Low temperature regenerated copolymerization doped environmentally available marine biowastes based ceramic membrane as efficient separator for bioelectrochemical systems (BESs)
Source abstract
Abstract
Ceramic membranes based on naturally available materials are cost-effective and environmentally friendly alternatives to substitute Nafion™ 117 as separator in bioelectrochemical systems (BESs). In this study, copolymerization doped marine biomass-based (Ostrea gigas tnunb shell, OGTS; Sea sand, SS) ceramic membrane separators (CMSs) modified by Cu/Fe are synthesized by sintering. Modified CMSs exhibit superior chemical properties of acid and alkali resistance and thermodynamic stability. For CMS-ASO-Cu (CMS-Al 2O 3 /SS/OGTS/Cu), Oxygen diffusion coefficient of 3.41 × 10 −6 cm s −1 is 1.88 times higher than that of CMS-ASO-Fe (CMS-Al 2O 3 /SS/OGTS/Fe). Proton transfer numbers of CMS-ASO-Cu is up to 0.62. Maximum power density 53.21 mW m −2 and current density 408.62 mA m −2 are achieved from CMS-ASO-Cu assisted BES, along with organic removal performance (COD >80%, NH 4 + -N > 80%, TP > 92%). Regeneration and antibacterial properties of the CMSs are confirmed by low-temperature sintering method and inhibition zone assay, ensuring the long-term, efficient and sustainable function of the C-BES.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · Microbial Fuel Cells and Bioremediation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Enhanced removal of copper by electroflocculation and electroreduction in a novel bioelectrochemical system assisted microelectrolysis10.1016/j.biortech.2019.122507 ↗
2. A novel bio-electrochemical system with sand/activated carbon separator, Al anode and bio-anode integrated micro-electrolysis/electro-flocculation cost effectively treated high load wastewater with energy recovery10.1016/j.biortech.2017.09.134 ↗
3. Self-sustained recovery of silver with stainless-steel based Cobalt/Molybdenum/Manganese polycrystalline catalytic electrode in bio-electroreduction microbial fuel cell (BEMFC)
4. Bioaugmentation using Pseudomonas aeruginosa with an approach of intermittent aeration for enhanced power generation in ceramic MFC
5. The functional separator for lithium-ion batteries based on phosphonate modified nano-scale silica ceramic particles10.1016/j.jpowsour.2021.229908 ↗
6. Applications and benefits of ceramic membranes10.1016/S0958-2118(03)11016-6 ↗
7. Developing better ceramic membranes for water and wastewater treatment: where microstructure integrates with chemistry and functionalities
8. Low-cost silica based ceramic supported thin film composite hollow fiber membrane from Guinea corn husk ash for efficient removal of microplastic from aqueous solution10.1016/j.jhazmat.2021.127298 ↗
9. “Green” electronics: biodegradable and biocompatible materials and devices for sustainable future10.1039/C3CS60235D ↗
10. Performance evaluation of low cost microbial fuel cell fabricated using earthen pot with biotic and abiotic cathode10.1016/j.biortech.2009.07.089 ↗
11. Comparing the short and long term stability of biodegradable, ceramic and cation exchange membranes in microbial fuel cells10.1016/j.biortech.2013.08.163 ↗
12. Al2O3/TiO2 coated separators: roll-to-roll processing and implications for improved battery safety and performance10.1016/j.jpowsour.2021.230259 ↗
13. Development of low cost ceramic separator using mineral cation exchanger to enhance performance of microbial fuel cells10.1016/j.electacta.2015.03.105 ↗
14. Perovskite ceramic membrane separator with improved biofouling resistance for yeast-based microbial fuel cells10.1016/j.memsci.2020.117843 ↗
15. Characterization of uncharged and sulfonated porous poly(vinylidene fluoride) membranes and their performance in microbial fuel cells10.1016/j.memsci.2014.03.061 ↗
16. Performance comparison of up-flow microbial fuel cells fabricated using proton exchange membrane and earthen cylinder10.1016/j.ijhydene.2010.03.048 ↗
17. High performance ceramic-coated separators prepared with lithium ion-containing SiO2 particles for lithium-ion batteries10.1016/j.jpowsour.2012.10.082 ↗
18. A review into the use of ceramics in microbial fuel cells10.1016/j.biortech.2016.03.135 ↗
19. Streamlining of commercial Berl saddles: a new material to improve the performance of microbial fuel cells10.1016/j.energy.2014.05.012 ↗
20. Microbial fuel cell (MFC) using commercially available unglazed ceramic wares: low-cost ceramic separators suitable for scale-up10.1016/j.ijhydene.2017.02.095 ↗
21. Fabrication of porous carbon derived from cotton/polyester waste mixed with oyster shells: pore-forming process and application for tetracycline removal10.1016/j.chemosphere.2020.129483 ↗
22. Sulfonated Fe3O4/PES nanocomposites as efficient separators in microbial fuel cells10.1016/j.memsci.2020.118967 ↗
