Electrophoretically deposited LAGP-based electrolytes - Structure and ion transport in plasticized systems
Source abstract
Abstract
The development of an efficient devices for energy storage, conversion, and transmission is one of the key priority areas today. At the center of these activities is the development of all-solid-state high-energy and high-power lithium-ion batteries. Our research is focused on the study of ion transport in a plasticized-by-ionic-liquid composite membrane formed by electrophoretic deposition (EPD). The EPD membrane comprises above 85% of high-ion-conductivity ceramic matrix Li 1.5Al 0.5Ge 1.5(PO 4) 3 (LAGP) and less than 15% polyethyleneimine (PEI). The EPD rate and morphology of the membrane was characterized by ESEM, TOFSIMS and DSC methods. 0.3 M LiTFSI–PYR14TFSI (IL) was infused in the membrane to form a quasi-solid electrolyte. The complex, non-Debye dielectric response of the quasi-solid electrolyte, tested over the temperature and frequency ranges of (−140 °C) to (+100 °C) and 10 −2 – 10 6 Hz, has been described in terms of several distributed relaxation processes separated by different frequency and temperature ranges. While at low temperatures, the main contribution is from LAGP, in the middle- and high-temperature regions, the superposition of a few non-Arrhenius processes is observed. Relaxation is perturbed by clear phase transition related to melting of the ionic liquid. Different scales of the ionic transport and corresponding relaxation of the apparent dipole moment in the materials are discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Electrophoretic Deposition in Materials Science · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. PEO/garnet composite electrolytes for solid-state lithium batteries: from “ceramic-in-polymer” to “polymer-in-ceramic10.1016/j.nanoen.2017.12.037 ↗
2. Evaluation of ion-transport in composite polymer-in-ceramic electrolytes. Case study of active and inert ceramics10.1016/j.electacta.2019.03.006 ↗
3. Quasi-solid polymer-in-ceramic membrane for Li-ion batteries10.1016/j.electacta.2013.09.106 ↗
4. On the way to high-conductivity single lithium-ion conductors10.1007/s10008-017-3638-8 ↗
5. Superionic conductivity in a lithium aluminum germanium phosphate glass–ceramic10.1149/1.2988731 ↗
6. Correlating transport and structural properties in Li1+ xAlxGe2- x(PO4)3 (LAGP) prepared from aqueous solution10.1021/acsami.8b00842 ↗
7. Lithium ion-conducting glass-ceramics of Li1.5Al 0.5Ge1.5(PO4)3-xLi2O (x=0.0-0.20) with good electrical and electrochemical properties10.1111/j.1551-2916.2007.01827.x ↗
8. Ion transport and vibrational spectra of branched polymer and dendrimer electrolytes10.1021/cm0008866 ↗
9. Investigation on lithium-polymer electrolyte batteries10.1016/S0378-7753(01)00609-7 ↗
10. Synchronized electrospinning and electrospraying technique for manufacturing of all-solid-state lithium-ion batteries10.1016/j.jpowsour.2019.05.008 ↗
11. 3D printable solid and quasi‐solid electrolytes for advanced batteries
12. Plasticized 3D-printed polymer electrolytes for lithium-ion batteries10.1149/1945-7111/ac39d5 ↗
13. A review on fundamentals and applications of electrophoretic deposition (EPD)10.1016/j.pmatsci.2006.07.001 ↗
14. 2012 · 2012
15. Electrophoretic fabrication of LiCoO2 positive electrodes for rechargeable lithium batteries10.1016/S0378-7753(01)00678-4 ↗
16. EPD of thick films for their application in lithium batteries10.1016/j.jeurceramsoc.2007.02.051 ↗
17. Electrophoretic deposition of lithium iron phosphate cathode for thin-film 3D-microbatteries10.1016/j.jpowsour.2011.09.108 ↗
18. Ultralong (10K) cycle-life and high-power Li-ion storage in Li4Ti5O12 films developed via sustainable electrophoretic deposition process10.1021/acssuschemeng.7b03787 ↗
19. Electrochemical performance of electrophoretically deposited nanostructured LiMnPO4-sucrose derived carbon composite electrodes for lithium ion batteries10.1166/jnn.2015.9174 ↗
20. On the electrophoretic and sol-gel deposition of active materials on aluminium rod current collectors for three-dimensional Li-ion micro-batteries10.1016/j.tsf.2014.03.069 ↗
21. Electrophoretic deposition of ceramic materials for fuel cell applications10.1016/S0955-2219(00)00098-4 ↗
22. A review of electrophoretic deposition of metal oxides and its application in solid oxide fuel cells10.1016/j.cis.2020.102102 ↗
23. Development and characterization of composite YSZ-PEI electrophoretically deposited membrane for Li-ion battery
24. A solid-electrolyte-reinforced separator through single-step electrophoretic assembly for safe high-capacity lithium ion batteries10.1016/j.jpowsour.2019.227469 ↗
25. Colloidal processing of Li2S-P2S5 films fabricated via electrophoretic deposition methods and their characterization as a solid electrolyte for all solid state lithium ion batteries10.2109/jcersj2.16205 ↗
26. Preparation of a self-supported SiO2 membrane as a separator for lithium-ion batteries10.1002/batt.201900169 ↗
27. A comprehensive review of nanomaterials developed using electrophoresis process for high-efficiency energy conversion and storage systems10.3390/en11113122 ↗
28. Electrophoretic deposition as a fabrication method for Li-ion battery electrodes and separators – a review10.1016/j.jpowsour.2022.231448 ↗
29. Solid polymer-in-ceramic electrolyte formed by electrophoretic deposition10.1149/2.0221511jes ↗
30. DLS and zeta potential - what they are and what they are not?10.1016/j.jconrel.2016.06.017 ↗
31. Hunter · 1981
32. An analytical approach to elucidate the architecture of polyethyleneimines10.1002/app.51657 ↗
33. Electrochemical behavior of Li2FeSiO4 with ionic liquids at elevated temperature10.1149/1.3133183 ↗
34. Thermally stable and nonflammable electrolytes for lithium metal batteries: progress and perspectives10.1002/smsc.202170025 ↗
35. Ionic conductivity in branched polyethylenimine-sodium trifluoromethanesulfonate complexes. Comparisons to analogous complexes made with linear polyethylenimine10.1021/ma00174a012 ↗
36. Lithium ion diffusion mechanism and associated defect behaviors in crystalline Li1+ xAlxGe2- x(PO4)3 solid-state electrolytes10.1021/acs.jpcc.9b08390 ↗
37. Dispersion and absorption in dielectrics I. Alternating current characteristics10.1063/1.1750906 ↗
38. Jonscher · 1996
39. Experimental methods
40. Dielectric spectroscopy data treatment: I. Frequency domain10.1088/0957-0233/15/4/020 ↗
41. Energy storage materials for solid-state batteries: design by mechanochemistry10.1002/aenm.202101022 ↗
42. Structural evolution of NASICON-type Li1+xAlxGe2-x(PO4)3 using in situ synchrotron X-ray powder diffraction10.1039/C6TA00402D ↗
43. On the temperature and pressure dependence of dielectric relaxation processes in ionic liquids10.1039/D1CP01636A ↗