
29. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
30. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
31. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
32. Hybrid functionals based on a screened Coulomb potential10.1063/1.1564060 ↗
33. Erratum: “Hybrid functionals based on a screened Coulomb potential”
34. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
35. First-principles determination of the soft mode in cubic ZrO210.1103/PhysRevLett.78.4063 ↗
36. First principles phonon calculations in materials science10.1016/j.scriptamat.2015.07.021 ↗
37. wannier90: a tool for obtaining maximally-localised Wannier functions10.1016/j.cpc.2007.11.016 ↗
38. On the use of accelerated molecular dynamics to enhance configurational sampling in ab initio simulations10.1021/ct100605v ↗
39. The nose–hoover thermostat10.1063/1.449071 ↗
40. Quantum and thermal effects in H2 dissociative adsorption: evaluation of free energy barriers in multidimensional quantum systems10.1103/PhysRevLett.72.1124 ↗
41. Semiempirical GGA-type density functional constructed with a long-range dispersion correction10.1002/jcc.20495 ↗
42. A new 3D Dirac nodal-line semi-metallic graphene monolith for lithium ion battery anode materials10.1039/C8TA04428G ↗
43. Body-centered orthorhombic C16: a novel topological node-line semimetal10.1103/PhysRevLett.116.195501 ↗
44. Stable three-dimensional metallic carbon with interlocking hexagons10.1073/pnas.1311028110 ↗
45. A new porous metallic carbon allotrope with interlocking pentagons for sodium-ion battery anode material10.1002/adts.202100025 ↗
46. Necessary and sufficient elastic stability conditions in various crystal systems10.1103/PhysRevB.90.224104 ↗
47. Extreme values of Young's modulus and Poisson's ratio of hexagonal crystals10.1016/j.mechmat.2019.03.017 ↗
48. Crystal structures and elastic properties of superhard IrN2 and IrN3 from first principles
49. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
50. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
51. A simple measure of electron localization in atomic and molecular systems10.1063/1.458517 ↗
52. A grid-based Bader analysis algorithm without lattice bias10.1088/0953-8984/21/8/084204 ↗
53. Mussel-inspired nitrogen-doped porous carbon as anode materials for sodium-ion batteries10.1002/ente.201800763 ↗
54. Carbon anode materials for advanced sodium-ion batteries10.1002/aenm.201602898 ↗
55. Electrolytes, SEI formation, and binders: a review of nonelectrode factors for sodium-ion battery anodes10.1002/smll.201703576 ↗
56. Solid electrolyte interphases: review of emerging concepts in SEI analysis and artificial SEI membranes for lithium, sodium, and potassium metal battery anodes (Adv. Energy Mater. 43/2020
57. Python Materials Genomics (pymatgen): a robust, open-source python library for materials analysis10.1016/j.commatsci.2012.10.028 ↗
58. Lithium chlorides and bromides as promising solid-state chemistries for fast ion conductors with good electrochemical stability10.1002/anie.201901938 ↗
59. Tailoring sodium intercalation in graphite for high energy and power sodium ion batteries10.1038/s41467-019-10551-z ↗