23. Development of a novel carbon-based conductive membrane with in-situ formed MnO2 catalyst for wastewater treatment in bio-electrochemical system (BES)10.1016/j.memsci.2017.12.053 ↗
24. Beneficial utilization of Al/Si/O-rich solid wastes for environment-oriented ceramic membranes10.1016/j.jhazmat.2020.123427 ↗
25. Surfactant addition to enhance bioavailability of bilge water in single chamber microbial fuel cells (MFCs)10.1016/j.jhazmat.2019.02.007 ↗
26. Bioaugmentation using Pseudomonas aeruginosa with an approach of intermittent aeration for enhanced power generation in ceramic MFC
27. American public health association American water works association water environment federation
28. Ultrafast separation of emulsified oil/water mixtures by ultrathin free-standing single-walled carbon nanotube network films10.1002/adma.201204873 ↗
29. Unseeded, spontaneous nucleation of spherulitic magnesium calcite10.1016/j.jcis.2021.03.002 ↗
30. Facile synthesis of MgO–Mg2SiO4 composite ceramics with high strength and low thermal conductivity10.1016/j.ceramint.2021.03.331 ↗
31. Gehlenite and anorthite formation from fluid fly ash10.1016/j.molstruc.2017.12.084 ↗
32. Kinetics and mechanism of formation of gehlenite, Al–Si spinel and anorthite from the mixture of kaolinite and calcite10.1016/j.solidstatesciences.2013.09.014 ↗
33. Biological weathering of phlogopite during enriched vermicomposting10.1016/S1002-0160(20)60083-2 ↗
34. Sorption of selenium species onto phlogopite and calcite surfaces: DFT studies10.1016/j.jconhyd.2019.103553 ↗
35. Suppressed voltage decay and improved electrochemical performance by coating LiAl5O8 on the surface of Li1.2Mn0.54Ni0.13Co0.13O210.1016/j.jallcom.2019.06.208 ↗
36. Improved mechanical and microwave absorption properties of SiCf/SiC composites with SiO2 filler10.1016/j.ceramint.2021.02.024 ↗
37. Enhanced mechanical and biological performances of CaO-MgO-SiO2 glass-ceramics via the modulation of glass and ceramic phases10.1016/j.msec.2021.112060 ↗
38. Microwave absorption and mechanical properties of SiCf/SiOC composites with SiO2 fillers10.1016/j.ceramint.2020.11.214 ↗
39. Preparation of γ-Al2O3/α-Al2O3 ceramic foams as catalyst carriers via the replica technique
40. Formation mechanism of high apparent porosity ceramics prepared from fly ash cenosphere10.1016/j.jallcom.2018.03.303 ↗
41. Three-dimensional porous silica ceramics with tailored uniform pores: prepared by inactive spheres10.1016/j.jeurceramsoc.2015.06.020 ↗
42. Porous silica ceramics with closed-cell structure prepared by inactive hollow spheres for heat insulation10.1016/j.jallcom.2015.12.061 ↗
43. Effect of SiO2 on microstructure and mechanical properties of composite ceramic coatings prepared by centrifugal-SHS process10.1016/j.ceramint.2021.01.144 ↗
44. Rafiuddin, Preparation, characterization and electrical studies of polymer composite solid electrolyte (1-x) polyaniline-Ag3PO4. x Al2O310.1016/j.matpr.2020.07.290 ↗
45. Electrogenic and hydrocarbonoclastic biofilm at the oil-water interface as microbial responses to oil spill10.1016/j.watres.2021.117092 ↗
46. Simultaneous electricity generation and microbially-assisted electrosynthesis in ceramic MFCs10.1016/j.bioelechem.2015.03.001 ↗
47. A practical approach to measuring the ion-transport number of cation-exchange membranes: effects of junction potential and analyte concentration10.1016/j.memsci.2021.119471 ↗
48. Low-cost separators for enhanced power production and field application of microbial fuel cells (MFCs)10.1016/j.electacta.2014.03.046 ↗
49. Separator characteristics for increasing performance of microbial fuel cells10.1021/es901631p ↗
50. A combined SEM, CV and EIS study of multi-layered porous ceramic reactors for flue gas purification10.1016/j.ceramint.2012.05.097 ↗
51. Electrochemical impedance spectroscopy for microbial fuel cell characterization
52. Denitrifying anaerobic methane oxidation process responses to the addition of growth factor betaine in the MFC-granular sludge coupling system: enhancing mechanism and metagenomic analysis10.1016/j.jhazmat.2021.126139 ↗
53. Microbiome characterization of MFCs used for the treatment of swine manure10.1016/j.jhazmat.2015.02.014 ↗
54. Elucidating the impacts of intermittent in-situ ozonation in a ceramic membrane bioreactor: micropollutant removal, microbial community evolution and fouling mechanisms10.1016/j.jhazmat.2020.123730 ↗
55. Characterization and performance study of sulfonated poly ether ether ketone/Fe3O4 nano composite membrane as electrolyte for microbial fuel cell10.1016/j.cej.2013.12.103 ↗
56. Characterization and mitigation of the fouling of flat-sheet ceramic membranes for direct filtration of the coagulated domestic wastewater
57. Hydrophobic ceramic membrane for membrane distillation: a mini review on preparation, characterization, and applications10.1016/j.seppur.2019.02.014 ↗