The Li battery digital twin – Combining 4D modelling, electro-chemistry, neutron, and ion-beam techniques
Source abstract
Abstract
Knowledge driven materials and component design is key for improving the performance of Li-ion batteries and solving the remaining hurdles for next-generation battery concepts like all-solid-state batteries. While the spatial and time dependent distribution of Li would help elucidating performance bottlenecks and degradation phenomena, only a few analysis techniques are available, due to the unique nature of Li, especially as Li+-ion. In fact, only two non-destructive techniques with good time resolution can combine spatial information with absolute quantification of Li, one being Neutron Depth Profiling (NDP), the other Ion-Beam-Analysis (IBA). While both exploit nuclear processes, the information gained is complementary. NDP provides high depth resolution, but only limited lateral resolution, whereas IBA has high lateral, but only limited depth resolution. In this study, we benchmark both techniques for the first time using a set of Li-battery test-samples and show the strengths and synergies of both techniques. The derived information regarding the depth dependent Li-concentration is then used to validate a microstructure resolved continuum model of charge, discharge, and relaxation behavior of the cells and electro-chemical analysis. This fundamental work demonstrates a new route to optimize Li batteries on material and component level by combining advanced characterization and digital twin modelling.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. High capacity garnet-based all-solid-state lithium batteries: fabrication and 3D-microstructure resolved modeling10.1021/acsami.8b06705 ↗
2. Significance of direct observation of lithium-ion distribution and potential distribution inside batteries through operando analyses10.1016/j.nxener.2024.100106 ↗
3. Digestion processes and elemental analysis of oxide and sulfide solid electrolytes10.1007/s11581-022-04536-0 ↗
4. The origin of chemical inhomogeneity in garnet electrolytes and its impact on the electrochemical performance10.1039/D0TA04974C ↗
5. Time-of-flight secondary ion mass spectrometry study of lithium intercalation process in LiCoO2 thin film10.1016/j.jpowsour.2016.04.084 ↗
6. The new neutron depth profiling instrument N4DP at the Heinz Maier-Leibnitz Zentrum10.1016/j.nima.2018.09.113 ↗
7. Materials science applications of neutron depth profiling at the PGAA facility of Heinz Maier-Leibnitz Zentrum10.1016/j.matchar.2018.09.030 ↗
8. Trunk · 2021
9. SEI growth Impacts of Lamination, formation and cycling in lithium ion batteries10.3390/batteries6020021 ↗
10. Observation of preferential sputtering of Si/graphite anodes from Li-ion cells by GD-OES and its validation by neutron depth profiling10.1016/j.jpowsour.2023.233972 ↗
11. Mann
12. The influence of hafnium impurities on the electrochemical performance of tantalum substituted Li7La3Zr2O12 solid electrolytes10.1007/s11581-021-04300-w ↗
13. A new high-Throughput focused MeV ion-beam analysis setup10.3390/instruments5010010 ↗
14. Differential cross-section measurements for the 7Li(p,p0)7Li, 7Li(p,p1)7Li, 7Li(p,α0)4He, 19F(p,p0)19F, 19F(p,α0)16O and 19F(p,α1,2)16O reactions10.1016/j.nimb.2012.07.020 ↗
15. SRIM – the stopping and range of ions in matter10.1016/j.nimb.2010.02.091 ↗
16. Mayer · 1997 · 67
17. MultiSIMNRA: a computational tool for self-consistent ion beam analysis using SIMNRA10.1016/j.nimb.2015.10.038 ↗
18. Isotopic compositions of the elements 2013 (IUPAC technical report)10.1515/pac-2015-0503 ↗
19. Thermodynamic consistent transport theory of Li-ion batteries10.1016/j.jpowsour.2010.11.088 ↗
20. M. Clausnitzer et al., ‘Optimizing the composite cathode microstructure in all-solid-state batteries by structure-resolved simulations’, Batteries & Supercaps, vol. n/a, no. n/a, p. e202300167, doi: 10.1002/batt.202300167.10.1002/batt.202300167 ↗
21. Structural assessment of the electrochemical performance of LixCoO2 membrane electrodes by X-ray diffraction and absorption refinements10.1007/BF02375709 ↗
22. Structure and electron density analysis of electrochemically and chemically delithiated LiCoO2 single crystals10.1016/j.jssc.2006.10.018 ↗
23. Crystal structures, electrical conductivities and electrochemical properties of LiCo1−xMgxO2 (0≤x≤0.11)10.1016/j.jpowsour.2006.04.030 ↗
24. Effect of Li+/H+ exchange in water treated Ta-doped Li7La3Zr2O1210.1016/j.ssi.2016.05.016 ↗
25. Indexing of the crystallographic planes in rhombohedral crystals
26. Cross-section measurement for the 7Li(p,α)4He reaction at proton energies 0.6 – 2 MeV10.1016/j.nimb.2022.06.010 ↗
27. Thick electrodes for Li-ion batteries: a model based analysis10.1016/j.jpowsour.2016.09.143 ↗
28. Mughabghab · 1981
29. Quantitative lithiation depth profiling in Silicon containing anodes investigated by ion beam analysis10.3390/batteries8020014 ↗