“Additive fabrication of fully-integrated high-performance millimeter-scale microsupercapacitors: Fine-tuning chemistry to maximize performance’’
Source abstract
Abstract
Microsupercapacitors (MSCs) are attractive for use as energy devices to power wearables, IoT, and other small microsystems. Additive fabrication of these devices will facilitate easy integration into a range of ubiquitous microsystem platforms. In this work, MSCs with lateral sizes < 0.5 cm2 (full package: 7 mm × 7 mm and charge storage active area: 4 mm × 3.5 mm) and total height of ∼2 mm with remarkable electrochemical performance are fully 3D printed via a combination of FDM printing and 3D extrusion-based printing. By fine-tuning the chemistries of the components of the MSCs, a combination of high energy density of 16.1 μWh.cm−2, power density of ∼3028 mW.cm−2, areal capacitance of ∼323 mF.cm−2, and ∼91.3% capacitance retention after 21000 cycles are realized. These performance levels are achieved using novel inks for the electrodes, electrolytes, and current collectors in addition to provision of proper packaging and encapsulation of the devices. The demonstrated performance of these encapsulated millimeter-scale fully additively fabricated MSCs with thick electrodes (i.e., ∼300 μm) thus makes them attractive for use as integrated energy sources for powering microsystems, wearables, and IoT.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Sensor and Energy Harvesting Materials · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (95)
Show source-provided references
1. All-solid-state thin-film lithium-sulfur batteries10.1007/s40820-023-01064-y ↗
2. Ultrahigh-power iron oxysulfide thin films for microbatteries10.1007/s40843-022-2152-3 ↗
3. Vertical graphene film enables high-performance quasi-solid-state planar zinc-ion microbatteries10.1021/acsami.2c22043 ↗
4. Silicon-based 3D all-solid-state micro-supercapacitor with superior performance10.1021/acsami.0c14441 ↗
5. Microsupercapacitors as miniaturized energy-storage components for on-chip electronics10.1038/nnano.2016.196 ↗
6. Recent developments of advanced micro-supercapacitors: design, fabrication and applications10.1038/s41528-020-00093-6 ↗
7. Perspective on 3D-designed micro-supercapacitors10.1016/j.matdes.2020.108797 ↗
8. Energy storage: the future enabled by nanomaterials10.1126/science.aan8285 ↗
9. Recent advances in micro-supercapacitors for AC line-filtering performance: from fundamental models to emerging applications10.1016/j.esci.2021.11.005 ↗
10. Three‐dimensional printing of graphene‐based materials for energy storage and conversion10.1002/sus2.27 ↗
11. Free-standing flexible graphene-based aerogel film with high energy density as an electrode for supercapacitors10.1016/j.nanoms.2020.03.003 ↗
12. Stamping fabrication of flexible planar micro‐supercapacitors using porous graphene inks
13. A stretchable vertically stacked microsupercapacitor with kirigami-bridged island structure: MnO2/graphene/Poly(3,4-ethylenedioxythiophene) nanocomposite electrode through pen lithography10.1016/j.jpowsour.2020.227898 ↗
14. 3D printing quasi-solid-state asymmetric micro-supercapacitors with ultrahigh areal energy density10.1002/aenm.201800408 ↗
15. Inkjet printing of single-walled carbon nanotube/RuO2 nanowire supercapacitors on cloth fabrics and flexible substrates10.1007/s12274-010-0020-x ↗
16. A synergistic self-assembled 3D PEDOT:PSS/graphene composite sponge for stretchable microsupercapacitors10.1039/C9TA07383C ↗
17. Additive-free MXene inks and direct printing of micro-supercapacitors10.1038/s41467-019-09398-1 ↗
18. On‐Chip MXene microsupercapacitors for AC‐line filtering applications10.1002/aenm.201901061 ↗
19. Stretchable Ti 3 C 2 T x MXene microsupercapacitors with high areal capacitance and quasi-solid-state multivalent neutral electrolyte10.1039/D0TA10560K ↗
20. Design of architectures and materials in in-plane micro-supercapacitors: current status and future challenges10.1002/adma.201602802 ↗
21. Interfacial approach toward benzene‐bridged polypyrrole film–based micro‐supercapacitors with ultrahigh volumetric power density10.1002/adfm.201908243 ↗
22. Fabrication of high performance flexible micro-supercapacitor arrays with hybrid electrodes of MWNT/V 2 O 5 nanowires integrated with a SnO 2 nanowire UV sensor10.1039/C4NR04138K ↗
