Constructing high-performance bulk thermoelectric composites by incorporating uniformly dispersed fullerene sub-nanoclusters
Source abstract
Abstract
Sub-nanomaterials possess unprecedented size-dependent properties compared to conventional nanomaterials, which endow them with great potential in catalysis, biomedicine, sensors, and so on. However, their applications in thermoelectrics are unknown due to poor thermal stability and low yields. Herein, we construct a series of thermoelectric composites by incorporating highly thermally stable and commercial fullerene sub-nanoclusters (C 60 or C 70). We find that sub-nanoclusters as the second phase can conduce to optimized carrier concentration through charge transfer at interfaces while the carrier mobility is significantly enhanced due to atom orbital hybridization and size-dependent electrical scattering mechanism. Furthermore, the ultra-low thermal conductivity of C 60 due to its distorted chemical bonding and sub-nanometer pore, and the interfacial thermal resistance greatly suppress the phonon transport. Consequently, the 0.15 mol.% C 60/Bi 0.4Sb 1.6Te 3 realizes an ultra-high ZT of ∼1.6 at 373 K, an excellent thermoelectric conversion efficiency of ∼7.4 %, and a huge cooling performance of ∼73 K. This work demonstrates the application of sub-nanomaterials in thermoelectrics and may shed light on other fields such as electronic devices, thermal management, and fullerene chemistry.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Graphene research and applications · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Strong crystal size effect on deformation twinning10.1038/nature08692 ↗
2. Size effects on the fracture of microscale and nanoscale materials10.1038/s41578-018-0029-4 ↗
3. Size induced ferroelectricity in antiferroelectric oxide membranes
4. Structure sensitivity of acetylene semi-Hydrogenation on Pt Single Atoms and subnanometer clusters10.1021/acscatal.9b02840 ↗
5. Chemistry and properties at a sub-nanometer scale10.1039/C6SC00432F ↗
6. Quantum materials exploration by sequential screening technique of heteroatomicity10.1021/jacs.0c06653 ↗
7. Manganese(II)-guided separation in the sub nanometer regime for precise identification of in vivo size dependence10.1002/anie.202214720 ↗
8. Thermoelectric cooling materials10.1038/s41563-020-00852-w ↗
9. Complex thermoelectric materials10.1038/nmat2090 ↗
10. Advances in Ag2Se-based thermoelectrics from materials to applications10.1039/D3EE00378G ↗
11. Thermoelectrics: from history, a window to the future10.1016/j.mser.2018.09.001 ↗
12. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
13. Valence disproportionation of GeS in the PbS matrix forms Pb5Ge5S12 inclusions with conduction band alignment leading to high n-Type thermoelectric performance10.1021/jacs.2c01706 ↗
14. New directions for low-dimensional thermoelectric materials10.1002/adma.200600527 ↗
15. Significant enhancement of thermoelectric figure of merit in BiSbTe-based composites by incorporating carbon microfiber10.1002/adfm.202008851 ↗
16. Synergistic effect of work function and acoustic impedance mismatch for improved thermoelectric performance in GeTe-WC composite10.1021/acsami.2c11369 ↗
17. Ultra-high thermoelectric performance in graphene incorporated Cu2Se: role of mismatching phonon modes10.1016/j.nanoen.2018.09.041 ↗
18. Cluster-nuclei coassembled one-dimensional subnanometer heteronanostructures10.1021/acs.nanolett.1c03936 ↗
19. The sub-nanometer scale as a new focus in nanoscience10.1002/adma.201802031 ↗
20. Covalent fullerene chemistry10.1126/science.271.5247.317 ↗
21. Synthesis of a monolayer fullerene network10.1038/s41586-022-04771-5 ↗
22. Single-molecule fullerenes: current stage and perspective10.1021/acsmaterialslett.2c00247 ↗
23. R. E., C60: buckminsterfullerene10.1038/318162a0 ↗
24. Ambient-pressure synthesis of ethylene glycol catalyzed by C60-buffered Cu/SiO210.1126/science.abm9257 ↗
25. Ultralow thermal conductivity of fullerene derivatives10.1103/PhysRevB.88.075310 ↗
26. Spectral contributions to the thermal conductivity of C60 and the fullerene derivative PCBM10.1021/acs.jpclett.7b00609 ↗
27. Contributions of different degrees of freedom to thermal transport in the C60 molecular crystal10.1103/PhysRevB.97.104303 ↗
