journal article·2025-07

Acid-assisted hydration of a membrane electrode assembly to enhance the performance and stability of proton exchange membrane water electrolysis

Penglin Yang, Jian Huang, Fang Chen, Barbara Mecheri, Alessandra D’ Epifanio, Enrico Traversa, Jie Song, Guizhi Xu, Jun Li, Xun Zhu, Qiang Liao

Publisher page

Abstract

The membrane electrode assembly (MEA) used in proton exchange membrane water electrolysis (PEMWE) must be conditioned before operation. However, conventional hydration-based conditioning methods are time-consuming and energy-intensive. These methods do not entirely condition the MEA and can induce an uneven stress distribution in the catalyst layer (CL) surface, deteriorating the operational stability. In this study, an efficient acid-assisted conditioning method for MEA is introduced to enhance the performance and stability of PEMWE. Subjecting an MEA to optimized acid-assisted hydration produces a substantially higher current density (by up to 19.9 %) than that of conventional MEA—surpassing the 2025 technical target set by the U.S. Department of Energy of 3.0 A cm−2 at 1.90 V. Acid-assisted hydration minimizes mass transfer losses by improving the proton conductivity and hydrophilicity of the anode CL via modulation of the aggregation state of the ionomer in the CL. The enhanced proton conductivity and hydration of the proton exchange membrane reduces the ohmic loss. The proposed approach also enhances the PEMWE stability, which is attributed to the uniform stress distribution on the CL surface of the acid-conditioned MEA. A short, energy- and cost-efficient, and practical conditioning protocol for PEMWE is provided in this study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Perspectives on current and future iridium demand and iridium oxide catalysts for PEM water electrolysis10.1016/j.cattod.2023.114140 ↗
2. Rational electrode design for low-cost proton exchange membrane water electrolyzers
3. High performance and durable anode with 10‐fold reduction of iridium loading for proton exchange membrane water electrolysis10.1002/aenm.202204169 ↗
4. Enhancing proton exchange membrane water electrolysis performance: impact of iridium oxide catalyst ink dispersing methodology10.1016/j.jpowsour.2024.234543 ↗
5. Ultrathin microporous transport layers: implications for low catalyst loadings, thin membranes, and high current density operation for proton exchange membrane electrolysis10.1002/aenm.202302786 ↗
6. Insights into the effect of drying temperature on catalyst layer structure and PEM water electrolysis performance10.1016/j.ijhydene.2023.10.108 ↗
7. Comparative study of on‐line membrane electrode assembly activation procedures in proton exchange membrane fuel cell10.1002/fuce.201200139 ↗
8. Activation mechanisms in the catalyst coated membrane of PEM fuel cells10.1016/j.pecs.2021.100924 ↗
9. Impact of intermittent operation on lifetime and performance of a pem water electrolyzer10.1149/2.0421908jes ↗
10. How the porous transport layer interface affects catalyst utilization and performance in polymer electrolyte water electrolysis10.1021/acsami.3c04151 ↗
11. Integrated-channel porous transport layers reduce ohmic and mass transport losses in polymer electrolyte membrane electrolyzers
12. The role of flow-field layout on the conditioning of a proton exchange membrane fuel cell10.1016/j.fuel.2018.05.062 ↗
13. Hierarchically structured porous transport layers for polymer electrolyte water electrolysis
14. Impact of power profile on activation of proton exchange membrane electrolyzer cell10.1016/j.jpowsour.2025.236308 ↗
15. Communication—Contribution of catalyst layer proton transport resistance to voltage loss in polymer electrolyte water electrolyzers10.1149/2.0031815jes ↗
