journal article·2024-10

Tailoring N skeleton substituted cobalt phthalocyanine/reduced graphene oxide nanostructures for boosting redox kinetics and regulating Li2S nucleation enabled high rate performance of lithium-sulfur batteries

Zhanwei Xu, Jiaqi Zhao, Rongkun Lin, Jianfeng Huang, Xuetao Shen, Zhi Li

Publisher page

Abstract

The shuttle and sluggish conversion kinetics of polysulfides (LiPS) significantly hinder the sulfur utilization and cycle performance of Li–S batteries. Herein, reduced Graphene Oxide supported Cobalt phthalocyanines(CoPc/rGO) and its skeleton Nitrogen substituent Cobalt Tetrapyridinoporphyrazine (CoTAP/rGO), are fabricated using a preform-solid synthesis process. When employed as separator modification, the CoTAP/rGO can capture and electrocatalyze LiPS by the active central Co–N 4 units. And the Co–N 4 sites are proved that can augment the LiPS redox kinetics especially the oxidation as well as the Li + diffusion rate. The introduced substituent N atoms in the skeleton match the LiPS redox ability and further enhance the Li + diffusion ability. Distribution of relaxation time (DRT) analysis shows that CoTAP nanoparticles can reduce the resistance of LiPS as well as Li + diffusion in Li 2S precipitation procedure, accomplishing the loose three dimension deposition on cathode. As a result, the CoTAP/rGO separator exhibits a high initial capacity of 1132.7 mAh g −1 at 0.2C, excellent rate capacity of 672.5 mAh g −1 at 5C and superior long-term stability with a low capacity decay of 0.57 ‰ at 2C after 500 cycles.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Triple-layered carbon-SiO2 composite membrane for high energy density and long cycling Li-S batteries10.1021/acsnano.9b01703 ↗
2. Electrostatic potential-induced Co-N4 active centers in a 2D conductive metal-organic framework for high-performance lithium-sulfur batteries10.1021/acsami.2c13543 ↗
3. Thiophilic-lithiophilic hierarchically porous membrane-enabled full lithium-sulfur battery with a low N/P ratio10.1021/acsami.2c03160 ↗
4. Integrating energy band alignment and oxygen vacancies engineering of TiO2 anatase/rutile homojunction for kinetics‐enhanced Li–S batteries10.1002/adfm.202305788 ↗
5. Graphene quantum dots as sulfiphilic and lithiophilic mediator toward high stability and durable life lithium-sulfur batteries10.1016/j.jechem.2023.06.030 ↗
6. Co3O4 nanoneedle arrays as a multifunctional “super-reservoir” electrode for long cycle life Li–S batteries10.1039/C6TA07202J ↗
7. Cobalt(II)‐Centered fluorinated phthalocyanine‐sulfur SNAr chemistry for robust lithium–sulfur batteries with superior conversion kinetics10.1002/adfm.202106679 ↗
8. Bifunctional separator with ultra-lightweight MnO2 coating for highly stable lithium-sulfur batteries10.1021/acsami.2c20461 ↗
9. Niobium diboride nanoparticles accelerating polysulfide conversion and directing Li2S nucleation enabled high areal capacity lithium-sulfur batteries10.1021/acsnano.2c01179 ↗
10. Robust electrocatalytic Li2S redox of Li-S batteries facilitated by rationally fabricated dual-defects10.1002/smll.202204183 ↗
11. Self-supporting multicomponent hierarchical network aerogel as sulfur anchoring-catalytic medium for highly stable lithium-sulfur battery10.1002/smll.202205163 ↗
12. Kinetically favorable Li–S battery electrolytes10.1021/acsenergylett.3c00826 ↗
13. A radical pathway and stabilized Li anode enabled by halide quaternary ammonium electrolyte additives for lithium-sulfur batteries10.1002/anie.202309046 ↗
14. First‐principles investigations to evaluate NiCl2/NiF2 as cycle‐catalyzed electrolyte additives to improve Li–S batteries' performance
15. Synthesis of the Ni2P-Co mott-Schottky junction as an electrocatalyst to boost sulfur conversion kinetics and application in separator modification in Li-S batteries10.1021/acsami.2c19735 ↗
16. Bimetallic Ni–Co MOF@PAN modified electrospun separator enhances high-performance lithium-sulfur batteries10.1016/j.jechem.2023.03.017 ↗
17. Multifunctional atomic molybdenum on Graphene with distinctive coordination to solve Li and S electrochemistry10.1002/smll.202203947 ↗
18. Defect-rich single atom catalyst enhanced polysulfide conversion kinetics to upgrade performance of Li-S batteries10.1002/smll.202204880 ↗