28. Fullerene rotational dynamics generate disordered configurations that suppress thermal conductivity in superatomic crystals10.1039/D0NH00358A ↗
29. Promising and eco-friendly Cu2X-based thermoelectric materials: progress and applications10.1002/adma.201905703 ↗
30. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
31. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
32. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
33. First principles phonon calculations in materials science10.1016/j.scriptamat.2015.07.021 ↗
34. Enhanced thermoelectric performance of P-Type (Bi,Sb)2Te3 by incorporating non-stoichiometric Ag5Te3 and refining Te-Se ratio
35. Enhanced thermoelectric and mechanical properties of Bi0.5Sb1.5Te3 alloy with dispersed yttrium oxide ceramic nanoparticles10.1007/s12598-023-02576-7 ↗
36. Gradient nanotwins and enhanced weighted mobility synergistically upgrade Bi0.5Sb1.5Te3 thermoelectric and mechanical performance10.1002/adfm.202315591 ↗
37. Highly effective solid solution towards high thermoelectric and mechanical performance in Bi-Sb-Te alloys via trojan doping10.1039/D4EE00132J ↗
38. Fabrication and excellent performances of bismuth telluride-based thermoelectric devices10.1021/acsami.1c24627 ↗
39. High performance BiSbTe alloy for superior thermoelectric cooling
40. 3D Printing of highly textured bulk thermoelectric materials: mechanically robust BiSbTe alloys with superior performance10.1039/C9EE02044F ↗
41. Next-generation thermoelectric cooling modules based on high-performance Mg3(Bi,Sb)2 material10.1016/j.joule.2021.11.008 ↗
42. Tunable electrical properties of C60·m-xylene and the formation of semiconducting ordered amorphous carbon clusters under pressure10.1007/s12274-022-4092-1 ↗
43. Effect of processing route on the microstructure and thermoelectric properties of bismuth telluride-based alloys10.1007/s11664-009-1051-5 ↗
44. Enhanced thermoelectric performance of Cu2SnSe3-based composites incorporated with nano-fullerene10.3390/ma9080629 ↗
45. High thermoelectric performance in Te-free (Bi,Sb)2Se3 via structural transition induced band convergence and chemical bond softening10.1039/C6EE02674E ↗
46. Histamine sensing by boron and silicon doped C60 fullerenes: a first principles investigation10.1016/j.diamond.2023.110471 ↗
47. Co3O4 nanocrystals on graphene as a synergistic catalyst for oxygen reduction reaction10.1038/nmat3087 ↗
48. Bulk electronic structure of K3C60 as revealed by soft x-rays10.1103/PhysRevB.75.195432 ↗
49. A first-principles study of 1D and 2D C60 nanostructures: strain effects on band alignments and carrier mobility10.1088/1361-648X/acc4a3 ↗
50. Realizing nearly-free-electron like conduction band in a molecular film through mediating intermolecular van der Waals interactions10.1038/s41467-019-11300-y ↗
51. Controllable synthesis of CoFe2Se4/NiCo2Se4 hybrid nanotubes with heterointerfaces and improved oxygen evolution reaction performance10.1039/D1NR00406A ↗
52. All-scale hierarchical thermoelectrics: MgTe in PbTe facilitates valence band convergence and suppresses bipolar thermal transport for high performance10.1039/c3ee42187b ↗
53. Thermal diffusivity of isotopically enriched 12C diamond10.1103/PhysRevB.42.1104 ↗
54. Hybrids of fullerenes and 2D nanomaterials
55. High thermal conductivity phase change composite with percolating carbon fiber network10.1016/j.apenergy.2015.05.042 ↗
56. Lattice thermal conductivity of graphene flakes: comparison with bulk graphite10.1063/1.3136860 ↗
57. High efficiency Bi2Te3-based materials and devices for thermoelectric power generation between 100 and 300 °C10.1039/C6EE02017H ↗
58. High ZT in p-type thermoelectric (Bi,Sb)2Te3 with built-in nanopores10.1039/D2EE00119E ↗
59. High thermoelectric performance of p-BiSbTe compounds prepared by ultra-fast thermally induced reaction10.1039/C7EE02677C ↗
60. Organic/Inorganic hybrid design as a route for promoting the Bi0.5Sb1.5Te3 for high-performance thermoelectric power generation10.1002/adfm.202200307 ↗
61. High thermoelectric performance in Bi0.46Sb1.54Te3 nanostructured with ZnTe10.1039/C8EE00290H ↗
62. Infinite coordination polymer for enhancing the thermoelectric performance of Bi0.5Sb1.5Te3 for low-grade waste heat recovery
63. High-performance industrial-grade p-Type (Bi,Sb)2Te3 thermoelectric enabled by a stepwise optimization strategy10.1002/adma.202300338 ↗