Tailoring the surface energy and area surface resistance of solid-electrolyte polymer membrane for dendrite free, high-performance, and safe solid-state Li-batteries
Source abstract
Abstract
Solid electrolyte polymer composite enabled solid-state lithium batteries have shown extensive viability for mass production and commerciality for advanced energy storage technology. Most studies of polymer composite electrolyte are produced by solution casting and free-standing methods, where ionic conductors are randomly distributed into the polymeric network, suffering from poor ionic conductivity and agglomeration during charge/discharge cycling. In this work, using the threshold percolation model and critical volume fraction requirement, we have designed a highly efficient garnet-type ion-conducting nanofibrous sheet where ionic conductors of different aspect ratios are dispersed to tune the surface roughness, area surface resistance, and wettability of the developed electrolyte membrane. Moreover, the impact of filler volume fraction and percolation threshold on the surface properties of the membrane, regulating the area interfacial resistance of the Li metal cell has also been examined, which has not been studied so far in the literature. The corresponding high potential cathode-based lithium assembled coin cells exhibit an excellent specific capacity of 170 mAh g −1 at 0.3C, with high capacity retention under ambient circumstances. By optimizing the critical aspect ratio of the fillers and the percolation threshold, a high-performing solid electrolyte membrane can be realized for advanced and safer Li-batteries technology.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Tailoring electrolyte solvation for Li metal batteries cycled at ultra-low temperature10.1038/s41560-021-00783-z ↗
2. Materials for lithium-ion battery safety10.1126/sciadv.aas9820 ↗
3. Electrolytes and interphases in Li-ion batteries and beyond10.1021/cr500003w ↗
4. Protected lithium-metal anodes in batteries: from liquid to solid
5. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries10.1038/s41560-017-0047-2 ↗
6. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
7. Recent advances in all-solid-state rechargeable lithium batteries10.1016/j.nanoen.2017.01.028 ↗
8. Understanding the lithium dendrites growth in garnet-based solid-state lithium metal batteries10.1016/j.jpowsour.2021.230921 ↗
9. Fundamentals of inorganic solid-state electrolytes for batteries10.1038/s41563-019-0431-3 ↗
10. Promises, challenges, and recent progress of inorganic solid-state electrolytes for all-solid-state lithium batteries
11. Unlocking the failure mechanism of solid state lithium metal batteries
12. Interfaces and interphases in all-solid-state batteries with inorganic solid electrolytes10.1021/acs.chemrev.0c00101 ↗
13. Solid‐state Li–metal batteries: challenges and horizons of oxide and sulfide solid electrolytes and their interfaces
14. A stretchable and safe polymer electrolyte with a protecting-layer strategy for solid-state lithium metal batteries
15. Designing 3D nanostructured garnet frameworks for enhancing ionic conductivity and flexibility in composite polymer electrolytes for lithium batteries10.1016/j.ensm.2018.03.016 ↗
16. Progress and perspective of ceramic/polymer composite solid electrolytes for lithium batteries
17. Advances in composite polymer electrolytes for lithium batteries and beyond
18. High performance composite polymer electrolytes for lithium-ion batteries10.1002/adfm.202101380 ↗
19. A review of composite polymer-ceramic electrolytes for lithium batteries10.1016/j.ensm.2020.10.006 ↗
20. The critical role of inorganic nanofillers in solid polymer composite electrolyte for Li+ transportation10.1002/cey2.108 ↗
21. Recent advances in filler engineering of polymer electrolytes for solid-state Li-ion batteries: a review10.1021/acs.energyfuels.0c02111 ↗
22. Influence of particle size ratio on the continuity of aggregates10.1063/1.323560 ↗
23. Influence of particle size on the electrical resistivity of compacted mixtures of polymeric and metallic powders10.1063/1.1660071 ↗
24. Electrical properties of polymer nanocomposites containing rod-like nanofillers10.1016/j.progpolymsci.2014.06.002 ↗
25. Nonflammable hybrid solid electrolyte membrane for a solid-state lithium battery compatible with conventional porous electrodes10.1016/j.memsci.2020.117820 ↗
26. A dopamine modified Li6.4La3Zr1.4Ta0.6O12/PEO solid-state electrolyte: enhanced thermal and electrochemical properties
27. Ionic liquid-immobilized polymer gel electrolyte with self-healing capability, high ionic conductivity and heat resistance for dendrite-free lithium metal batteries10.1016/j.nanoen.2018.09.059 ↗
