A model of full thermodynamic stabilization of nanocrystalline alloys
Source abstract
Abstract
We propose a model of a polycrystalline alloy combining the Potts model for grain orientations with a lattice-gas model for solute thermodynamics and diffusion. The alloy evolution with this model is implemented by kinetic Monte Carlo simulations with nonlinear transition barriers between microstates. The model is applied to investigate the long-standing question of whether grain boundary (GB) segregation of an appropriate solute can drive the GB free energy to zero, creating a fully stabilized polycrystalline state with a finite grain size. The model reproduces stable polycrystalline states under certain conditions, provided the solute-solute interactions are repulsive. The material's structure minimizing the total free energy is not static. It exists in a state of dynamic equilibrium between the competing processes of grain growth and grain refinement. The alloy eliminates triple junctions by forming a set of smaller grains embedded into a larger matrix grain. It is predicted that, if a fully stabilized nanocrystalline state is realized experimentally, it will look very different from the conventional (unstable) nanocrystalline materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: nanoparticles nucleation surface interactions · Microstructure and mechanical properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
2. Mechanical behavior of microstructurally stable nanocrystalline alloys: Processing, properties, performance, and prospects10.1016/j.pmatsci.2025.101519 ↗
3. Gibbs · 1948
4. Grain boundary segregation, chemical ordering and stability of nanocrystalline alloys: Atomistic computer simulations in the Ni-W system10.1016/j.actamat.2007.03.024 ↗
5. Design of stable nano-crystalline alloys10.1126/science.1224737 ↗
6. Thermodynamics of stable nanocrystalline alloys: A Monte Carlo analysis10.1103/PhysRevB.89.064102 ↗
7. Stability criteria for nanocrystalline alloys10.1016/j.actamat.2017.03.029 ↗
8. Nanocrystalline materials at equilibrium: A thermodynamic review10.1007/s11837-015-1636-9 ↗
9. Stability criteria for nanocrystalline alloys10.1557/jmr.2017.188 ↗
10. Stability of binary nanocrystalline alloys against grain growth and phase separation10.1016/j.actamat.2012.12.033 ↗
11. Grain boundary segregation and thermodynamically stable binary nanocrystalline alloys10.1103/PhysRevB.79.094112 ↗
12. Stabilized nanocrystalline alloys: The intersection of grain boundary segregation with processing science10.1146/annurev-matsci-080819-121823 ↗
13. Stabilization of nanocrystalline grain sizes by solute additions10.1007/s10853-008-2870-0 ↗
14. Mitigating grain growth in binary nanocrystalline alloys through solute selection based on thermodynamic stability maps10.1016/j.commatsci.2013.10.018 ↗
15. Thermodynamic stabilization of nanocrystalline binary alloys10.1063/1.4791704 ↗
16. A predictive model for thermodynamic stability of grain size in nanocrystalline ternary alloys10.1063/1.4821040 ↗
17. Solute interaction effects on grain boundary segregation in ternary alloys10.1016/j.actamat.2018.09.005 ↗
18. Developing thermodynamic stability diagrams for equilibrium-grain-size binary alloys10.1016/j.matlet.2013.09.093 ↗
19. Stabilization of nanocrystalline alloys via grain boundary segregation: A diffuse interface model10.1016/j.actamat.2015.07.058 ↗
20. Grain boundary segregation in immiscible nanocrystalline alloys10.1016/j.actamat.2016.12.036 ↗
21. Grain boundary solute drag model in regular solution alloys10.1103/PhysRevLett.127.175503 ↗
22. The impurity-drag effect in grain boundary motion10.1016/0001-6160(62)90092-5 ↗
23. Solute segregation transition and drag force on grain boundaries10.1016/S1359-6454(03)00184-8 ↗
24. Drag effects on grain growth dynamics10.1016/j.commatsci.2012.10.012 ↗
25. Direct atomistic modeling of solute drag by moving grain boundaries10.1016/j.actamat.2020.07.052 ↗
26. Solute drag, solute trapping and diffusional dissipation of Gibbs energy10.1016/S1359-6454(99)00336-5 ↗
27. Comparison between solute drag and dissipation of gibbs energy by diffusion10.1016/S1359-6462(01)01022-3 ↗
28. Solute drag and dynamic phase transformations in moving grain boundaries10.1016/j.actamat.2019.08.046 ↗
