journal article·2021-06Open access

Direct coupling of a high temperature proton exchange membrane fuel cell with hydrogen produced by catalytic partial dehydrogenation of a gasoline-ethanol blend (E10)

Rafael Garcia Garrido, Mélanie Taillades-Jacquin, Gilles Taillades, Frédéric Lecoeur, Nicolas Donzel, Marc Dupont, Julian Dailly, Marion Scohy, Jacques Rozière, Deborah J. Jones

Abstract

The on-board partial dehydrogenation of gasoline to generate hydrogen of sufficient purity to feed a fuel cell directly requires catalysts producing high purity hydrogen at high rate, while also preserving the defining density and boiling point properties of gasoline to allow its recycle to the fuel tank. Here, hydrogen of purity >98% is produced by the catalytic partial dehydrogenation of gasoline SP95E10 (containing 10% ethanol) with a productivity of 2300 NL·h−1·kgcat−1 using a Pt–Sn–In/alumina catalyst prepared by templating and incipient wetness impregnation. The hydrogen is used to feed a high temperature proton exchange membrane fuel cell. The difference in performance between the fuel cell fed with pure hydrogen and with hydrogen generated from gasoline reaches only 13 mV at 200 mA cm−2 at 160 °C, and the loss is completely recovered when the anode gas stream is reverted to pure hydrogen. Such reversible performance loss is attributable to the presence of carbon monoxide that is formed from oxygenated hydrocarbons during the partial dehydrogenation reaction. The depleted gasoline retains its physical properties and presents significantly lower sulfur content, opening prospects for power generation on-board a vehicle with a fuel cell using hydrogen produced on demand from its primary fuel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Fuel Cells and Related Materials · Hybrid Renewable Energy Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Fuel cell systems with reforming of petroleum- based and synthetic-based diesel and kerosene fuels for APU applications10.1016/j.ijhydene.2015.03.091 ↗
2. Overview of the next quarter century vision of hydrogen fuel cell electric vehicles10.1016/j.ijhydene.2018.10.112 ↗
3. Analysis of the control strategies for fuel saving in the hydrogen fuel cell vehicles10.1016/j.ijhydene.2017.12.150 ↗
4. Recent challenges of hydrogen storage technologies for fuel cell vehicles10.1016/j.ijhydene.2008.07.115 ↗
5. On-board generation of hydrogen to improve in-cylinder combustion and after-treatment efficiency and emissions performance of a hybrid hydrogen-gasoline engine10.1016/j.ijhydene.2018.12.164 ↗
6. Ni-Cu/Al2O3 catalysts for gasoline reforming to produce hydrogen applied in spark ignition engines10.3390/catal6030045 ↗
7. Fabiano · 2016 · vol. 41 · 19475
8. A diesel fuel processor for fuel-cell-based auxiliary power unit applications10.1016/j.jpowsour.2017.04.056 ↗
9. An autothermal reforming system for diesel and jet fuel with quick start-up capability10.1016/j.ijhydene.2019.08.244 ↗
10. Heat integration of methanol steam reformer with a high-temperature polymeric electrolyte membrane fuel cell10.1016/j.energy.2016.11.101 ↗
11. Design, fabrication and performance evaluation of an integrated reformed methanol fuel cell for portable use10.1016/j.jpowsour.2018.04.009 ↗
12. Integration of high temperature PEM fuel cells with a methanol reformer10.1016/j.jpowsour.2005.02.056 ↗
13. Heat and fuel coupled operation of a high temperature polymer electrolyte fuel cell with a heat exchanger methanol steam reformer10.1016/j.jpowsour.2017.02.021 ↗
14. Hydrogen production by partial oxidation of ethanol/gasoline blends over Rh/Al2O310.1016/j.cattod.2012.06.032 ↗
15. A future energy supply based on Liquid Organic Hydrogen Carriers (LOHC)10.1039/c1ee01454d ↗
16. High-purity hydrogen generation via dehydrogenation of organic Carriers : a review on the catalytic process10.1021/acscatal.7b04278 ↗
17. Hydrogen generation via catalytic partial dehydrogenation of gasoline and diesel fuels10.1016/j.apcatb.2015.12.015 ↗
