All-printed supercapacitor array with vertical stacking
Source abstract
Abstract
Additive manufacturing technologies offer synergistic benefits in supercapacitor manufacturing through sequential layer-by-layer processes, high resource efficiency, sustainable operation and amenability for flexible devices. While cell-level fabrication of a printed supercapacitor has been established, an efficient expansion strategy for developing an array-level supercapacitor system is still required. An all-printed supercapacitor array, composed of multiple supercapacitors with internal interconnections in series and parallel, is introduced in this work. The process is based on sequential layer-by-layer printing using customized inks with interconnections between cells done automatically by extended current collector lines, which eliminate additional interconnection steps. The effect of series and parallel connections on array performance is evaluated through experimental and theoretical analysis of array configuration dependence, and an array design guideline is suggested based on the results. The entire process is compatible with flexible substrates, allowing vertical stacking through a controlled cut-and-fold process. Vertical stacking increases the areal efficiency significantly with only negligible loss of performance. The measured performance factors of the arrays are in good agreement with theoretical expectations, yielding an areal capacitance of 0.101 F/cm 2 , areal energy density of 0.081 mWh/cm 2 and areal power density of 1.21 mW/cm 2 for a 3 × 3 array. The expected performance factors for various array configurations are also provided based on simulation results.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Sensor and Energy Harvesting Materials · Neuroscience and Neural Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Nanostructured materials for supercapacitors
2. 3D printed functional nanomaterials for electrochemical energy storage10.1016/j.nantod.2017.06.007 ↗
3. Supercapacitor: evolution and review, mater
4. Review on supercapacitors: technologies and performance evaluation10.1016/j.jechem.2020.11.013 ↗
5. Performance of printable supercapacitors in an RF energy harvesting circuit10.1016/j.ijepes.2014.01.004 ↗
6. Hybrid solar-wind energy harvesting for embedded applications: supercapacitor-based system architectures and design tradeoffs10.1109/MCAS.2017.2757081 ↗
7. Hybrid battery/supercapacitor energy storage system for the electric vehicles10.1016/j.jpowsour.2017.11.040 ↗
8. A review of supercapacitor modeling, estimation, and applications: a control/management perspective10.1016/j.rser.2017.05.283 ↗
9. Inkjet-printed energy storage device using graphene/polyaniline inks10.1016/j.jpowsour.2013.09.096 ↗
10. Three dimensional (3D) printed electrodes for interdigitated supercapacitors10.1016/j.elecom.2014.01.013 ↗
11. All-inkjet-printed, solid-state flexible supercapacitors on paper10.1039/C6EE00966B ↗
12. Supercapacitors based on three-dimensional hierarchical graphene aerogels with periodic macropores10.1021/acs.nanolett.5b04965 ↗
13. 3D printing of highly flexible supercapacitor designed for wearable energy storage10.1016/j.mseb.2017.09.004 ↗
14. Methodologies for fabricating flexible supercapacitors10.3390/mi12020163 ↗
15. Feasibility analysis of commercial in-space manufacturing applications
16. Evaluation of supercapacitors for space applications under thermal vacuum conditions10.1016/j.jpowsour.2018.01.038 ↗
17. Direct printing and reduction of graphite oxide for flexible supercapacitors10.1063/1.4890840 ↗
18. High-performance solid-state supercapacitors and microsupercapacitors derived from printable graphene inks10.1002/aenm.201600909 ↗
19. Fully packaged carbon nanotube supercapacitors by direct ink writing on flexible substrates10.1021/acsami.7b06804 ↗
20. Printable nanomaterials for the fabrication of high-performance supercapacitors10.3390/nano8070528 ↗
21. Printed supercapacitors: materials, printing and applications10.1039/C7CS00819H ↗
22. All-printed in-plane supercapacitors by sequential additive manufacturing process10.1021/acsaem.0c00510 ↗
23. 3D crumpled ultrathin 1T MoS2for inkjet printing of Mg-ion asymmetric micro-supercapacitors10.1021/acsnano.0c02585 ↗
24. Supercapacitor management system: a comprehensive review of modeling, estimation, balancing, and protection techniques10.1016/j.rser.2021.111913 ↗
25. Printable gel polymer electrolytes for solid-state printed supercapacitors10.3390/ma14020316 ↗
26. Towards out of earth manufacturing: overview of the ESA materials and processes activities on manufacturing in space