28. Modified solid-electrolyte interphase toward stable Li metal anode10.1016/j.nanoen.2020.105308 ↗
29. A review on the thermal hazards of the lithium-ion battery and the corresponding countermeasures10.3390/app9122483 ↗
30. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review10.1016/j.ensm.2017.05.013 ↗
31. Propylene carbonate-nitrile solvent blends for thermally stable gel polymer lithium ion battery electrolytes10.1016/j.jpowsour.2020.229047 ↗
32. Thermally stable and nonflammable electrolytes for lithium metal batteries: progress and perspectives10.1002/smsc.202170025 ↗
33. Thermal safety and performances analysis of gel polymer electrolytes synthesized by in situ polymerization for Li-ion battery10.1007/s10008-021-04965-3 ↗
34. Safer lithium-ion batteries from the separator aspect: development and future perspectives10.1002/eem2.12129 ↗
35. Design principles of the anode–electrolyte interface for all solid‐state lithium metal batteries10.1002/smtd.201900592 ↗
36. Efficient Li‐Ion‐Conductive layer for the realization of highly stable high‐voltage and high‐capacity lithium metal batteries10.1002/aenm.201803722 ↗
37. Morphological, dielectric and transport properties of garnet-type Li6.25+yAl0.25La3Zr2-yMnyO12 (y = 0, 0.05, 0.1, and 0.2)10.1016/j.ssi.2020.115339 ↗
38. Improved lithium ionic conductivity in composite polymer electrolytes with oxide-ion conducting nanowires10.1021/acsnano.6b06797 ↗
39. Evaluation on dispersion behavior of the aqueous copper nano-suspensions10.1016/j.jcis.2007.02.067 ↗
40. Characterization of size, surface charge, and agglomeration state of nanoparticle dispersions for toxicological studies10.1007/s11051-008-9446-4 ↗
41. Study on the surface energy of graphene by contact angle measurements10.1021/la5018328 ↗
42. Analysis of different approaches for evaluation of surface energy of microbial cells by contact angle goniometry10.1016/S0001-8686(02)00004-0 ↗
43. Electrical double percolation of polybutadiene/polyethylene glycol blends loaded with conducting polymer nanofibers10.3390/polym12112658 ↗
44. Insights to low electrical percolation thresholds of carbon-based polypropylene nanocomposites10.1016/j.carbon.2021.01.158 ↗
45. Pre-treatments of lithium foil surface for improving the cycling life of Li metal batteries10.3389/fmats.2019.00267 ↗
46. Efficient Li-metal plating/stripping in carbonate electrolytes using a LiNO3-gel polymer electrolyte, monitored by operando neutron depth profiling10.1021/acs.chemmater.9b01325 ↗
47. Overcoming the interfacial limitations imposed by the solid–solid interface in solid-state batteries using ionic liquid‐based interlayers
48. Extended electrochemical window of solid electrolytes via heterogeneous multilayered structure for high-voltage lithium metal batteries10.1002/adma.201807789 ↗
49. Enhancement of ionic conductivity of composite membranes for all-solid-state lithium rechargeable batteries incorporating tetragonal Li7La3Zr2O12 into a polyethylene oxide matrix10.1016/j.jpowsour.2014.10.078 ↗
50. An anion-immobilized composite electrolyte for dendrite-free lithium metal anodes10.1073/pnas.1708489114 ↗
51. Morphosynthesis of 3D macroporous garnet frameworks and perfusion of polymer-stabilized lithium salts for flexible solid-state hybrid electrolytes
52. Differentiated lithium salt design for multilayered PEO electrolyte enables a high‐voltage solid‐state lithium metal battery10.1002/advs.201901036 ↗
53. Porous film host-derived 3D composite polymer electrolyte for high-voltage solid state lithium batteries10.1016/j.ensm.2020.01.006 ↗
54. Flexible, mechanically robust, solid-state electrolyte membrane with conducting oxide-enhanced 3D nanofiber networks for lithium batteries10.1021/acs.nanolett.1c01704 ↗
55. Li7La3Zr2O12 ceramic nanofiber-incorporated solid polymer electrolytes for flexible lithium batteries10.1021/acsaem.0c00070 ↗
56. Uniform and anisotropic solid electrolyte membrane enables superior solid-state Li metal batteries10.1002/advs.202100899 ↗
57. Li0.35La0.55TiO3 nanofibers enhanced poly(vinylidene fluoride)-based composite polymer electrolytes for all-solid-state batteries
58. Lithium Nafion−Modified Li6.05Ga0.25La3Zr2O11.8F0.2 trilayer hybrid solid electrolyte for high-voltage cathodes in all-solid-state lithium-metal batteries10.1021/acsami.2c00753 ↗
59. Hierarchical interconnected hybrid solid electrolyte membrane for all-solid-state lithium-metal batteries based on high-voltage NCM811 cathodes10.1021/acsaem.2c00046 ↗
60. Freestanding trilayer hybrid solid electrolyte with electrospun interconnected Al-LLZO nanofibers for solid-state lithium-metal batteries10.1021/acsaem.1c03202 ↗
61. Y. K. Sharma, B. P. Dubey, A. Sahoo (Indian Institute of technology, roorkee), The Patent Office Journal No. 11/2021, 12719, Application No. 202011051145 A.