A new shape-conformable battery concept: The 3D printed injectable battery filled with semi-solid electrodes
Source abstract
Abstract
Shape-conformable batteries are of high interest for a variety of portable electronics. In this work, a new manufacturing concept for cost-effective shape-conformable batteries based on the combination of additive manufacturing (AM) technology and semi-solid electrodes (SSEs) is proposed. The manufacturing process consists in two steps. Firstly, the electrochemical cell is printed by stereolithography-based technique (SLA) and subsequently assembled. In a second step, flowable SSEs are injected into the cells by a double injection mechanism to introduce both SSEs in parallel. While syringe outlets, cell inlets and shape of the cell are found to play an important role in the injection process, formulation of the SSEs are observed to influence the rheological and electrochemical properties. For the proof of concept, a battery having the shape of the logo of our university is fabricated using Zn-based and MnO2-based SSEs achieving high utilization rate (>150 mAh gMnO2−1) and acceptable cycle stability (0.45% h−1) and thus showing the feasibility of the proposed shape-conformable injectable battery. The manufacturing process is finally extended to other battery chemistries leading to improved cycling stability and confirming the versatility of the manufacturing concept.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Toward high resolution 3D printing of shape-conformable batteries via vat photopolymerization: review and perspective10.1109/ACCESS.2021.3119533 ↗
2. Towards smart free form-factor 3D printable batteries10.1039/C8SE00122G ↗
3. A structural battery and its multifunctional performance10.1002/aesr.202170008 ↗
4. Overview on lithium-ion battery 3D-printing by means of material extrusion10.1149/09813.0003ecst ↗
5. Printable solid-state lithium-ion batteries: a new route toward shape-conformable power sources with aesthetic versatility for flexible electronics10.1021/acs.nanolett.5b01394 ↗
6. Overview on the applications of three-dimensional printing for rechargeable lithium-ion batteries10.1016/j.apenergy.2019.114002 ↗
7. Additive manufacturing of batteries10.1002/adfm.201906244 ↗
8. Semi-solid lithium rechargeable flow battery10.1002/aenm.201100152 ↗
9. Aqueous semi-solid flow cell: demonstration and analysis10.1039/c3cp53428f ↗
10. Polysulfide flow batteries enabled by percolating nanoscale conductor networks10.1021/nl500740t ↗
11. Non-aqueous semi-solid flow battery based on Na-ion chemistry. P2-type NaxNi0.22Co0.11Mn0.66O2–NaTi2(PO4)310.1039/C4CC09597A ↗
12. Al-ion battery based on semisolid electrodes for higher specific energy and lower cost10.1021/acsaem.9b02253 ↗
13. The injectable battery. A conceptually new strategy in pursue of a sustainable and circular battery model10.1016/j.jpowsour.2020.228839 ↗
14. Semi-flowable Zn semi-solid electrodes as renewable energy carrier for refillable Zn–Air batteries10.1016/j.jpowsour.2022.231480 ↗
15. Regenerative electrochemical ion pumping cell based on semi-solid electrodes for sustainable Li recovery10.1016/j.desal.2022.115764 ↗
16. Percolation characteristics of conductive additives for capacitive flowable (Semi-Solid) electrodes10.1021/acsami.9b19739 ↗
17. What are batteries, fuel cells, and supercapacitors?10.1021/cr020730k ↗
18. Float-charging protocol in rechargeable Zn–MnO2 batteries: unraveling the key role of Mn2+ additives in preventing spontaneous pH changes10.1016/j.elecom.2022.107271 ↗
19. Unravelling the mechanism of rechargeable aqueous Zn–MnO2 batteries: implementation of charging process by electrodeposition of MnO210.1002/cssc.202001216 ↗
20. Cationic surfactant-type electrolyte additive enables three-dimensional dendrite-free zinc anode for stable zinc-ion batteries10.1021/acsenergylett.0c01792 ↗
21. Effects of cationic CTAB and anionic SDBS surfactants on the performance of Zn-MnO2 alkaline batteries10.1016/j.jpowsour.2006.10.084 ↗
22. Rechargeability of aqueous sulfate Zn/MnO2 batteries enhanced by accessible Mn2+ ions10.1016/j.ensm.2018.06.019 ↗
23. Salt-concentrated acetate electrolytes for a high voltage aqueous Zn/MnO2 battery10.1016/j.ensm.2020.03.011 ↗
24. The function of Mn2+ additive in aqueous electrolyte for Zn/δ-MnO2 battery10.1016/j.electacta.2020.136445 ↗
25. The Zn-MnO2 battery: the influence of aqueous LiOH and KOH electrolytes on the intercalation mechanism10.1149/1.2932056 ↗
26. Toward a reversible Mn4+/Mn2+ redox reaction and dendrite‐free Zn anode in near‐neutral aqueous Zn/MnO2 batteries via salt anion chemistry10.1002/aenm.201904163 ↗
27. A highly reversible neutral zinc/manganese battery for stationary energy storage10.1039/C9EE03702K ↗
28. Breaking the 2 v barrier in aqueous zinc chemistry: creating 2.45 and 2.8 v MnO2-Zn aqueous batteries10.1021/acsenergylett.9b01643 ↗
29. Designing dendrite‐free zinc anodes for advanced aqueous zinc batteries10.1002/adfm.202001263 ↗
30. Impact of cathode additives on the cycling performance of rechargeable alkaline manganese dioxide–zinc batteries for energy storage applications10.1007/s10800-016-1034-1 ↗
31. Impact of triethanolamine as an additive for rechargeable alkaline Zn/MnO2 batteries under limited depth of discharge conditions10.1149/2.0641714jes ↗
32. Charge storage mechanism of MnO2 cathodes in Zn/MnO2 batteries using ionic liquid-based gel polymer electrolytes10.1016/j.elecom.2015.09.011 ↗
33. Effect of multiple cation electrolyte mixtures on rechargeable Zn-MnO2 alkaline battery10.1021/acs.chemmater.6b00232 ↗
34. Prussian blue cathode materials for sodium-ion batteries and other ion batteries
35. Toward high-performance hybrid Zn-based batteries via deeply understanding their mechanism and using electrolyte additive10.1002/adfm.201903605 ↗
36. A high-rate and long cycle life aqueous electrolyte battery for grid-scale energy storage
37. Manganese hexacyanomanganate open framework as a high-capacity positive electrode material for sodium-ion batteries
38. Realizing high zinc reversibility in rechargeable batteries10.1038/s41560-020-0674-x ↗