High-performance zinc anodes enabled by atmospheric plasma enhanced cellulose protective layer for zinc ion batteries
Source abstract
Abstract
Zinc (Zn) anode suffers from poor surface stability caused by Zn dendrite formation and side reactions, which hinder the development of aqueous zinc ion batteries (ZIBs) for clean and safe energy storage. Conventional interfacial layers based on polymetric and bioderived materials may be subjected to uneven ion transport and week structural integrity during cycling. Herein, a scalable and facile atmospheric plasma (AP)-based approach is proposed and systematically studied to improve the electrochemical performance of Zn interfacial layers via plasma induced surface modification. Instrumental characterization in conjunction with ion flow simulation indicate that AP modified cellulose-based Zn artificial layer with more negatively charged surface and improved mechanical property exhibits significantly enhanced cycling stability and dendritic suppression capability, leading to an improved cycling stability of more than 1000 h at a current density of 10 mA cm −2 for 1 mA h cm −2 for Zn anode with such interfacial layer. Moreover, the versatility of the AP treatment can also be extended to other polymers such as polyvinylidene fluoride (PVDF) and polyvinyl alcohol (PVA). As a result, the full cells using AP-treated Zn anodes exhibit outstanding cycling stability for more than 1500 cycles. This work offers a scalable and facile surface treatment solution to improve the surface stability of Zn anodes. A novel method to enhance the surface stability of Zn anodes for reducing the dendrite growth was reported. This approach not only enhances the stability of cellulose nanocrystal (CNC) as an artificial protective layer on the surface of zinc anodes, improving the cyclic performance, but also transcends the traditional requirement for a vacuum environment in plasma treatment. This significant advancement greatly reduces the complexity and cost of production. This technique also holds potential for wide-raging applications. • Atmospheric plasma (AP) was introduced to modify Zn protective layers. • AP-modified cellulose nanocrystal layer shows enhanced surface stability. • Ion diffusion simulation results reveal the uniform Zn ion transport. • The versatility of AP treatment was demonstrated. • AP-modified Zn anodes exhibit good electrochemical performance in symmetric and full cells.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced battery technologies research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Gradient design of imprinted anode for stable Zn-ion batteries10.1038/s41467-023-36386-3 ↗
2. Recent advances in Zn‐ion batteries10.1002/adfm.201802564 ↗
3. Engineering interfacial layers to enable Zn metal anodes for aqueous zinc-ion batteries10.1016/j.ensm.2021.09.012 ↗
4. Interfacial modification of lithium metal anode by boron nitride nanosheets
5. Dendrite-free zinc deposition enabled by MXene/nylon scaffold and polydopamine solid-electrolyte interphase for flexible zinc-ion batteries
6. Zn metal anodes for Zn-ion batteries in mild aqueous electrolytes: challenges and strategies10.3390/nano11102746 ↗
7. Rechargeable aqueous zinc-ion batteries: mechanism, design strategies and future perspectives10.1016/j.mattod.2020.08.021 ↗
8. A liquid metal assisted dendrite-free anode for high-performance Zn-ion batteries10.1039/D0TA11828A ↗
9. 3D printing architecting reservoir‐integrated anode for dendrite‐free, safe, and durable Zn batteries10.1002/aenm.202103708 ↗
10. Long lifespan and high-rate Zn anode boosted by 3D porous structure and conducting network10.1016/j.jpowsour.2020.228808 ↗
11. A review on 3D zinc anodes for zinc ion batteries10.1002/smtd.202200597 ↗
12. Promoting Zn2+ migration through polar perovskite dielectric layer on Zn metal anode for the enhanced aqueous Zn-ion batteries10.1016/j.cej.2023.142308 ↗
13. Ion diffusion-directed assembly of an artificial electronic–ionic conductor layer with Zn-ion selective channels for highly reversible zinc anodes
14. Polypyrrole-controlled plating/stripping for advanced zinc metal anodes
15. Uniformizing the electric field distribution and ion migration during zinc plating/stripping via a binary polymer blend artificial interphase10.1039/D0TA05253A ↗
16. Highly robust zinc metal anode directed by organic–inorganic synergistic interfaces for wearable aqueous zinc battery10.1002/smm2.1212 ↗
17. C. Li, X. Zhang, G. Qu, S. Zhao, H. Qin, D. Li, N. Li, C. Wang, X. Xu, Highly Reversible Zn Metal Anode Securing by Functional Electrolyte Modulation, Adv. Energy Mater 2400872..