18. Hydrogen generation by catalytic partial dehydrogenation of low-sulfur fractions produced from kerosene Jet A-110.1016/j.apcatb.2015.04.018 ↗
19. Study of the effect of addition of in to Pt-Sn/γ-Al2O3 catalysts for high purity hydrogen production via partial dehydrogenation of kerosene jet A-110.1016/j.apcatb.2014.06.003 ↗
20. Environmental Effect of the nature of the support on the activity of Pt-Sn based catalysts for hydrogen production by dehydrogenation of Ultra Low Sulfur Kerosene Jet A-110.1016/j.apcatb.2013.02.037 ↗
21. High purity hydrogen from catalytic partial dehydrogenation of kerosene using saccharide-templated mesoporous alumina supported Pt-Sn10.1016/j.cattod.2013.01.007 ↗
22. On-board H2 generation by catalytic dehydrogenation of hydrocarbon mixtures or fuels, Catal10.1016/j.cattod.2011.02.056 ↗
23. Pt–Sn γ-Al2O3 and Pt–Sn–Na γ-Al2O3 catalysts for hydrogen production by dehydrogenation of Jet A-1 fuel Characterisation and preliminary activity tests10.1016/j.ijhydene.2011.02.036 ↗
24. Progress in catalytic naphtha reforming process: a review10.1016/j.apenergy.2013.03.080 ↗
25. Effect of number and properties of specific sites on alumina surfaces for Pt-Al2O3 catalysts10.1016/j.apcata.2018.10.004 ↗
26. Lower alkanes dehydrogenation : strategies and reaction routes to corresponding alkenes, Fuel Process
27. Characterization and catalytic behavior in the n-butane dehydrogenation of trimetallic InPtSn/MgAl2O4 catalysts10.1016/j.apcata.2007.09.002 ↗
28. Performance of PtSn catalysts supported on MAl2O4 (M: Mg or Zn) in n-butane dehydrogenation: characterization of the metallic phase10.1016/j.apcata.2004.08.016 ↗
29. Dehydrogenation of long chain paraffins over supported Pt-Sn-K/Al2O3 catalysts: a study of the alumina support effect10.1016/j.apcata.2008.12.024 ↗
30. Effect of Sn promoter on the performance of Pt-Sn/γ-Al2O3 catalysts for n-dodecane dehydrogenation10.1016/S1872-5813(10)60039-4 ↗
31. Improved catalytic performance in propane dehydrogenation of PtSn/γ-Al2O3 catalysts by doping indium10.1016/j.cej.2014.02.084 ↗
32. Novel thiotolerant catalysts for the on-board partial dehydrogenation of jet fuels10.1039/C6RA03409H ↗
33. The European Renewable Ethanol Association
34. Total
35. Properties of high-temperature PEFC Celtec-P 1000 MEAs in start/stop operation mode10.1016/j.jpowsour.2007.08.055 ↗
36. Purity of hydrogen released from the Liquid Organic Hydrogen Carrier compound perhydro dibenzyltoluene by catalytic dehydrogenation10.1016/j.ijhydene.2019.10.067 ↗
37. Valle · 2014
38. Prediction of performance variation caused by manufacturing tolerances and defects in gas diffusion electrodes of phosphoric acid (PA)– Doped polybenzimidazole (PBI)-Based High-Temperature proton exchange membrane fuel cells10.3390/en13061345 ↗
39. Gregg · 1982
40. A comparative and multitechnical approach to the acid character of templated and non-templated
41. Liew · 2011
42. Performance of high temperature PEM fuel cell materials. Part 1: Effects of temperature, pressure and anode dilution10.1016/j.ijhydene.2015.12.069 ↗
43. Long-term testing in dynamic mode of HT-PEMFC H3PO4/PBI celtec-P based membrane electrode assemblies for micro-CHP applications10.1002/fuce.200900153 ↗
44. High temperature PEM fuel cell performance characterisation with CO and CO2 using electrochemical impedance spectroscopy10.1016/j.ijhydene.2011.04.076 ↗
45. Hydrogen sulfide kinetics on PEM fuel cell electrodes10.1149/1.2214548 ↗
46. Development of anodic materials for HT-PEMFCs with high tolerance to H2S10.1016/j.ijhydene.2015.01.036 ↗
47. Durability and reliability in high-temperature reformed hydrogen PEFCs
48. Influence of Ammonia Contamination on HT-PEM fuel cell platinum catalyst10.1149/09809.0537ecst ↗
49. Poisoning of proton exchange membrane fuel cells by contaminants and impurities: review of mechanisms, effects, and mitigation strategies10.1016/j.jpowsour.2019.03.097 ↗
50. Sethuraman · Analysis of Sulfur Poisoning on a PEM Fuel Cell Electrode · 2010 · 55 · 5683