journal article·2022-05Open access

A coupled electrochemomechanical model for the cycling of a Cu15Si4-hosted silicon nanowire

K.M. Devine, D. O’Kiely, M. Vynnycky, F. Silveri, A. Tommasi, S. Abinaya, H. Geaney, K.M. Ryan

Abstract

In this paper, we present and analyse a coupled electrochemomechanical model for the cycling of a nanowire composed of amorphous Si coated on Cu15Si4, using large-deformation theory. This study is motivated by a recent novel design for the anode current collector in a lithium-ion battery, and the modelling efforts are linked to half-cell experiments at three different charging rates (C/10,C/2,2C). The model predicts that nanowire buckling should occur on the first charging cycle, and this agrees with the appearance of fracturing on the corresponding transmission electron microscopy image. In addition, the model predicts some new behaviours that were not discussed in earlier electrochemomechanical models of similar type; among these is the possibility that the electrode may locally reach full charge first in its interior, rather than at its outer surface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Semiconductor materials and interfaces · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Copper silicide nanowires as hosts for amorphous Si deposition as a route to produce high capacity lithium-ion battery anodes10.1021/acs.nanolett.9b03664 ↗
2. Influence of constraints on axial growth reduction of cylindrical Li-ion battery electrode particles10.1016/j.jpowsour.2015.01.067 ↗
3. Combining mechanical and chemical effects in the deformation and failure of a cylindrical electrode particle in a Li-ion battery10.1016/j.ijsolstr.2014.11.006 ↗
4. Large deformation analysis of diffusion-induced buckling of nanowires in lithium-ion batteries10.1016/j.ijsolstr.2016.12.020 ↗
5. Effect of local velocity on diffusion-induced stress in large-deformation electrodes of lithium-ion batteries10.1016/j.jpowsour.2016.04.056 ↗
6. Lithiation-induced buckling of wire-based electrodes in lithium-ion batteries: a phase-field model coupled with large deformation10.1016/j.ijsolstr.2018.05.014 ↗
7. A review on modeling of electro-chemo-mechanics in lithium-ion batteries10.1016/j.jpowsour.2018.12.011 ↗
8. Analysis of lithium ion concentration and stress in the solid electrolyte interphase on the graphite anode10.1039/C5CP02893K ↗
9. Modeling mechanical degradation in lithium ion batteries during cycling: Solid electrolyte interphase fracture10.1016/j.jpowsour.2015.09.033 ↗
10. Modeling solid-electrolyte interphase (SEI) fracture: Coupled mechanical/chemical degradation of the lithium ion battery10.1149/2.0841702jes ↗
11. Modeling fracture of solid electrolyte interphase in lithium-ion batteries during cycling10.1007/s10008-019-04402-6 ↗
12. Shear-lag model of diffusion-induced buckling of core-shell nanowires10.1088/0022-3727/49/28/285602 ↗
13. Rate-dependent plastic buckling of a core-shell wire10.1088/1361-6463/ab34a4 ↗
14. Buckling behavior of a wire-like electrode with a concentration-dependent elastic modulus based on a deformed configuration10.1016/j.euromechsol.2020.104111 ↗
15. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
16. Derivation of an effective thermal electrochemical model for porous electrode batteries using asymptotic homogenisation10.1007/s10665-020-10045-8 ↗
17. Asymptotic reduction of a porous electrode model for lithium-ion batteries10.1137/18M1189579 ↗
18. Size-dependent effects sensitively determine buckling of a cylindrical silicon electrode particle in a lithium-ion battery10.1063/1.5052236 ↗
19. Mechano-electrochemical and buckling analysis of composition-gradient nanowires electrodes in lithium-ion battery10.1007/s00707-019-02486-9 ↗
20. Rate-dependent lithiation-induced failure modes of a cylindrical core-shell electrode10.1016/j.rinp.2020.103018 ↗
21. Nonlinear correction to the Euler buckling formula for compressed cylinders with guided-guided end conditions10.1007/s10659-010-9265-6 ↗
22. Modeling the delamination of amorphous-silicon thin film anode for lithium-ion battery10.1016/j.jpowsour.2013.06.089 ↗
23. Large plastic deformation in high-capacity lithium-ion batteries caused by charge and discharge10.1111/j.1551-2916.2011.04432.x ↗
24. Gere · 2009
25. https://www.quantum-espresso.org/.
26. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
27. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
28. Commentary: The materials project: A materials genome approach to accelerating materials innovation10.1063/1.4812323 ↗
29. A Broyden-Fletcher-Goldfarb-Shanno optimization procedure for molecular geometries10.1016/0009-2614(85)80574-1 ↗
30. A. Dal Corso, Thermo_PW, https://dalcorso.github.io/thermo_pw/.
31. A simple explicit formula for the Voigt-Reuss-Hill average of elastic polycrystals with arbitrary crystal and texture symmetries10.1007/s10659-011-9312-y ↗
32. Roper · 2019
33. On veracity of macroscopic lithium-ion battery models10.1149/2.0771509jes ↗
34. Modeling of galvanostatic charge and discharge of the lithium polymer insertion cell10.1149/1.2221597 ↗
35. Colossal reversible volume changes in lithium alloys10.1149/1.1388178 ↗
36. Volume expansion during lithiation of amorphous silicon thin film electrodes studied by in-operando neutron reflectometry10.1021/jp502261t ↗
37. Effect of temperature on silicon-based anodes for lithium-ion batteries10.1016/j.jpowsour.2019.227080 ↗
38. Structural changes in silicon anodes during lithium insertion/extraction10.1149/1.1652421 ↗
39. Li-Si phase diagram: Enthalpy of mixing, thermodynamic stability, and coherent assessment10.1016/j.jallcom.2014.06.212 ↗
40. Development and application of phase diagrams for Li-ion batteries using CALPHAD approach10.1016/j.pnsc.2019.05.007 ↗