18. Electrode/electrolyte interfacial chemistry modulated by chelating effect for high‐performance zinc anode10.1002/eem2.12608 ↗
19. Stabling zinc metal anode with polydopamine regulation through dual effects of fast desolvation and ion confinement
20. Covalent organic framework with 3D ordered channel and multi-functional groups endows Zn anode with superior stability10.1007/s40820-023-01278-0 ↗
21. Separator designs for aqueous zinc-ion batteries
22. Mechanistic study of interfacial modification for stable Zn anode based on a thin separator10.1002/smll.202201045 ↗
23. Amphoteric cellulose‐based double‐network hydrogel electrolyte toward ultra‐stable Zn anode10.1002/ange.202217833 ↗
24. Pretreatments of natural fibers and their application as reinforcing material in polymer composites—a review10.1002/pen.21328 ↗
25. Interfacial design of dendrite‐free zinc anodes for aqueous zinc‐ion batteries10.1002/anie.202000162 ↗
26. Free-radical-induced grafting from plasma polymer surfaces10.1021/acs.chemrev.5b00634 ↗
27. An introduction to free radical biochemistry10.1093/oxfordjournals.bmb.a072625 ↗
28. Non-thermal plasma treatment of textiles10.1016/j.surfcoat.2007.12.027 ↗
29. Foundations of plasma surface functionalization of polymers for industrial and biological applications10.1088/1361-6595/ac70f9 ↗
30. Plasma surface treatment to improve surface charge accumulation and dissipation of epoxy resin exposed to DC and nanosecond-pulse voltages10.1088/1361-6463/aa829b ↗
31. A review of vat photopolymerization technology: materials, applications, challenges, and future trends of 3D printing10.3390/polym13040598 ↗
32. Plasma activation of polyethylene powder10.3390/polym12092099 ↗
33. Advanced zinc anode with nitrogen‐doping interface induced by plasma surface treatment10.1002/advs.202103952 ↗
34. Investigating the influence of plasma treated polyethylene powder, carbon fibers in enhancing the mechanical properties of polymer composites using rotomoulding method10.1002/pc.27150 ↗
35. Cholesteric liquid crystals for color information technology10.1002/1521-4095(200108)13:15<1135::AID-ADMA1135>3.0.CO;2-S ↗
36. Techniques for determining contact angle and wettability of powders10.1016/j.powtec.2015.10.002 ↗
37. Innovative two-phase air plasma activation approach for green and efficient functionalization of nanofibrillated cellulose surfaces from wheat straw10.1016/j.jclepro.2021.126664 ↗
38. Multi-functionalized cellulosic biomass by plasma-assisted bonding of α-amino carboxylic acid to enhance the removal of ibuprofen in aqueous solution10.1007/s10924-020-01958-7 ↗
39. Improvement in adhesion of cellulose fibers to the thermoplastic starch matrix by plasma treatment modification10.1016/j.compositesb.2018.11.048 ↗
40. A dual‐functional organic electrolyte additive with regulating suitable overpotential for building highly reversible aqueous zinc ion batteries10.1002/adfm.202214538 ↗
41. Revealing the two‐dimensional surface diffusion mechanism for zinc dendrite formation on zinc anode10.1002/smll.202104148 ↗
42. Fast ion diffusion alloy layer facilitating 3D mesh substrate for dendrite-free zinc-ion hybrid capacitors10.1016/j.jechem.2022.06.028 ↗
43. Dendrite-free zinc deposition enabled by MXene/nylon scaffold and polydopamine solid-electrolyte interphase for flexible zinc-ion batteries
44. Reliable lateral Zn deposition along (002) plane by oxidized PAN separator for zinc-ion batteries10.1039/D3RA05177C ↗
45. Ionic-cellulose-adhesive modulated aqueous electrolyte enables water-poor and stable anion-derived electrolyte interphase for durable and dendrite-free zinc metal batteries10.1016/j.nanoen.2023.109094 ↗
46. Electrolyte design for in situ construction of highly Zn2+‐conductive solid electrolyte interphase to enable high‐performance aqueous Zn‐ion batteries under practical conditions10.1002/adma.202007416 ↗
47. Aqueous rechargeable zinc/sodium vanadate batteries with enhanced performance from simultaneous insertion of dual carriers10.1038/s41467-018-04060-8 ↗
48. Ion sieve interface assisted zinc anode with high zinc utilization and ultralong cycle life for 61 Wh/kg mild aqueous pouch battery10.1021/acsnano.3c11115 ↗
49. Anode surface engineering of zinc-ion batteries using tellurium nanobelt as a protective layer for enhancing energy storage performance10.1016/j.jechem.2024.01.019 ↗
50. Integrated micro space electrostatic field in aqueous Zn‐ion battery: scalable electrospray fabrication of porous crystalline anode coating10.1002/ange.202300125 ↗