journal article·2025-05Open access

Metastable AlB2 structured TM-Si-B2±z (TM = Ti, Zr, Hf) solid solutions from first-principles

C. Gutschka, L. Zauner, T. Glechner, D. Holec, H. Riedl

Acta Materialia· Volume 289

Abstract

AlB 2 structured transition metal diborides are a class of refractory ceramics standing out through their high-temperature stability and exceptional mechanical properties, encouraging research on their bulk and thin film forms. In Physical Vapor Deposition (PVD), scientific interest has focused on growing metastable solid solutions with Si to enhance oxidative properties and fracture characteristics. However, theoretical investigations of such ternary compounds are still rare. Therefore, this study explores the structural, energetical, and mechanical properties of the Ti-Si-B 2 , Zr-Si-B 2 , and Hf-Si-B 2 structures, as well as their vacancy dynamics, with the help of Density Functional Theory (DFT). For all three systems, silicon prefers the boron sublattice and via structural analysis, metastable solubility limits of 24 at. %, 27 at. %, and 25 at. % of Si in Ti(Si,B) 2 , Zr(Si,B) 2 , and Hf(Si,B) 2 , could be established, respectively. An analysis of simulated XRD patterns, Radial Distribution Functions (RDFs), and Crystal Orbital Hamilton Populations (COHPs), attributed an observed destabilization of the AlB 2 -type symmetry to Si clustering. Simulated elastic properties revealed a decrease of the Young’s moduli with increasing silicon contents, reproducing experimental values up to 15 at. % Si. The study discovered a structural instability of ternary, metastable AlB 2 -type compounds concerning metal vacancies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: MXene and MAX Phase Materials · Boron and Carbon Nanomaterials Research · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Ultra-high temperature ceramics for extreme environments
2. Inherent anisotropy in transition metal diborides and microstructure/property tailoring in ultra-high temperature ceramics—A review10.1016/j.jeurceramsoc.2017.09.012 ↗
3. Review of transition-metal diboride thin films10.1016/j.vacuum.2021.110567 ↗
4. The crystal structures of molybdenum and tungsten borides10.3891/acta.chem.scand.01-0893 ↗
5. General trends in electronic structure, stability, chemical bonding and mechanical properties of ultrahigh temperature ceramics TMB2 (TM= transition metal)10.1016/j.jmst.2014.09.014 ↗
6. A position-space view on chemical bonding in metal diborides with AlB2 type of crystal structure10.1002/zaac.201200523 ↗
7. Electronic structure, bonding, and ground-state properties of AlB2-type transition-metal diborides10.1103/PhysRevB.63.045115 ↗
8. Self-organized nanocolumnar structure in superhard TiB2 thin films10.1063/1.1887824 ↗
9. Structure, composition, and mechanical properties of thin films of transition metals diborides10.3103/S1063457615060076 ↗
10. Borides in thin film technology10.1006/jssc.1997.7456 ↗
11. Tissue phase affected fracture toughness of nano-columnar TiB2+z thin films10.1080/21663831.2023.2204120 ↗
12. Improved oxidation properties from a reduced B content in sputter-deposited TiBx thin films10.1016/j.surfcoat.2021.127353 ↗
13. Influence of the non-metal species on the oxidation kinetics of Hf, HfN, HfC, and HfB2 coatings10.1016/j.matdes.2021.110136 ↗
14. Oxidation kinetics of overstoichiometric TiB2 thin films grown by DC magnetron sputtering10.1016/j.corsci.2022.110493 ↗
15. Influence of Ta on the oxidation resistance of WB2−z coatings10.1016/j.jallcom.2020.158121 ↗
16. Oxidation of ultra-high temperature transition metal diboride ceramics10.1179/1743280411Y.0000000012 ↗
17. Resistance to thermal shock and to oxidation of metal diborides–SiC ceramics for aerospace application10.1111/j.1551-2916.2007.01589.x ↗
18. Influence of the Al concentration in Ti-Al-B coatings on microstructure and mechanical properties using combinatorial sputtering from a segmented TiB2/AlB2 target10.1016/j.surfcoat.2019.02.060 ↗
19. Properties of spark plasma sintered compacts and magnetron sputtered coatings made from Cr, Mo, Re and Zr alloyed tungsten diboride10.3390/coatings11111378 ↗
20. Superhard oxidation-resistant Ti1−xAlxBy thin films grown by hybrid HiPIMS/DCMS co-sputtering diboride targets without external substrate heating10.1016/j.matdes.2024.112727 ↗
21. Thermal stability and mechanical properties of sputtered (Hf, Ta, V, W, Zr)-diborides10.1016/j.actamat.2020.09.018 ↗
