Insights on designing non-PGM catalyst layers at low humidity
Source abstract
Abstract
Non-precious group metal (non-PGM) catalysts offer the opportunity to significantly reduce fuel cell costs. However, owing to its low volumetric activity, non-PGM electrodes are made an order of magnitude thicker than platinum-based electrodes. Thicker electrodes increase transport losses making it critical to optimize electrode composition. In most studies, non-PGM electrodes are tested with fully humidified O 2 /air to maximize the proton conductivity. However, the fully humidified inlet gas makes non-PGM electrodes more prone to water flooding which can cause long-term performance degradation. In the present study, a single-phase, non-isothermal model was used to investigate the structure-performance relationships of the non-PGM electrodes operated at low relative humidity. Our modeling study reveals that high porosity is not necessarily required for non-PGM electrodes operating at low relative humidity. Instead, high solid and electrolyte phase volume fractions are desired. Our proposed strategy is to reduce the thickness of the non-PGM electrode while keeping the mass loading of the non-PGM catalyst consistent.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Recent developments in catalyst-related PEM fuel cell durability10.1016/j.coelec.2020.02.007 ↗
2. New roads and challenges for fuel cells in heavy-duty transportation10.1038/s41560-021-00775-z ↗
3. Analysis of low platinum loading thin polymer electrolyte fuel cell electrodes prepared by inkjet printing10.1016/j.electacta.2015.01.028 ↗
4. Analysis of inkjet printed PEFC electrodes with varying platinum loading10.1149/2.1111607jes ↗
5. The key to high performance low Pt loaded electrodes10.1149/2.1621704jes ↗
6. Boosting fuel cell performance with accessible carbon mesopores10.1021/acsenergylett.8b00186 ↗
7. Mass-transport properties of electrosprayed Pt/C catalyst layers for polymer-electrolyte fuel cells10.1016/j.jpowsour.2019.04.079 ↗
8. Modeling the effect of low Pt loading cathode catalyst layer in polymer electrolyte fuel cells: Part I. Model formulation and validation10.1149/1945-7111/ac4456 ↗
9. Hierarchical wrinkle-structured catalyst layer/membrane interface for ultralow Pt-loading polymer electrolyte membrane fuel cells (PEMFCs)
10. Will there be enough platinum for a large deployment of fuel cell electric vehicles?10.1016/j.ijhydene.2021.09.149 ↗
11. Direct hydrogen fuel cell electric vehicle cost analysis: system and high-volume manufacturing description, validation, and outlook10.1016/j.jpowsour.2018.07.100 ↗
12. Platinum group metal-free catalysts boost cost competitiveness of fuel cell vehicles10.1038/s41929-019-0291-x ↗
13. Iron-based cathode catalyst with enhanced power density in polymer electrolyte membrane fuel cells10.1038/ncomms1427 ↗
14. Highly efficient nonprecious metal catalyst prepared with metal–organic framework in a continuous carbon nanofibrous network10.1073/pnas.1507159112 ↗
15. Direct atomic-level insight into the active sites of a high-performance PGM-free ORR catalyst10.1126/science.aan2255 ↗
16. Fe–N–C electrocatalyst with dense active sites and efficient mass transport for high-performance proton exchange membrane fuel cells10.1038/s41929-019-0237-3 ↗
17. High-performance fuel cell cathodes exclusively containing atomically dispersed iron active sites10.1039/C9EE00877B ↗
18. High power density platinum group metal-free cathodes for polymer electrolyte fuel cells10.1021/acsami.9b13945 ↗
19. Atomically dispersed iron sites with a nitrogen–carbon coating as highly active and durable oxygen reduction catalysts for fuel cells10.1038/s41560-022-01062-1 ↗
