Newly developed γ-NaTiOPO4 by simple solid-state synthesis for anode material of Na-ion batteries in both nonaqueous and aqueous electrolytes
Source abstract
Abstract
Sodium-ion batteries (SIBs) are a promising next-generation energy storage system in terms of cost due to the abundance of sodium. However, obtaining good anode materials for SIBs remains a challenge. NaTiOPO 4 has been investigated as an anode not only for SIBs but also for aqueous SIBs. Despite the various NaTiOPO 4 polymorphs, only the β-NaTiOPO 4 phase has been investigated as an anode for SIBs due to the limited synthesis process. In this study, we successfully stabilized γ-NaTiOPO 4 via our newly developed solid-state synthesis process. In addition, its electrochemical properties as an anode for SIBs were investigated in this study. The synthesized material demonstrates a high voltage of 1.7 and ∼1.5 V vs Na/Na + with 120 mAh/g and good capacity retention of 64% for up to 500 cycles at 0.5C in a nonaqueous electrolyte. In an aqueous electrolyte, Na 0 · 44MnO 2//γ-NaTiOPO 4 full cell achieves excellent stable capacity retention with a high Coulombic efficiency for 175 cycles. It shows high cycling stability with a three-dimensional framework despite the relatively high redox potential. Thus, it demonstrates that γ-NaTiOPO 4 is a promising anode material for both nonaqueous and aqueous rechargeable SIBs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. The 2021 battery technology roadmap10.1088/1361-6463/abd353 ↗
2. Rapidly falling costs of battery packs for electric vehicles10.1038/nclimate2564 ↗
3. Future material demand for automotive lithium-based batteries10.1038/s43246-020-00095-x ↗
4. Exploits, advances and challenges benefiting beyond Li-ion battery technologies
5. Research development on sodium-ion batteries10.1021/cr500192f ↗
6. Aqueous rechargeable Li and Na ion batteries10.1021/cr500232y ↗
7. Kirby · 2019
8. Sodium intercalation chemistry in graphite10.1039/C5EE02051D ↗
9. Tailoring sodium intercalation in graphite for high energy and power sodium ion batteries
10. Sodium-based batteries: in search of the best compromise between sustainability and maximization of electric performance10.3389/fenrg.2020.605129 ↗
11. Advances and challenges of sodium ion batteries as post lithium ion batteries10.1039/C5RA08321D ↗
12. Na2Ti3O7: lowest voltage ever reported oxide insertion electrode for sodium ion batteries10.1021/cm202076g ↗
13. A zero-strain layered metal oxide as the negative electrode for long-life sodium-ion batteries
14. Electrochemical properties of NaTi2(PO4)(3) anode for rechargeable aqueous sodium-ion batteries10.1149/1.3611434 ↗
15. Pressure induced gamma ->alpha-NaTiOPO4 phase transition10.1016/j.jallcom.2004.10.012 ↗
16. High-voltage aqueous Na-ion battery enabled by inert-cation-assisted water-in-salt electrolyte10.1002/adma.201904427 ↗
17. Electric properties of KTiOPO4 and NaTiOPO4 from temperature-dependent X-ray diffraction10.1107/S002188989800497X ↗
18. Growth and properties of crystals in the system KTiOPO4-NaTiOPO410.1016/0022-0248(94)90460-X ↗
19. Novel 1.5 V anode materials, ATiOPO(4) (A = NH4, K, Na), for room -temperature sodium-ion batteries10.1039/C6TA00891G ↗
20. Investigation of NaTiOPO4 as anode for sodium-ion batteries: a solid electrolyte interphase free material?10.1021/acsaem.8b02040 ↗
21. Direct evidence of concurrent solid-solution and two-phase reactions and the nonequilibrium structural evolution of LiFePO410.1021/ja301187u ↗
22. Isolation of solid solution phases in size-controlled LixFePO4 at room temperature10.1002/adfm.200801522 ↗
23. High energy density polyanion electrode material: LiVPO4O1–xFx (x ≈ 0.25) with tavorite structure10.1021/acs.chemmater.7b00124 ↗