22. High-entropy ceramic thin films; A case study on transition metal diborides10.1016/j.scriptamat.2018.02.008 ↗
23. Age hardening in superhard ZrB2-rich Zr1−xTaxBy thin films10.1016/j.scriptamat.2020.09.026 ↗
24. Exploring the potential for simultaneous enhancement of mechanical, wear and corrosion performance of the CrB2 protective film actuated by soluting Si10.1016/j.ceramint.2023.08.181 ↗
25. Structure evolution and mechanical properties of co-sputtered Zr-Al-B2 thin films10.1116/6.0001802 ↗
26. Multifunctional ZrB2-rich Zr1−xCrxBy thin films with enhanced mechanical, oxidation, and corrosion properties10.1016/j.vacuum.2020.109990 ↗
27. Electron-configuration stabilized (W, Al)B2 solid solutions10.1016/j.actamat.2019.05.056 ↗
28. Synthesis and oxidation behavior of Ti0.35Al0.65By (y= 1.7-2.4) coatings
29. Improving the high-temperature oxidation resistance of TiB2 thin films by alloying with Al10.1016/j.actamat.2020.07.025 ↗
30. High-temperature oxidation resistance of ternary and quaternary Cr-(Mo)-Si-B2−z coatings—Influence of Mo addition10.1016/j.surfcoat.2023.129733 ↗
31. Quaternary diborides—improving the oxidation resistance of TiB2±z coatings by disilicide alloying10.1080/21663831.2023.2225554 ↗
32. Thermodynamic prediction of metastable coating structures in PVD processes
33. Metastable coatings—Prediction of composition and structure10.1016/0257-8972(88)90145-4 ↗
34. Advanced concepts of PVD hard coatings10.1016/0042-207X(90)94229-J ↗
35. Formation of non-equilibrium phases in the PVD process10.1016/0042-207X(92)90044-W ↗
36. Structure, mechanical properties, and oxidation resistance of ZrB2, ZrSiB, and ZrSiB/SiBC coatings10.1134/S207020511806014X ↗
37. Effect of Si addition on mechanical properties and high temperature oxidation resistance of Ti-B-Si hard coatings10.1016/j.surfcoat.2013.12.011 ↗
38. Oxidation resistance of Si doped transition metal diborides at elevated temperatures10.1016/j.ijrmhm.2023.106172 ↗
39. Influence of Si segregates on the structural evolution, mechanical properties, and high-temperature fracture toughness of Cr-Si-B2±z coatings10.1016/j.jallcom.2023.170354 ↗
40. Role of Si segregation in the structural, mechanical, and compositional evolution of high-temperature oxidation resistant Cr-Si-B2±z thin films10.1016/j.jallcom.2023.169203 ↗
41. Influence of Si on the oxidation behavior of TM-Si-B2±z coatings (TM=Ti, Cr, Hf, Ta, W)10.1016/j.surfcoat.2022.128178 ↗
42. High temperature oxidation resistance of physical vapor deposited Hf-Si-B2±z thin films10.1016/j.corsci.2022.110413 ↗
43. First principles calculation of electronic structure, bonding and chemical stability of TiB2, NbB2 and their ternary alloy Ti0. 5Nb0. 5B210.1016/j.physb.2009.09.061 ↗
44. Theoretical study on mechanical and electronic properties of ternary diborides Sc0. 5V0. 5B2, Sc0. 5Nb0. 5B2 and Sc0. 5Ta0. 5B2
45. Phase stability, mechanical and thermodynamic properties of (Hf, Zr, Ta, M) B2 (M=Nb, Ti, Cr, W) quaternary high-entropy diboride ceramics via first-principles calculations10.1016/j.ceramint.2023.08.034 ↗
46. Design of superhard high-entropy diborides via high-throughput DFT and thermodynamics calculations
47. Ab initio inspired design of ternary boride thin films10.1038/s41598-018-27426-w ↗
48. Solid solubility effect on properties of titanium diboride10.1111/j.1151-2916.1987.tb05630.x ↗
49. Transition metal diboride-silicon carbide-boron carbide ceramics with super-high hardness and strength10.1016/j.jeurceramsoc.2022.08.019 ↗
50. High-entropy ultra-high-temperature borides and carbides: a new class of materials for extreme environments10.1146/annurev-matsci-080819-121217 ↗
51. Solid state reactions in transition metal diboride-based materials
52. Theoretical and experimental study of combustion synthesis of microgradient ULTRA high-temperature ceramics in Zr-Ta-Si-B system10.1016/j.jeurceramsoc.2021.03.008 ↗
53. Designing thin film materials—Ternary borides from first principles10.1016/j.tsf.2015.03.035 ↗
54. A theoretical investigation of mixing thermodynamics, age-hardening potential and electronic structure of ternary M1 1−xM2 xB2 alloys with AlB2 type structure10.1038/srep09888 ↗
55. Isothermal section of the Ti-Si-B system at 1250°C in the Ti-TiSi2-TiB2 region10.1590/S1516-14392013005000172 ↗
56. Thermodynamic modeling and experimental investigation of the Ti-rich corner of the Ti–Si–B system10.1016/j.intermet.2005.02.001 ↗
