Preferential growth of HT-LiCo1-xAlxO2 cathode micro-bricks via an intermediate-facilitated solid-solid-gas reaction
Source abstract
Abstract
Layered high-temperature LiCoO 2 (HT-LiCoO 2 ), a mature commercial cathode for 3C electronic devices, has been unable to satisfy the new and ever-growing battery demands due to its high price and the structural instability at high temperature or high voltage conditions. The practical strategies mainly conclude introducing even dopants and functional modifications to LiCoO 2 crystals, but lacking explorations on the precise-control of non-equilibrium intermediates and preferred crystal planes during the solid-solid-gas (SSG) synthesis process. Here, the structure-optimal HT-LiCoO 2 micro-bricks are synthesized via coherent pyrolysis followed by a SSG reaction from Co–Al-mixed oxalate precursors, forming layered phase, ideal crystal morphology and uniformly distributed Al-dopants. In particular, we observe both of the phase progression and morphology evolution during the synthesis process of LiCo 1-xAl xO 2 micro-bricks. Integrating the superiorities of the nanosized intermediates and Al-doping regulation, smaller crystalline size and less salt-rock defects are realized in the target cathodes, ultimately achieving promoted Li + diffusion kinetic and electrochemical stability. Combined with the theory calculation, the optimized LiCo 1-xAl xO 2 with possible ion channels and the dopant-affected band gap have been simulated. These insights can help to guide the SSG synthesis of layered cathode materials with preferential orientations, precise doping and tailored phase compositions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · MXene and MAX Phase Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Prospects for lithium-ion batteries and beyond-a 2030 vision10.1038/s41467-020-19991-4 ↗
2. Battery lifetime prognostics10.1016/j.joule.2019.11.018 ↗
3. An overview on the advances of LiCoO2 cathodes for lithium-ion batteries
4. Pushing the limit of 3d transition metal-based layered oxides that use both cation and anion redox for energy storage10.1038/s41578-022-00416-1 ↗
5. Mg-pillared LiCoO2: towards stable cycling at 4.6 V10.1002/anie.202014226 ↗
6. Structural origin of the high-voltage instability of lithium cobalt oxide10.1038/s41565-021-00855-x ↗
7. Selective recycling of valuable metals from waste LiCoO2 cathode material of spent lithium-ion batteries through low-temperature thermochemistry10.1016/j.cej.2022.134542 ↗
8. Improvement of float charge durability for LiCoO2 electrodes under high voltage and storage temperature by suppressing O1-Phase transition10.1016/j.jpowsour.2020.228127 ↗
9. Role of impurity copper in Li-ion battery recycling to LiCoO2 cathode materials10.1016/j.jpowsour.2019.227630 ↗
10. Anisotropic electrical conductivity in LiCoO2 single crystal10.1006/jssc.2001.9459 ↗
11. Facet-dependent thermal instability in LiCoO210.1021/acs.nanolett.6b04502 ↗
12. Tailoring the morphology of LiCoO2: a first principles study10.1021/cm9008943 ↗
13. First-principles and experimental investigation of the morphology of layer-structured LiNiO2 and LiCoO2
14. Achieving stable cycling of LiCoO2 at 4.6 V by multilayer surface modification
15. Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6 V10.1038/s41560-019-0409-z ↗
16. A novel bifunctional self-stabilized strategy enabling 4.6 V LiCoO2 with excellent long-term cyclability and high-rate capability
17. Unveiling nickel chemistry in stabilizing high-voltage cobalt-rich cathodes for lithium-ion batteries
18. Nucleation of dislocations and their dynamics in layered oxide cathode materials during battery charging10.1038/s41560-018-0184-2 ↗
19. Effects of long-term fast charging on a layered cathode for lithium-ion batteries10.1016/j.jechem.2021.10.030 ↗
20. Disordering and electronic state of cobalt ions in mechanochemically synthesized LiCoO210.1006/jssc.2002.9493 ↗
21. Structure and electrochemistry of lithium cobalt oxide synthesised at 400 oC10.1016/0025-5408(92)90062-5 ↗
22. LiCoO2: formation, structure, lithium and oxygen nonstoichiometry, electrochemical behaviour and transport properties10.1016/j.ssi.2004.04.003 ↗
23. Effects of MgO coating on the structural and electrochemical characteristics of LiCoO2 as cathode materials for lithium ion battery10.1021/cm403846a ↗
24. The character of dislocations in LiCoO210.1149/1.1472257 ↗
25. The interplay between thermodynamics and kinetics in the solid-state synthesis of layered oxides10.1038/s41563-020-0688-6 ↗
26. Impact of lithium composition on structural, electronic and optical properties of lithium cobaltite prepared by solid-state reaction10.3329/jsr.v6i2.17900 ↗