23. Ultrasmall integrated 3D micro-supercapacitors solve energy storage for miniature devices10.1002/aenm.201301269 ↗
24. Turning trash into treasure: additive free MXene sediment inks for screen‐printed micro‐supercapacitors10.1002/adma.202000716 ↗
25. Graphene-based in-plane micro-supercapacitors with high power and energy densities10.1038/ncomms3487 ↗
26. Novel and high-performance asymmetric micro-supercapacitors based on graphene quantum dots and polyaniline nanofibers10.1039/c3nr01139a ↗
27. All-solid-state flexible ultrathin micro-supercapacitors based on graphene10.1002/adma.201301332 ↗
28. Facile fabrication of flexible all solid-state micro-supercapacitor by direct laser writing of porous carbon in polyimide10.1016/j.carbon.2014.11.017 ↗
29. High-energy all-in-one stretchable micro-supercapacitor arrays based on 3D laser-induced graphene foams decorated with mesoporous ZnP nanosheets for self-powered stretchable systems10.1016/j.nanoen.2020.105609 ↗
30. Tailoring surface chemistry and morphology of titanium nitride electrode for on-chip supercapacitors10.1021/acssuschemeng.0c00977 ↗
31. Hybrid microsupercapacitors with vertically scaled 3D current collectors fabricated using a simple cut-and-transfer strategy10.1002/aenm.201601257 ↗
32. A printable metallic current collector for all‐printed high‐voltage micro‐supercapacitors: instantaneous surface passivation by flash‐light‐sintering reaction
33. Integration of electrochemical microsupercapacitors with thin film electronics for on‐chip energy storage
34. Lithographically integrated microsupercapacitors for compact, high performance, and designable energy circuits10.1002/aenm.201500741 ↗
35. Suspended wavy graphene microribbons for highly stretchable microsupercapacitors10.1002/adma.201502549 ↗
36. All-MXene (2D titanium carbide) solid-state microsupercapacitors for on-chip energy storage10.1039/C6EE01717G ↗
37. Spray-coated paper supercapacitors10.1038/s41528-020-0079-8 ↗
38. High-performance pseudocapacitive microsupercapacitors from laser-induced graphene10.1002/adma.201503333 ↗
39. Wearable textile-based in-plane microsupercapacitors10.1002/aenm.201601254 ↗
40. 3D RuO 2 microsupercapacitors with remarkable areal energy10.1002/adma.201503054 ↗
41. Asymmetric micro-supercapacitors based on electrodeposited Ruo2 and sputtered VN films10.1016/j.ensm.2021.02.006 ↗
42. Co-Electrodeposited porous PEDOT–CNT microelectrodes for integrated micro-supercapacitors with high energy density, high rate capability, and long cycling life10.1039/C9NR00765B ↗
43. 3D‐Printed stretchable micro‐supercapacitor with remarkable areal performance
44. Fully packaged carbon nanotube supercapacitors by direct ink writing on flexible substrates10.1021/acsami.7b06804 ↗
45. Elaboration of a microstructured inkjet-printed carbon electrochemical capacitor10.1016/j.jpowsour.2009.08.085 ↗
46. High‐performance solid‐state supercapacitors and microsupercapacitors derived from printable graphene inks10.1002/aenm.201600909 ↗
47. Scalable production of graphene inks via wet‐jet milling exfoliation for screen‐printed micro‐supercapacitors10.1002/adfm.201807659 ↗
48. 3D printing of additive-free 2D Ti 3 C 2 T x (MXene) ink for fabrication of micro-supercapacitors with ultra-high energy densities10.1021/acsnano.9b07325 ↗
49. Three-Dimensional printing of polyaniline/reduced graphene oxide composite for high-performance planar supercapacitor10.1021/acsami.7b19635 ↗
50. Direct‐ink‐write 3D printing of programmable micro‐supercapacitors from MXene‐regulating conducting polymer inks10.1002/aenm.202203683 ↗
51. 3D printing of carbon nanotubes-based microsupercapacitors10.1021/acsami.6b13904 ↗
52. Development of graphene oxide/polyaniline inks for high performance flexible microsupercapacitors via extrusion printing
53. 3D printing technologies for electrochemical energy storage10.1016/j.nanoen.2017.08.037 ↗
54. Recent development of printed micro‐supercapacitors: printable materials, printing technologies, and perspectives
55. Highly dispersible edge-selectively oxidized graphene with improved electrical performance10.1039/C6NR05902C ↗
56. Size fractionation of graphene oxide sheets by pH-assisted selective sedimentation10.1021/ja200218y ↗
57. Controllable edge oxidation and bubbling exfoliation enable the fabrication of high quality water dispersible graphene10.1038/srep34127 ↗
58. A high performance supercapacitor based on a ceria/graphene nanocomposite synthesized by a facile sonochemical method10.1039/C5RA02957K ↗
