journal article·2021-11

A completely sealed high temperature carbon-air battery with carbon dioxide absorber

Mingyang Zhou, Qian Zhou, Qianyuan Qiu, Wei Wang, Jiang Liu

Publisher page

Abstract

Abstract A completely sealed high temperature carbon-air battery is proposed and prepared using a tubular oxygen-ion-conducting yttrium stabilized zirconia electrolyte with anode inside and cathode outside. CaO and carbon powders, with a molar ratio of 0.5, 0.75, and 1.0, are respectively loaded in the anode chamber, in two ways: One is mixing CaO and C together (mixing mode) and the other is loading them one by one (separating mode). The electrochemical output performance and discharging time of the batteries increase with decreasing CaO/C ratio. Thermodynamic calculation results show that the pressure of the anode chamber of a battery increases with more carbon oxidized. CO2 produced through the electrochemical oxidation of carbon can be absorbed by CaO to produce CaCO3, resulting in relieve of pressure. However, insufficient CO2 for maintaining the operation of battery is also caused by CaO. This evidence may be mitigated by loading C and CaO separately to avoid immediate reaction between CO2 and CaO. A carbon-air battery with 0.25 g carbon powder separately loaded with CaO in a CaO/C ratio of 0.5 discharges at 200 mA for 6.9 h, giving a practical specific energy density of 1300 Wh kg−1, considering the mass of both C and CaO.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Advanced battery technologies research · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Ceramic fuel cell
2. A direct-methane fuel cell with a ceria-based anode10.1038/23220 ↗
3. Direct oxidation of hydrocarbons in a solid-oxide fuel cell10.1038/35005040 ↗
4. Carbon monoxide-fueled solid oxide fuel cell10.1016/j.jpowsour.2010.04.020 ↗
5. Metal-air batteries: from oxygen reduction electrochemistry to cathode catalysts10.1039/c1cs15228a ↗
6. Li-O2 and Li-S batteries with high energy storage10.1038/nmat3191 ↗
7. Metal-air batteries with high energy density: Li-air versus Zn-air10.1002/aenm.201000010 ↗
8. Flexible Zn– and Li–air batteries: recent advances, challenges, and future perspectives10.1039/C7EE01913K ↗
9. An all-solid-state carbon-air battery reaching an output power over 10 W and a specific energy of 3600 Wh kg-110.1016/j.cej.2020.127057 ↗
10. A compact and seal-less direct carbon solid oxide fuel cell stack stepping into practical application10.1016/j.apenergy.2020.115657 ↗
11. Metal–air batteries: will they be the future electrochemical energy storage device of choice?10.1021/acsenergylett.7b00119 ↗
12. Electrochemical oxidation of carbon at high temperature: principles and applications10.1021/acs.energyfuels.7b03164 ↗
13. Review of fuels for direct carbon fuel cells10.1021/ef201694y ↗
14. Critical review of carbon conversion in "carbon fuel cells10.1021/cr400072b ↗
15. Recent advances in high-temperature carbon–air fuel cells, Energ
16. Direct carbon fuel cell: fundamentals and recent developments10.1016/j.jpowsour.2007.02.034 ↗
17. Reaction order and activation energy of carbon oxidation during internal burning10.1016/S0082-0784(79)80020-X ↗
18. Carbon–air fuel cell without a reforming process10.1016/j.carbon.2004.03.036 ↗
19. Direct conversion of carbon fuels in a molten carbonate fuel cell10.1149/1.1836129 ↗
20. The role of carbon in fuel cells10.1016/j.jpowsour.2006.02.054 ↗
21. Influence of temperature and composition of NaOH–KOH and NaOH–LiOH electrolytes on the performance of a direct carbon fuel cell10.1016/j.jpowsour.2013.03.159 ↗
22. Performance of an internal direct-oxidation carbon fuel cell and its evaluation by graphic energy analysis10.1021/ie00079a016 ↗
23. Direct carbon conversion in a helium fluidized bed fuel cell10.1016/j.ssi.2007.11.006 ↗
24. A novel direct carbon solid oxide fuel cell10.1149/1.3205638 ↗
25. A new carbon fuel cell with high power output by integrating with in situ catalytic reverse Boudouard reaction10.1016/j.elecom.2009.04.016 ↗
26. Electrochemical oxidation of solid carbon in hybrid DCFC with solid oxide and molten carbonate binary electrolyte10.1039/b804785e ↗
27. A direct carbon fuel cell with a molten antimony anode10.1039/c1ee01863a ↗
28. A direct carbon fuel cell with (molten carbonate)/(doped ceria) composite electrolyte10.1016/j.jpowsour.2010.03.016 ↗
29. A comparative study of different carbon fuels in an electrolyte-supported hybrid direct carbon fuel cell10.1016/j.apenergy.2013.03.053 ↗
30. A verification of the reaction mechanism of direct carbon solid oxide fuel cells10.1007/s10008-012-1866-5 ↗
31. A carbon-air battery for high power generation10.1002/anie.201411039 ↗
32. Dip coating technique in fabrication of cone-shaped anode-supported solid oxide fuel cells10.1016/j.jallcom.2009.01.089 ↗
33. Electrochemical gas–electricity cogeneration through direct carbon solid oxide fuel cells10.1016/j.jpowsour.2014.12.016 ↗
34. Effect of anode and Boudouard reaction catalysts on the performance of direct carbon solid oxide fuel cells10.1016/j.ijhydene.2010.07.068 ↗
35. A rapid method for sealing solid oxide fuel cells using metal conducting glue
36. A high-performance intermediate-to-low temperature protonic ceramic fuel cell with in-situ exsolved nickel nanoparticles in the anode10.1016/j.ceramint.2020.05.062 ↗
37. A high performance direct carbon solid oxide fuel cell fueled by Ca-loaded activated carbon10.1016/j.ijhydene.2017.03.229 ↗
38. Nanomaterials for rechargeable lithium batteries10.1002/anie.200702505 ↗