20. Modeling electrochemical performance of the hierarchical morphology of precious group metal-free cathode for polymer electrolyte fuel cell10.1149/2.0041712jes ↗
21. Toward platinum group metal-free catalysts for hydrogen/air proton-exchange membrane fuel cells10.1595/205651318X696828 ↗
22. Current status and future development of catalyst materials and catalyst layers for proton exchange membrane fuel cells: an industrial perspective10.1021/acsenergylett.6b00644 ↗
23. Integrating PGM-free catalysts into catalyst layers and proton exchange membrane fuel cell devices10.1002/adma.201804846 ↗
24. Recent advances in integrating platinum group metal-free catalysts in proton exchange membrane fuel cells
25. Nitrogen-doped carbon nanofiber catalyst for ORR in PEM fuel cell stack: performance, durability and market application aspects10.1016/j.ijhydene.2016.07.137 ↗
26. Critical advancements in achieving high power and stable nonprecious metal catalyst–based MEAs for real-world proton exchange membrane fuel cell applications10.1126/sciadv.aar7180 ↗
27. Impact of fabrication and testing parameters on the performance of a polymer electrolyte fuel cell with platinum group metal (PGM)-Free cathode catalyst10.1149/1945-7111/abd48e ↗
28. Effects of MEA fabrication and ionomer composition on fuel cell performance of PGM-free ORR catalyst
29. Resolving electrode morphology's impact on platinum group metal-free cathode performance using nano-CT of 3D hierarchical pore and ionomer distribution10.1021/acsami.6b08844 ↗
30. Elucidating the role of ionomer in the performance of platinum group metal-free catalyst layer via in situ electrochemical diagnostics
31. Effect of dispersion medium composition and ionomer concentration on the microstructure and rheology of Fe–N–C platinum group metal-free catalyst inks for polymer electrolyte membrane fuel cells10.1021/acs.langmuir.0c02015 ↗
32. Designing the 3D architecture of PGM-free cathodes for H2/air proton exchange membrane fuel cells10.1021/acsaem.9b01181 ↗
33. Improving the bulk gas transport of Fe-N-C platinum group metal-free nanofiber electrodes via electrospinning for fuel cell applications10.1016/j.nanoen.2020.104791 ↗
34. Fabrication of platinum group metal-free catalyst layer with enhanced mass transport characteristics via an electrospraying technique
35. Direct observations of liquid water formation at nano- and micro-scale in platinum group metal-free electrodes by operando X-ray computed tomography10.1016/j.mtener.2018.05.011 ↗
36. Understanding the role of interfaces for water management in platinum group metal-free electrodes in polymer electrolyte fuel cells10.1021/acsaem.9b00292 ↗
37. Understanding water management in platinum group metal-free electrodes using neutron imaging10.1016/j.jpowsour.2020.228442 ↗
38. Fuel cells – PROTON-EXCHANGE MEMBRANE FUEL CELLS | water management
39. Impact of heat and water management on proton exchange membrane fuel cells degradation in automotive application10.1016/j.jpowsour.2016.07.004 ↗
40. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
41. Mechanical behavior of fuel cell membranes under humidity cycles and effect of swelling anisotropy on the fatigue stresses10.1016/j.jpowsour.2007.03.063 ↗
42. Fe–N–C catalyst graphitic layer structure and fuel cell performance10.1021/acsenergylett.7b00391 ↗
43. Platinum group metal-free electrocatalysts: effects of synthesis on structure and performance in proton-exchange membrane fuel cell cathodes10.1016/j.jpowsour.2017.02.067 ↗
44. Analysis of non-isothermal effects on polymer electrolyte fuel cell electrode assemblies10.1016/j.electacta.2014.09.051 ↗