16. Proton transport in catalyst layers of a polymer electrolyte water electrolyzer: effect of the anode catalyst loading10.1149/2.0341904jes ↗
17. Impact of substrate and processing on confinement of nafion thin films10.1002/adfm.201304311 ↗
18. Aging gracefully? Investigating iridium oxide ink's impact on microstructure, catalyst/ionomer interface, and PEMWE performance10.1016/j.jpowsour.2023.233503 ↗
19. Tuning the ionomer distribution in the fuel cell catalyst layer with scaling the ionomer aggregate size in dispersion10.1021/acsami.8b01751 ↗
20. Influence of equivalent weight of ionomer on proton conduction behavior in fuel cell catalyst layers10.1149/2.0451912jes ↗
21. Fuel cell catalyst layers: a polymer science perspective10.1021/cm401445h ↗
22. Influence of acid pretreatment on ionic conductivity of nafion® membranes10.1016/j.memsci.2015.11.022 ↗
23. A review on progress in the field of conditioning of polymer fuel cell stacks10.1016/j.jpowsour.2024.235300 ↗
24. Activation methods and underlying performance boosting mechanisms within fuel cell catalyst layer10.1016/j.esci.2024.100254 ↗
25. Insights into the influence of different pre-treatments on physicochemical properties of nafion XL membrane and fuel cell performance10.3390/polym14163385 ↗
26. Preparation, characterization, and electrochemical properties investigation of recycled proton exchange membrane for fuel cell applications10.1016/j.energy.2018.07.123 ↗
27. Influence of iridium oxide loadings on the performance of PEM water electrolysis cells: part I–Pure IrO2-based anodes10.1016/j.apcatb.2015.09.013 ↗
28. Determining proton transport in pseudo catalyst layers using hydrogen pump DC and AC techniques10.1149/1945-7111/ab927d ↗
29. Pivovar · 2021
30. Analysis of voltage losses in PEM water electrolyzers with low platinum group metal loadings10.1149/2.0641805jes ↗
31. Femtosecond laser-induced surface structuring of the porous transport layers in proton exchange membrane water electrolysis10.1039/C9TA12127G ↗
32. Effect of pretreatment on microstructure and mechanical properties of nafion™ XL composite membrane10.1002/fuce.201900064 ↗
33. Performance improvement induced by membrane treatment in proton exchange membrane water electrolysis cells10.1016/j.ijhydene.2021.11.227 ↗
34. Enhancement of service life of polymer electrolyte fuel cells through application of nanodispersed ionomer10.1126/sciadv.aaw0870 ↗
35. Effect of acid treatment on the physico-chemical properties of Nafion 117 membrane10.1016/j.ijhydene.2022.04.246 ↗
36. Water‐sorption and transport properties of Nafion 117 H10.1002/app.1993.070500816 ↗
37. Short-side-chain perfluorinated polymeric membranes annealed at high temperature: structure, conductivity, and fuel cell performance10.1016/j.ijhydene.2024.09.004 ↗
38. Influence of ionomer content in IrO2/TiO2 electrodes on PEM water electrolyzer performance10.1149/2.0231611jes ↗
39. Strategies to accelerate bubble detachment for efficient hydrogen evolution10.1016/j.cclet.2023.108351 ↗
40. Overall design of novel 3D-ordered MEA with drastically enhanced mass transport for alkaline electrolyzers10.1039/D2EE00273F ↗
41. Patterned colloidal deposition controlled by electrostatic and capillary forces10.1103/PhysRevLett.84.2997 ↗
42. Iridium surface oxide affects the Nafion interface in proton-exchange-membrane water electrolysis10.1021/acsenergylett.4c01508 ↗
43. Electrospinning of SiO2-based composites embedded TiO2 nanoparticles with ultra-strong suppression of radiative heat transfer10.1016/j.jallcom.2023.170331 ↗
44. Combined effects of water temperature and chemistry on the environmental fate and behavior of nanosized zinc oxide10.1016/j.scitotenv.2014.07.082 ↗
45. Early-stage performance degradation mechanisms of proton-exchange membrane water electrolysis under high operating current densities10.1016/j.fuel.2025.134344 ↗