journal article·2020-10

A solid oxide fuel cell with molten tin anode for electricity generation and methane reforming

Oluseye O. Agbede, G.H. Kelsall, K. Hellgardt

Publisher page

Abstract

Abstract A methane-fuelled solid oxide fuel cell (SOFC) with molten tin anode (Sn(l)-SOFC) is designed, fabricated, demonstrated and characterized. This SOFC design incorporates molten tin contained in an alumina crucible as anode for the solution of oxygen atoms transported to an anode | Yttria stabilized Zirconia (YSZ) electrolyte interface and provides bubble | molten tin interfaces for the reaction of methane with oxygen atoms during cell operation. A peak power density of ca. 100 W m−2 at a current density of 222 A m−2 and potential difference of 0.45 V is obtained for this methane-fuelled Sn(l)-SOFC at 850 °C. The ohmic and non-ohmic impedance are ca. 16.72 and 3.36 Ω cm2, respectively. Ohmic potential losses control the reactor performance, with about ca. 59% of those arising from the inherent difficulty in achieving a low resistance contact at the silver wire (silver wool) current collector | Lanthanum strontium manganite cathode interface. Improved performance is achievable by eliminating contact resistance, utilising a molten metal/alloy with greater activity for methane oxidation and operating the cell at higher temperatures. The reaction of methane at bubble | molten tin interface involves its coupling in addition to oxidation, to produce steam, carbon dioxide, hydrogen, ethane and ethylene.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (90)

