journal article·2017-08Open access

O2 plasma sintering study of TiO2 photoelectrodes in dye solar cells

R.S. Moraes, A.D. Gonçalves, C. Stegemann, A.S. da Silva Sobrinho, W. Miyakawa, M. Massi

Abstract

Abstract The development of more efficient photoelectrochemical solar cells has been, over the years, the subject of many scientific researches. In this paper a methodology was established to carry out the sintering process of nanoporous TiO2 layer by using plasma, which was compared with sintered layers made by the conventional sintering process in a furnace. The TiO2 commercial paste was spread by doctor-blading technique and subjected to different sintering processes. Porous layer samples were subjected to structural and morphological analyses. Then photoelectrodes dye-loading was measured by optical spectrophotometry. The quality of the layers under plasma sintering process in terms of weight loss and removal of organic compounds was evaluated by thermogravimetric analysis, mass spectrometry and FT-IR. The results showed that the plasma sintering process favors the adsorption of dye on the layer surface due to the creation of active states caused by O2 reactive plasma. Furthermore the O2 plasma process provides enough energy for removing organic compounds arising from the TiO2 paste and for providing nanoparticle sintering. Solar cells assembled with the plasma-sintered layers had a power conversion efficiency 20.1% higher than the obtained in solar cells sintered in a conventional furnace, proving the efficiency of the plasma sintering process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Transparent conductors as solar energy materials: a panoramic review10.1016/j.solmat.2007.04.031 ↗
2. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
3. Dye-sensitized solar cells10.1021/cr900356p ↗
4. Dye sensitized solar cells: a review10.1080/0371750X.2012.689503 ↗
5. Dye sensitized solar cells for economically viable photovoltaic systems10.1021/jz400112n ↗
6. New architectures for dye-sensitized solar cells10.1002/chem.200701667 ↗
7. Recent advances in sensitized mesoscopic solar cells10.1021/ar900141y ↗
8. Estimating the manufacturing cost of purely organic solar cells10.1016/j.solener.2009.02.003 ↗
9. Modifying TiO 2 surface architecture by oxygen plasma to increase dye sensitized solar cell efficiency
10. Enhanced photocurrent of nitrogen-doped TiO 2 film for dye-sensitized solar cells10.1016/j.matchemphys.2010.06.059 ↗
11. Low-temperature oxygen plasma treatment of TiO2 film for enhanced performance of dye-sensitized solar cells10.1016/j.jpowsour.2007.09.112 ↗
12. Extremely enhanced photovoltaic properties of dye-sensitized solar cells by sintering mesoporous TiO 2 photoanodes with crystalline titania chelated by acetic acid10.1016/j.jpowsour.2016.02.009 ↗
13. Influence of TiO 2 electrode properties on performance of dye- sensitized solar cells
14. Effects of paste components on the properties of screen-printed porous TiO 2 film for dye-sensitized solar cells10.1016/j.renene.2009.07.010 ↗
15. S. Senthilarasu, T.A.N. Peiris, et al. Preparation of Nanocrystalline TiO 2 Electrodes for Flexible Dye-Sensitized Solar Cells: Influence of Mechanical Compression.
16. Preparation of photoactive nitrogen-doped rutile10.1016/j.apsusc.2012.12.048 ↗
17. Chemical sintering of graded TiO 2 film at low-temperature for flexible dye-sensitized solar cells
18. Energy harvesting of flexible and translucent dye-sensitized solar cell fabricated by laser assisted nano particle deposition system10.1016/j.electacta.2013.04.050 ↗
19. Laser-assisted nano particle deposition system and its application for dye sensitized solar cell fabrication10.1016/j.cirp.2012.03.094 ↗
20. Low temperature preparation of mesoporous TiO2 films for efficient dye-sensitized photoelectrode by chemical vapor deposition combined with UV light irradiation10.1016/j.jphotochem.2003.11.021 ↗
21. Development of low-temperature sintering technique for dye-sensitized solar cells combined with dielectric barrier discharge treatment10.7567/JJAP.51.056201 ↗
22. Dye-sensitized solar cells with nanoporous TiO 2 photoanodes sintered by N 2 and air atmospheric pressure plasma jets with/without air-quenching
23. M. Wang, D. Zhang, et al. Fabrication of Porous Nanocrystalline TiO 2 Materials by SPS.
24. Dye-sensitized solar cells: spectroscopic evaluation of dye loading on TiO210.1039/c2jm30481c ↗
25. Enhanced photoelectrochemical performance of ZnO electrodes sensitized with N-71910.1016/j.jphotochem.2005.07.018 ↗
26. Fabrication of ZnO films consisting of densely accumulated mesoporous nanosheets and their dye-sensitized solar cell performance10.1016/j.tsf.2007.07.136 ↗
27. Intrinsic defects of TiO2(110): interaction with chemisorbed O2, H2, CO, and CO210.1103/PhysRevB.28.3427 ↗
28. Intrinsic defects on a TiO2(110)(1×1) surface and their reaction with oxygen: a scanning tunneling microscopy study10.1016/S0039-6028(98)00356-2 ↗
29. Interaction of water, oxygen, and hydrogen with TiO2(110) surfaces having different defect densities10.1116/1.577986 ↗
30. Influence of oxygen and water related surface defects on the dye sensitized TiO2 solar cell10.1016/S0927-0248(98)00153-6 ↗
31. Raman Spectrum of anatase, TiO
32. Raman scattering study on anatase TiO2 nanocrystals10.1088/0022-3727/33/8/305 ↗
33. Modeling of the dye loading time influence on the electrical impedance of a dye-sensitized solar cell10.1063/1.4819207 ↗
34. Strategy to improve the performance of dye-sensitized solar cells: interface engineering principle10.1016/j.solener.2009.10.005 ↗
35. Nanostructured thin films based on TiO2 and/or SiC for use in photoelectrochemical cells: a review of the material characteristics, synthesis and recent applications10.1016/j.mssp.2014.05.053 ↗
36. Low-temperature versus oxygen plasma treatment of water-based TiO2 paste for dye-sensitized solar cells10.1007/s10971-013-3135-1 ↗
37. Sputter deposition and surface treatment of TiO2 films for dye-sensitized solar cells using reactive RF plasma10.1016/j.tsf.2006.10.079 ↗
38. Dye-sensitized TiO2 nanotube solar cells with markedly enhanced performance via rational surface engineering10.1021/cm903164k ↗
39. Enhanced efficiency for dye-sensitized solar cells using a surface-treated photo-anode10.1016/j.jpowsour.2011.10.072 ↗