Investigation of the effect of particle size of commercial aluminum powder on discharge performance of the anode of aluminum-air battery prepared by hot press sintering
Source abstract
Abstract
In this study, commercially 1060 aluminum powders with median particle sizes of 20 μm, 25 μm, 50 μm and 100 μm are utilized as the matrix material to fabricate anodic samples of aluminum-air batteries through hot pressing sintering technique. This research explores the effect of grain size on battery discharge performance. The experimental outcomes indicate that the anode`s discharge capacity diminishes progressively as grain size increases. At 25°C, the peak power density of the battery model declines from 257 mW/cm 2 at 20 μm to 195 mW/cm 2 at 100 μm. The constant current discharge tests exhibit that the discharge energy density and energy efficiency of the anodes increase as the current density increases from 60 mA/cm 2 to 150 mA/cm 2. The highest energy efficiency of 33.15% appears at 150 mA/cm 2 for the anode of 20 μm particle size while the lowest energy efficiency of 17.32% occurs at 60 mA/cm 2 for the anode of 100 μm particle size. Interestingly, the rates of hydrogen evolution and self-corrosion first decreased and then increased, with a notable transition at 50 μm. Microscopic observations revealed that the number of grain boundaries per unit area escalated with decreasing grain size, offering enhanced pathways for electrochemical and discharge reactions. The corrosion morphology varied from uniform pitting at smaller grain sizes to heterogeneous delamination at larger sizes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Aluminum-air batteries: current advances and promises with future directions10.1039/D4RA02219J ↗
2. Metal-air batteries: a review on current status and future applications10.1016/j.pnsc.2023.05.007 ↗
3. A review of the Al-gas batteries and perspectives for a “Real” Al-air battery10.1016/j.jpowsour.2023.233375 ↗
4. Aluminum batteries: opportunities and challenges
5. Metal-air batteries: progress and perspective10.1016/j.scib.2022.11.027 ↗
6. Recent advancement of electrically rechargeable di-trivalent metal-air batteries for future mobility
7. Field-assisted metal-air batteries: recent progress, mechanisms, and challenges10.1016/j.nanoen.2024.109550 ↗
8. Sustainable aqueous metal-air batteries: an insight into electrolyte system10.1016/j.ensm.2022.08.032 ↗
9. Research progress on biomass carbon as the cathode of a metal-air battery10.1016/S1872-5805(23)60784-X ↗
10. Aqueous metal-air batteries: fundamentals and applications10.1016/j.ensm.2019.12.011 ↗
11. Development of aqueous magnesium-air batteries: from structure to materials10.1016/j.jallcom.2024.174262 ↗
12. Research progress of Zn-air batteries suitable for extreme temperatures
13. Microstructure design of advanced magnesium-air battery anodes10.1016/j.jma.2024.01.025 ↗
14. A comprehensive review of cathode materials for Na-air batteries10.1039/D2YA00340F ↗
15. The path toward practical Li-air batteries10.1016/j.joule.2022.10.008 ↗
16. Aluminum batteries: unique potentials and addressing key challenges in energy storage10.1016/j.est.2024.111795 ↗
17. Aluminum-air batteries: a viability review10.1016/j.est.2020.101287 ↗
18. Interfacial design of Al electrode for efficient aluminum-air batteries: issues and advances
19. Aluminum-air batteries: a review of alloys, electrolytes and design10.1016/j.jpowsour.2021.229762 ↗
20. Quantifying an acceptable open-circuit corrosion current for aluminum-air batteries††Electronic supplementary information (ESI) available. See10.1039/D0MA01002B ↗
21. Aluminium alloys and composites for electrochemical energy systems10.1016/j.pmatsci.2024.101322 ↗
22. Synergistic construction of bifunctional interface film on anode via a novel hybrid additive for enhanced alkaline Al-air battery performance10.1016/j.cej.2022.138175 ↗
23. Discharge performance of Al-0.1Sn-0.1In-0.05Ga alloy for Al-air battery anodes10.1016/j.est.2023.110414 ↗
24. Influence of adding Mg, Sn and Ga on the discharge property of the Al-Sb anode for Al-air batteries10.1016/j.jallcom.2024.174986 ↗
25. Electrochemical performance of pure Al, Al-Sn, Al-Mg and Al-Mg-Sn anodes for Al-air batteries10.1016/j.jallcom.2019.151708 ↗
26. High energy efficiency and high discharge voltage of 2N-purity Al-based anodes for Al-air battery by simultaneous addition of Mn, Zn and Ga10.1016/j.jpowsour.2023.232845 ↗
27. Carbon treated commercial aluminium alloys as anodes for aluminium-air batteries in sodium chloride electrolyte10.1016/j.jpowsour.2016.06.118 ↗
28. Effect of Al-Ti-B master alloy on microstructure and properties of aluminum-air battery anode materials10.1016/j.jmrt.2023.11.024 ↗
29. Performance improvement for aluminum-air battery by using alloying anodes prepared from commercially pure aluminum10.1016/j.est.2023.108985 ↗
30. Discharge performance of the Al-Mg-Sn alloy anodes with different Sn content for Al-air batteries10.1016/j.jpowsour.2023.233236 ↗
31. Anode interfacial layer construction via hybrid inhibitors for high-performance Al-air batteries10.1021/acsami.1c14829 ↗
32. Exploring the effect of magnesium content on the electrochemical performance of aluminum anodes in alkaline batteries10.1016/j.electacta.2020.136497 ↗
33. Effect of Ga on microstructure and electrochemical performance of Al-0.4Mg-0.05Sn-0.03Hg alloy as anode for Al-air batteries10.1016/S1003-6326(21)65675-3 ↗
34. The role of microstructural evolution in improving energy conversion of Al-based anodes for metal-air batteries10.1016/j.jpowsour.2020.227806 ↗
35. The effect of grain size on aluminum anodes for Al-air batteries in alkaline electrolytes10.1016/j.jpowsour.2015.03.063 ↗
36. The role of hot extrusion in improving electrochemical properties of low-cost commercial Al alloy as anode for Al-air battery10.1016/j.jelechem.2022.116127 ↗
37. Friction stir processing induced elctrochemical performance improvement of commercial Al for Al-air battery10.1016/j.electacta.2020.136635 ↗
38. Enhancement of the discharge performance of Al-0.5Mg-0.1Sn-0.05Ga (wt.%) anode for Al-air battery by directional solidification technique and subsequent rolling process10.1016/j.jallcom.2020.154272 ↗
39. Effect of microstructure evolution on the discharge characteristics of Al-Mg-Sn-based anodes for Al-air batteries10.1016/j.jpowsour.2021.230928 ↗
40. Corrosion behaviour improvement from the ultrafine-grained Al-Zn-In alloys in Al-air battery10.1016/j.egyr.2022.03.132 ↗
41. Homogeneously dispersed graphene nanoplatelets as long-term corrosion inhibitors for aluminum matrix composites
42. Reversible passivation in primary aluminum-air batteries via composite anodes10.1016/j.ensm.2022.05.004 ↗
43. Effects of electrolyte components on properties of Al alloy anode10.1016/S1003-6326(08)60245-9 ↗
44. Effects of solid-solute magnesium and stannate ion on the electrochemical characteristics of a high-performance aluminum anode/electrolyte system10.1016/j.jpowsour.2018.11.019 ↗
45. The effect of crystal orientation on the aluminum anodes of the aluminum-air batteries in alkaline electrolytes10.1016/j.jpowsour.2015.08.095 ↗