Show source-provided references
1. BP
2. 2005 · 442
3. Monthly, global emissions of carbon dioxide from fossil fuel consumption10.1111/j.1600-0889.2011.00530.x ↗
4. Masters · 2013
5. High efficiency electric power generation: the environmental role10.1016/j.pecs.2006.08.002 ↗
6. Larminie · 2000
7. Direct hydrocarbon solid oxide fuel cells10.1021/cr020725g ↗
8. Fuel processing for low-temperature and high-temperature fuel cells: challenges, and opportunities for sustainable development in the 21st century10.1016/S0920-5861(02)00231-6 ↗
9. Solid oxide fuel cells10.1039/b105764m ↗
10. Combined cooling, heating and power: a review10.1016/j.pecs.2006.02.001 ↗
11. A comprehensive review of direct carbon fuel cell technology10.1016/j.pecs.2012.01.003 ↗
12. Intermediate temperature solid oxide fuel cells10.1039/b612060c ↗
13. Solid oxide fuel cell technology—features and applications10.1016/j.ssi.2004.07.042 ↗
14. Fossil fuel decarbonization technology for mitigating global warming10.1016/S0360-3199(98)00128-1 ↗
15. Four challenges for nickel steam-reforming catalysts10.1016/j.cattod.2005.10.002 ↗
16. Brief overview of the partial oxidation of methane to synthesis gas10.1023/A:1023552709642 ↗
17. An overview of hydrogen production technologies10.1016/j.cattod.2008.08.039 ↗
18. The multiple roles for catalysis in the production of H210.1016/S0926-860X(98)00244-0 ↗
19. Cooper
20. The poisoning effect of sulfur-containing impurity gas on a SOFC anode: Part I. Dependence on temperature, time, and impurity concentration10.1016/S0167-2738(00)00653-6 ↗
21. Ceria nanocoating for sulfur tolerant Ni-based anodes of solid oxide fuel cells10.1149/1.2748630 ↗
22. Novel SOFC anodes for the direct electrochemical oxidation of hydrocarbon10.1016/S0378-7753(01)01021-7 ↗
23. Direct oxidation of jet fuels and Pennsylvania crude oil in a solid oxide fuel cell10.1016/j.jpowsour.2003.12.044 ↗
24. Redox cycling of Ni-based solid oxide fuel cell anodes: a review10.1002/fuce.200600028 ↗
25. Oxidation failure modes of anode-supported solid oxide fuel cells10.1016/j.jpowsour.2008.03.011 ↗
26. Changes in physical and mechanical properties of SOFC Ni-YSZ composites caused by redox cycling10.1149/1.2883731 ↗
27. Thermodynamics and kinetics of the interaction of carbon and sulfur with solid oxide fuel cell anodes10.1111/j.1551-2916.2009.02980.x ↗
28. Direct electrochemical oxidation of hydrocarbon fuels on SOFCs: improved carbon tolerance of Ni alloy anodes10.1149/1.3208060 ↗
29. Introduction of liquid anode/solid oxide electrolyte fuel cell and its direct energy conversion using waste plastics
30. Liquid tin anode solid oxide fuel cell for direct carbonaceous fuel conversion10.1149/1.2729026 ↗
31. Advancement in liquid tin anode – solid oxide fuel cell technology10.1149/1.2921593 ↗
32. Fundamentals of liquid tin anode solid oxide fuel cell (LTA-SOFC) operation
33. Molten-metal electrodes for solid oxide fuel cells10.1021/ie100457t ↗
34. A comparison of molten Sn and Bi for solid oxide fuel cell anodes10.1149/1.3282443 ↗
35. Direct JP-8 conversion using a liquid tin anode solid oxide fuel cell (LTA-SOFC) for military applications10.1115/1.3005589 ↗
36. Electrochemical characterization of liquid metal anode solid oxide fuel cell10.1149/1.3697433 ↗
37. Characteristics of liquid stannum anode fuel cell operated in battery mode and CO/H2/carbon fuel mode10.1016/j.jpowsour.2013.07.085 ↗
38. Performance evaluation of a liquid tin anode solid oxide fuel cell operating under hydrogen, argon and coal10.1016/j.jpowsour.2014.10.138 ↗
39. A direct carbon fuel cell with a molten antimony anode10.1039/c1ee01863a ↗
40. Energy storage in electrochemical cells with molten Sb electrodes10.1149/2.050204jes ↗
41. Performance characteristics of liquid antimony anode direct carbon fuel cell10.1149/05701.2913ecst ↗
42. Polarization characteristics of liquid antimony anode with smooth single-crystal solid oxide electrolyte10.1016/j.jpowsour.2013.06.125 ↗
43. Direct carbon fuel conversion in a liquid antimony anode solid oxide fuel cell10.1016/j.fuel.2014.07.007 ↗
44. Liquid antimony anode direct carbon fuel cell fueled with mass-produced de-ash coal10.1016/j.energy.2014.08.017 ↗
45. Numerical simulation and experimental characterization of the performance evolution of a liquid antimony anode fuel cell10.1016/j.jpowsour.2015.03.071 ↗
46. Tubular direct carbon solid oxide fuel cells with molten antimony anode and refueling feasibility10.1016/j.energy.2015.10.033 ↗
47. Performance enhancement of liquid antimony anode fuel cell by in-situ electrochemical assisted oxidation process10.1016/j.energy.2017.02.106 ↗
48. Oxy-combustion of coal in liquid-antimony-anode solid oxide fuel cell system10.1016/j.proci.2018.08.056 ↗
49. Molten silver as a direct carbon fuel cell anode10.1016/j.jpowsour.2012.04.096 ↗
50. A new type of SOFC for conversion of high temperature heat to electricity without carnot limitation10.1149/1.3570035 ↗
51. Liquid tin-lead anode solid oxide fuel cell fueled by coal10.1149/1.3570271 ↗
52. Liquid antimony-silver alloys as anodes for direct carbon solid oxide fuel cells10.1016/j.jpowsour.2018.07.011 ↗
53. Basic properties of a liquid tin anode solid oxide fuel cell10.1016/j.jpowsour.2010.12.089 ↗
54. Agbede · 2014
55. Oxidation-reduction behavior of undoped and Sr-doped LaMnO3 nonstoichiometry and defect structure10.1016/0022-4596(89)90053-4 ↗
56. Thermodynamics and solubility of oxygen in liquid metals from E.M.F measurements involving solid electrolytes. Part 2.-Tin10.1039/TF9656100443 ↗
57. A general mathematical model for analyzing the performance of fuel-cell membrane-electrode assemblies10.1016/S0378-7753(03)00358-6 ↗
58. Serway · 2008
59. Hugh · 1993
60. Sharafat · 2000
61. Hydrogen production by direct contact pyrolysis of natural gas10.1021/ef020271q ↗
62. Barin · 1977
63. Barin · 1993
64. JANAF thermochemical tables
65. NIST-JANAF thermochemical tables
66. Frenkel · 1994 · vol. 1
67. Gurvich · 1989 · vol. 1
68. Glushko · 1994 · 13/19 · 127412
69. Glushko · 1996 · 13/19 · 127412
70. Knacke · 1991
71. Landolt · 1999
72. McBride · 1993
73. Activities of oxygen in liquid Bi, Sn, and Ge from electrochemical measurements10.1007/BF02654311 ↗
74. Binnewies · 2002
75. Patnaik · 2003
76. Nonoxidative activation of methane10.1081/CR-120017010 ↗
77. The catalytic oxidative coupling of methane10.1002/anie.199509701 ↗
78. Catalytic conversion of methane to more useful chemicals and fuels: a challenge for the 21st century10.1016/S0920-5861(00)00456-9 ↗
79. Direct conversion of methane to fuels and chemicals10.1016/j.cattod.2009.01.004 ↗
80. Demonstration of anode supported cell technology in kW class stack
81. Resistance measurement in solid oxide fuel cells10.1149/1.1383776 ↗
82. Effect of contact between electrode and current collector on the performance of solid oxide fuel cells10.1016/S0167-2738(03)00127-9 ↗
83. Microstructure‐property relations of solid oxide fuel cell cathodes and current collectors: cathodic polarization and ohmic resistance10.1149/1.1836476 ↗
84. Stannous oxide and the solubility of oxygen in tin
85. The diffusivity and solubility of oxygen in liquid tin and solid silver and the diffusivity of oxygen in solid nickel10.1007/BF02661339 ↗
86. Determination of the diffusivity of oxygen in liquid tin by electrochemical measurement10.2320/jinstmet1952.38.10_958 ↗
87. Electrochemical determination of the oxygen activity in tin melts by means of the solid electrolyte method
88. A review of wet impregnation — an alternative method for the fabrication of high performance and nano-structured electrodes of solid oxide fuel cells10.1016/j.msea.2005.11.052 ↗
89. High-temperature pyrolysis of hydrocarbons. 1. Methane to acetylene10.1021/i260059a017 ↗
90. Oxidative coupling of methane using oxide catalysts10.1039/cs9891800251 ↗