59. Anchoring ceria nanoparticles on reduced graphene oxide and their electronic transport properties10.1021/jp206485v ↗
60. One step hydrothermal synthesis of a carbon nanotube/cerium oxide nanocomposite and its electrochemical properties10.1088/0957-4484/24/36/365401 ↗
61. Supercapacitor behavior of cerium oxide nanoparticles in neutral aqueous electrolytes10.1021/acs.energyfuels.5b02144 ↗
62. Cerium oxide nanosheets-based tertiary composites (CeO2/ZnO/ZnWO4) for supercapattery application and evaluation of faradic & non-faradic capacitive distribution by using Donn's model10.1016/j.est.2022.105778 ↗
63. Challenges and prospects of 3D micro-supercapacitors for powering the internet of things10.1039/C8EE02029A ↗
64. Direct graphene‐carbon nanotube composite ink writing all‐solid‐state flexible microsupercapacitors with high areal energy density10.1002/adfm.201907284 ↗
65. Flexible boron-doped laser-induced graphene microsupercapacitors10.1021/acsnano.5b00436 ↗
66. All-printed solid-state microsupercapacitors derived from self-template synthesis of Ag@PPy nanocomposites10.1002/admt.201700206 ↗
67. 3D printing of freestanding MXene architectures for current‐collector‐free supercapacitors10.1002/adma.201902725 ↗
68. Pencil-drawing skin-mountable micro-supercapacitors10.1002/smll.201804037 ↗
69. 3D-Printed PCL scaffolds coated with nanobioceramics enhance osteogenic differentiation of stem cells10.1021/acsomega.1c04015 ↗
70. Rapid continuous multimaterial extrusion bioprinting10.1002/adma.201604630 ↗
71. Microfluidics-Enabled multimaterial maskless stereolithographic bioprinting
72. A generalizable strategy for the 3D bioprinting of hydrogels from nonviscous photo‐crosslinkable inks10.1002/adma.201604983 ↗
73. 3D bioprinting of engineered tissue flaps with hierarchical vessel networks (VesselNet) for direct host‐to‐implant perfusion
74. Screen-printed water-based conductive ink on stretchable fabric for wearable micro-supercapacitor
75. Inkjet printing of δ-MnO2 nanosheets for flexible solid-state micro-supercapacitor10.1016/j.nanoen.2018.05.002 ↗
76. Chemically edge-carboxylated graphene enhances the thermal conductivity of polyetherimide–graphene nanocomposites10.1021/acsami.1c25279 ↗
77. Spontaneous intercalation of long-chain alkyl ammonium into edge-selectively oxidized graphite to efficiently produce high-quality graphene10.1038/srep02636 ↗
78. Large area, few-layer graphene films on arbitrary substrates by chemical vapor deposition10.1021/nl801827v ↗
79. Raman spectroscopy in graphene10.1016/j.physrep.2009.02.003 ↗
80. Preparation of graphene dispersions and graphene-polymer composites in organic media10.1039/b904935e ↗
81. Characterizing graphitic carbon with X-ray photoelectron spectroscopy: a step-by-step approach10.1002/cctc.201500344 ↗
82. Structure of graphite oxide revisited10.1021/jp9731821 ↗
83. Ce3+-ion, surface oxygen vacancy, and visible light-induced photocatalytic dye degradation and photocapacitive performance of CeO2-graphene nanostructures10.1038/s41598-017-06139-6 ↗
84. The effect of crystallinity on the rapid pseudocapacitive response of Nb2O510.1002/aenm.201100494 ↗
85. Ordered mesoporous α-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors10.1038/nmat2612 ↗
86. 3D printing of interdigitated dielectric elastomer actuators10.1002/adfm.201907375 ↗
87. 3D printing of customized Li‐ion batteries with thick electrodes10.1002/adma.201703027 ↗
88. Graphene oxide dispersions: tuning rheology to enable fabrication10.1039/C3MH00144J ↗
89. Pseudocapacitive contributions to electrochemical energy storage in TiO 2 (anatase) nanoparticles10.1021/jp074464w ↗
90. Microstructural effects on charge-storage properties in MnO 2 -based electrochemical supercapacitors10.1021/am900094e ↗
91. Controlled synthesis of CeO 2/graphene nanocomposites with highly enhanced optical and catalytic properties10.1021/jp3015113 ↗
92. Defect engineering in cubic cerium oxide nanostructures for catalytic oxidation10.1021/nl200722z ↗
93. Li + ion insertion in TiO 2 (anatase). 2. Voltammetry on nanoporous films10.1021/jp970490q ↗
94. Pseudocapacitance: from fundamental understanding to high power energy storage materials10.1021/acs.chemrev.0c00170 ↗
95. Use and mis-use of x-ray photoemission spectroscopy Ce3d spectra of Ce 2 O 3 and CeO 210.1088/1361-648X/aad248 ↗