Impact of pore-forming by PSF in the anode on power generation and mass transport characteristics of direct formic acid fuel cell
Source abstract
Abstract
Controlling the mass transport in the anode plays a crucial role in the higher performance of direct formic acid fuel cells (DFAFCs) due to the two-phase flow of the liquid fuel reactant with the CO 2 gaseous product. A pore-designed anode catalyst layer using polystyrene fiber (PSF) as a pore former is fabricated to investigate the relationship between the pore properties of the DFAFC and power generation/mass transport characteristics by controlling the diameters and amounts of the PSF. PSFs with various average diameters are prepared by the electrospinning. The anode catalyst containing the PSFs is coated by spraying method on the membrane. The PSFs in the anode catalyst layer are removed by soaking in ethyl acetate, resulting the pore forming in the catalyst layer. DFAFC using 3 μm-0.5 PSF as pore former shows the highest crossover flux at the operating temperatures of 30 °C and 60 °C, which results in 25% and 5% increases of the maximum power density respectively, as compared to without-PSF. This indicates that the appropriate PSF properties, i.e., diameter and amount, can contribute to enhancing the liquid saturation in the catalyst layer by increasing the fuel transport and CO 2 removal, resulting in a performance improvement.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Direct liquid fuel cells: a review10.1016/j.ijhydene.2017.01.117 ↗
2. Direct formic acid fuel cell portable power system for the operation of a laptop computer10.1016/j.jpowsour.2006.07.013 ↗
3. Fuel crossover in direct formic acid fuel cells10.1016/j.jpowsour.2007.02.062 ↗
4. High power density direct formic acid fuel cells10.1016/j.jpowsour.2003.11.051 ↗
5. C. Rice, S. Ha, R.I. Masel, P. Waszczuk, A. Wieckowski, T. Barnard, Direct Formic Acid Fuel Cells, (n.d).
6. A parametric study of the direct formic acid fuel cell (DFAFC) performance and fuel crossover10.1016/j.ijhydene.2014.04.149 ↗
7. Novel method for investigation of two-phase flow in liquid feed direct methanol fuel cells using an aqueous H2O2 solution10.1016/S0378-7753(03)00824-3 ↗
8. In situ visualization study of CO2 gas bubble behavior in DMFC anode flow fields10.1016/j.jpowsour.2004.05.033 ↗
9. Vielstich · 2003
10. Electrochemical and flow characterization of a direct methanol fuel cell10.1016/j.jpowsour.2004.01.055 ↗
11. A perspective on development of fuel cell materials: electrodes and electrolyte10.1002/er.7635 ↗
12. Alkaline direct liquid fuel cells: advances, challenges and perspectives10.1016/j.jelechem.2022.116712 ↗
13. Power generation enhancement in direct methanol fuel cells using non-uniform cross-sectional serpentine channels10.1016/j.enconman.2019.03.058 ↗
14. A novel design for a flow field configuration, of a direct methanol fuel cell10.1016/j.jpowsour.2009.11.119 ↗
15. A novel multi-porous and hydrophilic anode diffusion layer for DMFC10.1016/j.ijhydene.2014.08.098 ↗
16. A novel gas diffusion layer and its application to direct methanol fuel cells
17. Laser-perforated anode gas diffusion layers for direct methanol fuel cells10.1016/j.ijhydene.2021.02.199 ↗
18. Recent advances in multi-scale design and construction of materials for direct methanol fuel cells10.1016/j.nanoen.2019.104048 ↗
19. The pore structure of direct methanol fuel cell electrodes10.1149/1.1993488 ↗
20. Composite anode catalyst layer for direct methanol fuel cell10.1016/j.elecom.2008.07.030 ↗
21. Impact of anode catalyst layer porosity on the performance of a direct formic acid fuel cell10.1016/j.electacta.2011.11.057 ↗
22. Effect of porosity in catalyst layers on direct methanol fuel cell performances10.1002/fuce.201200014 ↗
23. Construction of porous anode by sacrificial template for a passive direct methanol fuel cell10.1016/j.jpowsour.2014.03.121 ↗
24. Electrospinning: designed architectures for energy conversion and storage devices10.1039/c1ee02201f ↗
25. Tailored porosities of the cathode layer for improved polymer electrolyte fuel cell performance10.1016/j.jpowsour.2015.04.079 ↗
26. Electrospinning of uniform polystyrene fibers: the effect of solvent conductivity10.1016/j.polymer.2008.09.025 ↗
27. Effect of experimental parameters on morphological, mechanical and hydrophobic properties of electrospun polystyrene fibers10.3390/ma8052718 ↗
28. Investigation of porous structure formation of catalyst layers for proton exchange membrane fuel cells and their effect on cell performance10.1016/j.ijhydene.2016.09.078 ↗
29. Porosity and thickness effect of Pd–Cu–Si metallic glasses on electrocatalytic hydrogen production and storage10.1016/j.matdes.2021.110099 ↗
30. Overpotential analysis of the direct formic acid fuel cell10.1016/j.electacta.2016.03.062 ↗
31. Performance of direct formic acid fuel cell using transition metal-nitrogen-doped carbon nanotubes as cathode catalysts
32. SOLID-LIQUID-VAPOR phenomena and interfacial heat and mass transfer
33. Vapor feed direct methanol fuel cells with passive thermal-fluids management system10.1016/j.jpowsour.2007.02.024 ↗
34. Overview on the developments of vapor-feed direct methanol fuel cells10.1016/j.ijhydene.2014.02.002 ↗
35. Role of co2 in methanol and water transport in direct methanol fuel cells10.1016/j.electacta.2014.04.087 ↗