journal article·2021-08

Bi-functional modular graphene network with high rate and cycling performance

Junwei Sha, Xiaoyu Chu, Tingting Xu, Yue Li, Yu Tang, Liying Ma, Chunsheng Shi, Enzuo Liu, Dongdong Zhao, Chunnian He, Naiqin Zhao

Publisher page

Abstract

Abstract Three-dimensional bi-functional modular graphene network (3D bmG) is developed by using metal powder assisted soluble salt templates method. The 3D bmG contains two kinds of modules with different functions: the 3D graphene catalyzed by Ni powder (3D bmG-n) and the 3D graphene grown on NaCl crystals (3D bmG-s). The 3D bmG-n with high crystallization degree ensures the high electrical conductivity and structural stability and protects the 3D bmG-s from etching in electrolyte. The 3D bmG-s with more defects and pores provides high capacity and rate properties. Thus, the synergistic effects of the two modules endow the 3D bmG excellent electrochemical performance as both cathode and anode of lithium-ion capacitors (LICs). The as-prepared “all-carbon” bmG//bmG full LIC with a high voltage window of 4.5 V presents high energy densities of 278 Wh kg−1 and 52.2 Wh kg−1 at power densities of 405 W kg−1 and 16200 W kg−1, respectively, and excellent cycling stability with a capacity retention ratio of 88.57% after 3000 cycles, which is superior compared with LICs reported previously. These properties indicate promising application of 3D bmG in high performance energy storage devices, and the modular design in this work will inspire more designs and types of 3D materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Graphene research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions10.1016/S0167-2738(02)00080-2 ↗
2. Electrochemical investigations of lithium-aluminum alloy anode in Li/polymer cells10.1016/S0378-7753(00)00522-X ↗
3. An advanced hybrid electrochemical capacitor that uses a wide potential range at the positive electrode10.1149/1.2349495 ↗
4. High-energy-density hybrid electrochemical capacitor using graphitizable carbon activated with KOH for positive electrode10.1016/j.jpowsour.2007.01.037 ↗
5. Analyses of capacity loss and improvement of cycle performance for a high-voltage hybrid electrochemical capacitor10.1149/1.2746562 ↗
6. An asymmetric hybrid nonaqueous energy storage cell10.1149/1.1383553 ↗
7. Improvement in cycle performance of a high-voltage hybrid electrochemical capacitor10.1149/1.2435511 ↗
8. Electrode materials, electrolytes, and challenges in nonaqueous lithium-ion capacitors
9. Lithium ion capacitors in organic electrolyte system: scientific problems, material development, and key technologies10.1002/aenm.201801243 ↗
10. A high-energy lithium-ion capacitor by integration of a 3D interconnected titanium carbide nanoparticle chain anode with a pyridine-derived porous nitrogen-doped carbon cathode10.1002/adfm.201505240 ↗
11. Toward high energy-density and long cycling-lifespan lithium ion capacitors: a 3D carbon modified low-potential Li2TiSiO5 anode coupled with a lignin-derived activated carbon cathode10.1039/C8TA12000E ↗
12. In-situ encapsulation of pseudocapacitive Li2TiSiO5 nanoparticles into fibrous carbon framework for ultrafast and stable lithium storage
13. Lithium batteries with nearly maximum metal storage10.1021/acsnano.7b02731 ↗
14. Graphene/single-walled carbon nanotube hybrids: one-step catalytic growth and applications for high-rate Li-S batteries10.1021/nn304037d ↗
15. Atomic layer-deposited molybdenum oxide/carbon nanotube hybrid electrodes: the influence of crystal structure on lithium-ion capacitor performance10.1021/acsami.8b03233 ↗
16. A high-performance lithium-ion capacitor with carbonized NiCo2O4 anode and vertically-aligned carbon nanoflakes cathode10.1016/j.ensm.2019.07.034 ↗
17. Transparent, flexible conducting hybrid multi layer thin films of multiwalled carbon nanotubes with graphene nanosheets10.1021/nn100897g ↗
18. Nitrogen and phosphorus dual-doped multilayer graphene as universal anode for full carbon-based lithium and potassium ion capacitors10.1007/s40820-019-0260-6 ↗
19. High-energy density Li-ion capacitor with layered SnS2/reduced graphene oxide anode and BCN nanosheet cathode10.1002/aenm.201902836 ↗
20. The effect of crystallinity on the rapid pseudocapacitive response of Nb2O510.1002/aenm.201100494 ↗
21. 3D graphene foams cross-linked with pre-encapsulated Fe3O4Nanospheres for enhanced lithium storage10.1002/adma.201300445 ↗
22. Three-dimensional graphene foam supported Fe3O4 lithium battery anodes with long cycle life and high rate capability10.1021/nl403461n ↗
23. Boosting the lithium and sodium storage performance of graphene-based composite via pore engineering and surface protection10.1088/1361-6528/abce2f ↗
24. Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries10.1021/nl800957b ↗
25. Hybrid lithium-ion capacitors with asymmetric graphene electrodes10.1039/C7TA01113J ↗
26. Porous mesocarbon microbeads with graphitic shells: constructing a high-rate, high-capacity cathode for hybrid supercapacitor10.1038/srep02477 ↗
27. Lightweight multi-walled carbon nanotube/N-doped graphene aerogel composite for high-performance lithium-ion capacitors10.1149/2.0251904jes ↗
28. Mesh-like carbon nanosheets with high-level nitrogen doping for high-energy dual-carbon lithium-ion capacitors
29. Graphene networks anchored with Sn@graphene as lithium ion battery anode10.1021/nn406105n ↗
30. Three-dimensional rebar graphene10.1021/acsami.6b12503 ↗
31. Preparation of three-dimensional graphene foams using powder metallurgy templates10.1021/acsnano.5b06857 ↗
32. Facile Synthesis of graphene nanosheets via Fe reduction of exfoliated graphite oxide10.1021/nn102339t ↗
33. Synthesis of graphene oxide nanosheets by electrochemical exfoliation of graphite in cetyltrimethylammonium bromide and its application for oxygen reduction10.1039/C4TA03026E ↗
34. Graphitic carbon balanced between high plateau capacity and high rate capability for lithium ion capacitors10.1039/C7TA03862C ↗
35. Modified graphite and graphene electrodes for high-performance lithium ion hybrid capacitors
36. Natural sisal fibers derived hierarchical porous activated carbon as capacitive material in lithium ion capacitor10.1016/j.jpowsour.2016.08.088 ↗
37. Electrochemical performance of hybrid supercapacitor fabricated using multi-structured activated carbon10.1016/j.elecom.2014.07.012 ↗
38. Pre-lithiated graphene nanosheets as negative electrode materials for Li-ion capacitors with high power and energy density10.1016/j.jpowsour.2014.04.076 ↗
39. High performance lithium-ion hybrid capacitors with pre-lithiated hard carbon anodes and bifunctional cathode electrodes10.1016/j.jpowsour.2014.07.146 ↗
40. Nitrogen-doped activated carbon for A high energy hybrid supercapacitor10.1039/C5EE03149D ↗