57. Phase equilibria in the Zr-Si-B ternary system (Zr-Si-ZrB2 region) at 1173 K10.3139/146.111547 ↗
58. Liquidus projection of the Zr-Si-B ternary system10.1007/s11669-020-00787-4 ↗
59. The effect of refractory metal substitution on the stability of Mo (ss)+ T2 two-phase field in the Mo–Si–B system10.1016/S0263-4368(00)00030-5 ↗
60. Structural materials: metal–silicon–boron: on the melting behavior of Mo–Si–B alloys10.1016/S0925-8388(02)00676-X ↗
61. Thermodynamic modeling of the V-Si-B system10.1016/j.calphad.2017.10.001 ↗
62. Thermodynamic modelling of the V–Ti–B system10.1016/j.calphad.2022.102477 ↗
63. Experimental investigation and thermodynamic modeling of Hf–Si–B system10.1016/j.jallcom.2010.01.050 ↗
64. Microstructure and oxidation behavior of Nb–Mo–Si–B alloys10.1016/j.intermet.2005.03.007 ↗
65. Thermodynamic modeling of the Nb-rich corner in the Nb–Si–B system10.1016/j.intermet.2010.09.003 ↗
66. Assessment of the Cr-B system and extrapolation to the Ni-Al-Cr-B quaternary system10.1016/S0364-5916(02)00058-5 ↗
67. T2 phase site occupancies in the Cr–Si–B system: a combined synchroton-XRD/first-principles study10.1016/j.scriptamat.2021.113854 ↗
68. Experimental determination of liquidus projection in the Cr rich region of the Cr-Si-B system10.1016/j.jallcom.2018.09.139 ↗
69. Multiphase equilibria in the metal-rich region of the Mo–Ti–Si–B system: thermodynamic prediction and experimental validation10.1016/j.actamat.2004.12.020 ↗
70. From Mo-Si-B to Mo-Ti-Si-B alloys: A short review10.3390/ma16010003 ↗
71. Thermodynamics of solid transition-metal silicides10.1021/cr00102a003 ↗
72. Transition metal silicides: fundamentals, preparation and catalytic applications10.1039/C9CY00533A ↗
73. Impact of vacancies on structure, stability and properties of hexagonal transition metal diborides, MB2 (M=Sc, Y, Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, W, Mn, and Fe)10.1016/j.mtla.2022.101629 ↗
74. Phase diagram and mechanical properties of fifteen quaternary high-entropy metal diborides: First-principles calculations and thermodynamics10.1063/5.0079808 ↗
75. Theoretical prediction and synthesis of a family of atomic laminate metal borides with in-plane chemical ordering10.1021/jacs.0c08113 ↗
76. Special quasirandom structures10.1103/PhysRevLett.65.353 ↗
77. Models of configurationally-complex alloys made simple10.1016/j.cpc.2023.108664 ↗
78. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
79. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
80. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
81. 2024
82. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
83. High-precision sampling for Brillouin-zone integration in metals10.1103/PhysRevB.40.3616 ↗
84. Geometry optimization of periodic systems using internal coordinates10.1063/1.1864932 ↗
85. Structure and mechanical properties of reactive and non-reactive sputter deposited WC based coatings10.1016/j.jallcom.2021.161129 ↗
86. Measurement of thin film mechanical properties using nanoindentation10.1557/S0883769400041634 ↗
87. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
88. VESTA: a three-dimensional visualization system for electronic and structural analysis10.1107/S0021889808012016 ↗
89. Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis10.1016/j.commatsci.2012.10.028 ↗
90. pyscal: A python module for structural analysis of atomic environments10.21105/joss.01824 ↗
91. Crystal orbital Hamilton populations (COHP): energy-resolved visualization of chemical bonding in solids based on density-functional calculations10.1021/j100135a014 ↗
92. Crystal orbital Hamilton population (COHP) analysis as projected from plane-wave basis sets10.1021/jp202489s ↗
93. Analytic projection from plane-wave and PAW wavefunctions and application to chemical-bonding analysis in solids10.1002/jcc.23424 ↗
94. Maintz · 2016
95. Calculations of single-crystal elastic constants made simple10.1016/j.cpc.2009.11.017 ↗
96. The closest elastic tensor of arbitrary symmetry to an elasticity tensor of lower symmetry10.1007/s10659-006-9082-0 ↗
97. Computation of the yield point of mixed crystals due to hiring for single crystals
98. Average elastic constants and tensor invariants10.1002/pssa.2210990212 ↗
99. Structural stability and mechanical properties of TiAl+Mo alloys: A comprehensive ab initio study10.1016/j.actamat.2021.117427 ↗
100. XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