45. Optimization of a proton exchange membrane fuel cell membrane electrode assembly10.1007/s00158-009-0387-z ↗
46. R. O'Hayre, S.-W. Cha, W.G. Corella, F.B. Prinz, Fuel Cell Fundamentals, third ed., Wiley, n.d.
47. Dual-pathway kinetic equation for the hydrogen oxidation reaction on Pt electrodes10.1149/1.2218756 ↗
48. On the modeling of water transport in polymer electrolyte membrane fuel cells10.1016/j.electacta.2009.06.070 ↗
49. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
50. Measuring effective diffusivity in porous media with a gasket-free, radial arrangement10.1016/j.ijheatmasstransfer.2018.10.054 ↗
51. OpenFCST: an open-source mathematical modelling software for polymer electrolyte fuel cells10.1149/06403.0655ecst ↗
52. Algorithm 832: UMFPACK V4.3---an unsymmetric-pattern multifrontal method10.1145/992200.992206 ↗
53. Understanding single-phase water-management signatures in fuel-cell impedance spectra: a numerical study10.1016/j.electacta.2020.136204 ↗
54. Numerical optimization study of the catalyst layer of PEM fuel cell cathode10.1016/j.jpowsour.2003.08.043 ↗
55. Numerical optimization of proton exchange membrane fuel cell cathodes10.1016/j.electacta.2006.09.049 ↗
56. Temperature dependence of the electrode kinetics of oxygen reduction at the platinum/nafion® interface—a microelectrode investigation10.1149/1.2221258 ↗
57. Modeling the cathode compartment of polymer electrolyte fuel cells: dead and active reaction zones10.1149/1.1392580 ↗
58. Determination of catalyst unique parameters for the oxygen reduction reaction in a PEMFC10.1149/1.2266294 ↗
59. P. Zelenay, L.A.N. Laboratory, ElectroCat 2.0 (Electrocatalysis Consortium), (n.d.) 54.
60. Investigation of a microporous iron(III) porphyrin framework derived cathode catalyst in PEM fuel cells10.1039/C6TA03059A ↗
61. Analysis of the effect of catalyst layer thickness on the performance and durability of platinum group metal-free catalysts for polymer electrolyte membrane fuel cells10.1039/C9SE00252A ↗
62. Pore network modeling of compressed fuel cell components with OpenPNM10.1002/fuce.201500168 ↗
63. Status and challenges for the application of platinum group metal-free catalysts in proton-exchange membrane fuel cells
64. PGM-free oxygen-reduction catalyst development for proton-exchange membrane fuel cells: challenges, solutions, and promises10.1021/accountsmr.1c00226 ↗
65. Water management strategies for PGM-free catalyst layers for polymer electrolyte fuel cells
66. Nano-structured platinum group metal-free catalysts and their integration in fuel cell electrode architectures10.1016/j.apcatb.2017.08.067 ↗
67. An improved two-dimensional agglomerate cathode model to study the influence of catalyst layer structural parameters10.1016/j.electacta.2004.12.009 ↗
68. Computational analysis of gas transport in fuel cell catalyst layer under dry and partially saturated conditions10.1149/2.0081907jes ↗
69. Ordinary, transition, and Knudsen regime diffusion in random capillary structures10.1016/0009-2509(93)80149-K ↗
70. Relationship among microstructure, ionomer property and proton transport in pseudo catalyst layers10.1149/1.3598141 ↗
71. Characterization of the PEM fuel cell catalyst layer microstructure by nonlinear least-squares parameter estimation10.1149/2.041205jes ↗
72. Properties of Nafion® NR-211 membranes for PEMFCs10.1016/j.memsci.2010.03.025 ↗
73. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
74. Diffusion of water in nafion 115 membranes10.1149/1.1393879 ↗
75. Investigation of temperature-driven water transport in polymer electrolyte fuel cell: thermo-osmosis in membranes10.1016/j.memsci.2008.11.043 ↗
76. Proton conduction and oxygen reduction kinetics in PEM fuel cell cathodes: effects of ionomer-to-carbon ratio and relative humidity10.1149/1.3143965 ↗
77. Measurement of the through-plane thermal conductivity of carbon paper diffusion media for the temperature range from −50 to +120°C10.1016/j.ijhydene.2011.06.097 ↗
78. Measurement of in-plane thermal conductivity of carbon paper diffusion media in the temperature range of −20°C to +120°C10.1016/j.apenergy.2011.02.037 ↗
79. Assessment of transport-limited catalyst utilization for engineering of ultra-low Pt loading polymer electrolyte fuel cell anode10.1016/j.elecom.2006.10.057 ↗
80. Anisotropic, effective diffusivity of porous gas diffusion layer materials for PEFC10.1016/j.electacta.2008.07.034 ↗
81. In-plane effective diffusivity in PEMFC gas diffusion layers10.1007/s11242-016-0648-4 ↗