journal article·2023-01

New insights into steady-state multiplicity in polymer electrolyte membrane fuel cell

Yangbin Shao, Liangfei Xu, Zunyan Hu, Ling Xu, Xinyi Jia, Xiyuan Zhang, Yang Zhao, Jianqiu Li, Minggao Ouyang

Publisher page

Abstract

Polymer electrolyte membrane fuel cell (PEMFC) is a potential candidate as power source for electrified transportation. Technically speaking, PEMFC is an energy conversion device involving complicated physico-chemical processes and its highly non-linear characteristic is very likely to cause unpredictability and non-repeatability, causing confusions about performance test, operation conditions optimization, etc. Steady state multiplicity is one of the most interesting types for PEMFC`s non-linear characteristic, however, few works comprehensively investigates the underlying mechanisms. In this work, taking a counter-flow automotive size fuel cell as an example, the PEMFC`s steady state multiplicity are experimentally discovered and, by developing numerical model, the internal states evolution are reconstructed and model-based sensitivity analysis is conducted to reveal the multi-physics coupling mechanisms inside, which would help us to have a deeper understanding on PEMFC as a complex physical system: (a) the water content in the middle area (in-plane direction) are more likely to have multi steady states, which dominates the bulk steady-state multiplicity (b) PEMFC`s steady state multiplicity is more obvious under the condition of low cathode RH, low hydrogen stoichiometry and large current density. (c) For the same output voltage, PEMFC operates at higher current under galvanostatic mode than potentiostatic mode.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. New roads and challenges for fuel cells in heavy-duty transportation10.1038/s41560-021-00775-z ↗
2. Fuel cell system for Honda CLARITY fuel cell10.1016/j.etran.2020.100046 ↗
3. Challenges in applying highly active Pt-based nanostructured catalysts for oxygen reduction reactions to fuel cell vehicles10.1038/s41565-020-00824-w ↗
4. New insights into perfluorinated sulfonic-acid ionomers10.1021/acs.chemrev.6b00159 ↗
5. Research progress of catalyst layer and interlayer interface structures in membrane electrode assembly (MEA) for proton exchange membrane fuel cell (PEMFC) system10.1016/j.etran.2020.100075 ↗
6. Dynamic contact angle modeling of droplet reattachment at the gas channel wall in polymer electrolyte fuel cells10.1016/j.etran.2019.100003 ↗
7. Effect of PTFE and liquid water on the thermal characteristics of compressed gas diffusion backing of PEM fuel cell10.1016/j.etran.2022.100162 ↗
8. Hysteresis of output voltage and liquid water transport in gas diffusion layer of polymer electrolyte fuel cells10.1016/j.enconman.2019.01.084 ↗
9. Polymer electrolyte membrane fuel cell transient voltage characteristic considering liquid water imbibition and drainage in gas diffusion layer10.1016/j.jpowsour.2021.229683 ↗
10. Pseudo-steady state of high-frequency resistance for polymer electrolyte membrane fuel cell: effect of in-plane heterogeneity10.1149/1945-7111/ac1d00 ↗
11. Nonlinear dynamics of fuel cells: a review
12. Steady-state multiplicity in the autohumidification polymer electrolyte membrane fuel cell10.1016/S0009-2509(03)00345-2 ↗
13. The dynamic response of PEM fuel cells to changes in load10.1016/j.ces.2004.10.033 ↗
14. Ignition waves in a stirred PEM fuel cell10.1016/j.ces.2005.11.068 ↗
15. Bifurcation analysis of a two-phase PEMFC model10.1115/1.2885392 ↗
16. Oscillations of PEM fuel cells at low cathode humidification10.1016/j.jelechem.2010.04.005 ↗
17. Pressure-voltage oscillations as a diagnostic tool for PEFC cathodes10.1016/j.elecom.2009.11.003 ↗
18. Voltage loss and fluctuation in proton exchange membrane fuel cells: the role of cathode channel plurality and air stoichiometric ratio10.1016/j.jpowsour.2010.10.026 ↗
19. Hydration and dehydration cycles in polymer electrolyte fuel cells operated with wet anode and dry cathode feed: a neutron imaging and modeling study10.1016/j.jpowsour.2017.03.155 ↗
20. Mathematical modeling, steady-state and dynamic behavior, and control of fuel cells: a review10.1021/ie100032c ↗
21. Theoretical investigation of steady state multiplicities in solid oxide fuel cells10.1007/s10800-005-9080-0 ↗
22. The use of a novel water porosimeter to predict the water handling behaviour of gas diffusion media used in polymer electrolyte fuel cells10.1016/j.jpowsour.2008.11.055 ↗
23. Wettability and capillary behavior of fibrous gas diffusion media for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2009.04.052 ↗
24. Pt-oxide coverage-dependent oxygen reduction reaction (ORR) kinetics10.1149/2.088205jes ↗
25. A mathematical model toward real-time monitoring of automotive PEM fuel cells10.1149/1945-7111/ab6dd1 ↗
26. ”3D+ 1D” modeling approach toward large-scale PEM fuel cell simulation and partitioned optimization study on flow field10.1016/j.etran.2020.100090 ↗
27. Analytical calculation and evaluation of water transport through a proton exchange membrane fuel cell based on a one-dimensional model10.1016/j.energy.2016.06.020 ↗
28. Dynamic modeling of Pt degradation and mitigation strategies in polymer electrolyte membrane fuel cells10.1016/j.etran.2022.100171 ↗
29. Modeling and experimental validation of Pt loading and electrode composition effects in PEM fuel cells10.1149/2.0221508jes ↗
30. Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗
31. A two-phase flow and non-isothermal agglomerate model for a proton exchange membrane (PEM) fuel cell10.1016/j.energy.2014.06.065 ↗
32. A segmented fuel cell unit with functionally graded distributions of platinum loading and operating temperature10.1016/j.cej.2020.126889 ↗
33. Understanding water uptake and transport in nafion using x-ray microtomography10.1021/mz300651a ↗