29. The role of grain boundary diffusion in the solute drag effect10.3390/nano11092348 ↗
30. Solute drag assessment of grain boundary migration in Au10.1016/j.actamat.2021.117473 ↗
31. Transient solute drag in migrating grain boundaries10.1016/j.actamat.2011.06.049 ↗
32. Stochastic model and kinetic monte carlo simulation of solute interactions with stationary and moving grain boundaries. i. model formulation and application to one-dimensional systems
33. Stochastic model and kinetic monte carlo simulation of solute interactions with stationary and moving grain boundaries. ii. application to two-dimensional systems
34. The influence of particle shape on Zener drag10.1016/0956-7151(90)90177-I ↗
35. Zener pinning of grain boundaries and structural stability of immiscible alloys10.1007/s11837-016-1899-9 ↗
36. Five decades of the Zener equation10.2355/isijinternational.38.913 ↗
37. Highly parallel computer simulations of particle pinning: Zener vindicated10.1016/S1359-6462(00)00354-7 ↗
38. On the Zener drag10.1016/0001-6160(85)90214-7 ↗
39. More about Zener drag studies with Monte Carlo simulations10.1088/0965-0393/21/2/025007 ↗
40. Zener pinning by coherent particles: pinning efficiency and particle reorientation mechanisms10.1088/1361-651X/aa6cfb ↗
41. Atomistic modeling of capillary-driven grain boundary motion in Cu-Ta alloys10.1016/j.actamat.2018.01.027 ↗
42. Effect of Ta solute concentration on the microstructural evolution in immiscible Cu-Ta alloys10.1007/s11837-015-1643-x ↗
43. Prolonged high-temperature exposure: Tailoring nanocrystalline Cu–Ta alloys against grain growth10.1016/j.msea.2021.141818 ↗
44. Extreme creep resistance in a microstructurally stable nanocrystalline alloy10.1038/nature19313 ↗
45. Exceptional fatigue strength of a microstructurally stable bulk nanocrystalline alloy10.1016/j.actamat.2023.119049 ↗
46. Alloy thermodynamics in nano-structures10.1557/JMR.1994.0004 ↗
47. Alloy effects in nanostructures10.1016/0965-9773(93)90088-S ↗
48. Grain coarsening inhibited by solute segregation10.1016/S1359-6454(01)00338-X ↗
49. Nano-scale grain growth inhibited by reducing grain boundary energy through solute segregation10.1016/j.jcrysgro.2003.12.021 ↗
50. Reducing grain boundary, dislocation line and vacancy formation energies by solute segregation. I. Theoretical background10.1016/j.actamat.2007.05.047 ↗
51. Reducing grain boundary, dislocation line and vacancy formation energies by solute segregation. II. Experimental evidence and consequences10.1016/j.actamat.2007.05.033 ↗
52. Thermodynamic stabilization of nanocrystallinity10.1515/ijmr-2005-0196 ↗
53. Unexplored topics and potentials of grain boundary engineering10.1016/j.scriptamat.2005.11.047 ↗
54. Li · 2025
55. A model of thermodynamic stabilization of nanocrystalline grain boundaries in alloy systems10.1016/j.actamat.2024.120404 ↗
56. The potts model10.1103/RevModPhys.54.235 ↗
57. Frequency factors and isotope effects in solid state rate processes10.1016/0022-3697(57)90059-8 ↗
58. Kaur · 1995
59. Atomic-level mechanisms of short-circuit diffusion in materials10.1515/ijmr-2023-0202 ↗
60. A new algorithm for monte carlo simulation of ising spin systems10.1016/0021-9991(75)90060-1 ↗
61. Grain-boundary migration in the presence of diffusing impurities: simulations and analytical models10.1080/01418610108217146 ↗
62. Kink model for extended defect migration in the presence of diffusing impurities: theory and simulation10.1016/S1359-6454(01)00175-6 ↗
63. Monte carlo simulation of solute aggregation on domain boundaries in binary alloys: Domain-boundary segregation and domain growth10.1103/PhysRevB.58.633 ↗
64. Monte carlo simulation of solute aggregation in binary alloys: Domain boundary precipitation and domain growth10.1103/PhysRevB.60.7113 ↗
65. Static and dynamic critical phenomena of the two-dimensionalq-state Potts model10.1007/BF01007636 ↗
66. Study of phase transition of Potts model with Domain Adversarial Neural Network10.1016/j.physa.2023.128666 ↗
67. The self-dual point of the two-dimensional random-cluster model is critical for q≥110.1007/s00440-011-0353-8 ↗
68. Nanocrystalline materials at equilibrium: A thermodynamic review10.1007/s11837-015-1636-9 ↗