27. Synthesis of LiCoO2 particles with uniform size distribution using hydrothermally precipitated Co3O4 fine particles10.1016/S0167-2738(99)00114-9 ↗
28. Evolution of the morphology, structural and thermal stability of LiCoO2 during overcharge10.1016/j.jechem.2020.06.071 ↗
29. Turning down the heat: design and mechanism in solid-state synthesis10.1126/science.259.5101.1558 ↗
30. Grain size regulation for balancing cycle performance and rate capability of LiNi0.9Co0.055Mn0.045O2 single crystal nickel-rich cathode materials10.1016/j.jechem.2021.06.017 ↗
31. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
32. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
33. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
34. First-principles prediction of redox potentials in transition-metal compounds with LDA+U10.1103/PhysRevB.70.235121 ↗
35. Special points for brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
36. First-principles study of low miller index Ni3S2 surfaces in hydrotreating conditions10.1021/jp8072798 ↗
37. Highly-dispersed submicrometer single-crystal nickel-rich layered cathode: spray synthesis and accelerated lithium-ion transport10.1002/smll.202006869 ↗
38. Fabrication of LiCoO2 crystal layers using a flux method and their application for additive-free lithium-ion rechargeable battery cathodes10.1021/cg5000217 ↗
39. Tuning the structure and property of nanostructured cathode materials of lithium ion and lithium sulfur batteries10.1039/C4TA03823A ↗
40. High voltage operation of Ni-rich NMC cathodes enabled by stable electrode/electrolyte interphases10.1002/aenm.201800297 ↗
41. Flakelike LiCoO2 with exposed {010} facets as a stable cathode material for highly reversible lithium storage10.1021/acsami.5b10977 ↗
42. Characterization of nanocrystalline HT- LiCoO2 cathode materials for secondary lithium batteries10.1016/j.electacta.2004.05.052 ↗
43. Structural stability of LiCoO2 at 400 °C10.1006/jssc.2002.9679 ↗
44. In situ growth of layered, spinel, and rock-salt LiCoO2 by laser ablation deposition10.1063/1.357514 ↗
45. Enhanced 4.5 V/55 °C cycling performance of LiCoO2 cathode via LiAlO2-LiCo1-xAlxO2 double-layer coatings10.1016/j.electacta.2018.12.044 ↗
46. Hydrothermal-assisted synthesis of surface aluminum-doped LiCoO2 nanobricks for high-rate lithium-ion batteries10.1016/j.ceramint.2018.05.128 ↗
47. XPS investigation of the electrolyte induced stabilization of LiCoO2 and “AlPO4”-coated LiCoO2 composite electrodes10.1149/2.0851602jes ↗
48. Air-induced degradation and electrochemical regeneration for the performance of layered Ni-rich cathodes10.1021/acsami.9b11452 ↗
49. Acid-corrosion-formed amorphous phosphate surfaces improve electrochemical stability of LiNi0.80Co0.15Al0.05O2 cathodes10.1016/j.corsci.2020.108553 ↗
50. Optimum morphology of mixed-olivine mesocrystals for a Li-ion battery10.1021/acs.inorgchem.8b00501 ↗
51. Performance improvement of LiCoO2 by MgF2 surface modification and mechanism exploration10.1016/j.electacta.2014.04.155 ↗
52. Characterization of spinel LixCo2O4-coated LiCoO2 prepared with post-thermal treatment as a cathode material for lithium ion batteries10.1021/acs.chemmater.5b00159 ↗
53. Persistent and partially mobile oxygen vacancies in Li-rich layered oxides10.1038/s41560-021-00832-7 ↗
54. Single-crystal alpha-Fe2O3 with engineered exposed (001) facet for high-rate, long-cycle-life lithium-ion battery anode10.1021/acs.inorgchem.9b01626 ↗
55. Synthesis and properties of CoO2, the x = 0 end member of the LixCoO2 and NaxCoO2 systems10.1021/cm0702464 ↗
56. Strain engineering of layered heterogeneous structure via self-evolution confinement for ultrahigh-rate cyclic sodium storage
57. Anchoring interfacial nickel cations on single-crystal LiNi0.8Co0.1Mn0.1O2 cathode surface via controllable electron transfer10.1021/acsenergylett.0c01032 ↗
58. MnPO4-coated Li(Ni0.4Co0.2Mn0.4)O2 for lithium(-ion) batteries with outstanding cycling stability and enhanced lithiation kinetics
59. Insights on the activation and stabilization of NCA cathode interface: surface chemical state modulations of aluminum-mediated Li0.73CoO2 coatings10.1021/acssuschemeng.0c05229 ↗
60. Tungsten doping for stabilization of Li[Ni0.90Co0.05Mn0.05]O2 cathode for Li-ion battery at high voltage10.1016/j.jpowsour.2019.227242 ↗
61. Ameliorating the interfacial problems of cathode and solid-state electrolytes by interface modification of functional polymers10.1002/aenm.201801528 ↗
62. Enhancing high-temperature and high-voltage performances of single-crystal LiNi0.5Co0.2Mn0.3O2 cathodes through a LiBO2/LiAlO2 dual-modification strategy10.1021/acssuschemeng.9b07792 ↗
63. Microstructure-controlled Ni-rich cathode material by microscale compositional partition for next-generation electric vehicles