19. Transition metal d-band center tuning by interfacial engineering to accelerate polysulfides conversion for robust lithium-sulfur batteries10.1002/smll.202205158 ↗
20. Free-standing TiO2 nanograssy tubular hybrid membrane for polysulfide trapping in Li-S battery10.1039/D3RA00349C ↗
21. A freestanding MoO2-decorated carbon nanofibers interlayer for rechargeable lithium sulfur battery10.1002/er.4334 ↗
22. Facile microwave-impulse synthesis of multifunctional rGO/MoS2/MoO2 composites as a permselective separator-coating layer for Li–S batteries10.1021/acsaem.1c02148 ↗
23. N-doping induced lattice expansion of 1D template confined ultrathin MoS2 sheets to significantly enhance lithium polysulfides redox kinetics for Li-S battery
24. Efficient regulation of polysulfides by MoS2/MoO3 heterostructures for high-performance Li-S batteries10.1002/smll.202206083 ↗
25. CoS2 and FeS2 nanoparticles embedded in carbon polyhedrons for lithium–sulfur batteries10.1021/acsanm.3c00777 ↗
26. Regulating electrochemical kinetics of CoP by incorporating oxygen on surface for high-performance Li-S batteries
27. Revealing the multifunctional electrocatalysis of indium‐modulated phthalocyanine for high‐performance lithium‐sulfur batteries
28. Porphyrin- and phthalocyanine-based systems for rechargeable batteries10.1016/j.ensm.2022.08.022 ↗
29. Enhanced polysulfide redox kinetics electro-catalyzed by Cobalt phthalocyanine for advanced lithium–sulfur batteries10.1039/C8TA04890H ↗
30. Enhancing polysulfide confinement and electrochemical kinetics by amorphous Cobalt phosphide for highly efficient lithium-sulfur batteries10.1021/acsnano.0c07038 ↗
31. A high-efficiency CoSe electrocatalyst with hierarchical porous polyhedron nanoarchitecture for accelerating polysulfides conversion in Li-S batteries10.1002/adma.202002168 ↗
32. Catalytic hexadecachlorophthalocyanine cobalt-coated host materials for Li–S batteries10.1021/acsaem.1c01078 ↗
33. A multifunctional separator based on dilithium tetraaminophthalocyanine self-assembled on rGO with improved cathode and anode performance in Li–S batteries10.1016/j.carbon.2022.09.030 ↗
34. Cobalt(II) tetraaminophthalocyanine-modified multiwall carbon nanotubes as an efficient sulfur redox catalyst for lithium-sulfur batteries10.1002/cssc.202000648 ↗
35. Recent advances in electrocatalysis with phthalocyanines10.1039/D0CS01605E ↗
36. Space-confined construction of nitrogen-rich Cobalt porphyrin-derived nanoparticulates anchored on activated carbon for high-current lithium thionyl chloride battery10.1016/j.electacta.2020.136543 ↗
37. Layer-by-Layer assembly of CeO(2-x)@C-rGO nanocomposites and CNTs as a multifunctional separator coating for highly stable lithium-sulfur batteries10.1021/acsami.2c03461 ↗
38. In situ separator modification with an N-rich conjugated microporous polymer for the effective suppression of polysulfide shuttle and Li dendrite growth10.1021/acsami.2c15812 ↗
39. Enhanced catalytic activity in nitrogen-anion modified metallic Cobalt disulfide porous nanowire arrays for hydrogen evolution10.1021/acscatal.7b02218 ↗
40. Coordination effect of network NiO nanosheet and a carbon layer on the cathode side in constructing a high-performance lithium–sulfur battery10.1039/C8TA00270C ↗
41. Single-dispersed polyoxometalate clusters embedded on multilayer Graphene as a bifunctional electrocatalyst for efficient Li-S batteries10.1038/s41467-021-27866-5 ↗
42. Enhanced PERFORMANce of Li‐S battery by constructing inner conductive network and outer adsorption layer sulfur‐carbon composite10.1002/er.6220 ↗
43. MXene derivative Ta4C3-Ta2O5 heterostructure as Bi-functional barrier for Li-S batteries10.1016/j.jmst.2022.11.059 ↗
44. Enhanced electrochemical kinetics with highly dispersed conductive and electrocatalytic mediators for lithium-sulfur batteries10.1002/adma.202100810 ↗
45. Porous nanofibers comprising VN nanodots and densified N-doped CNTs as redox-active interlayers for Li–S batteries10.1016/j.jpowsour.2023.232632 ↗
46. Direct trapping and rapid conversing of polysulfides via a multifunctional Nb2O5-cnt catalytic layer for high performance lithium-sulfur batteries10.1016/j.carbon.2020.10.022 ↗
47. Engineering the conductive network of metal oxide‐based sulfur cathode toward efficient and longevous lithium–sulfur batteries10.1002/aenm.202002076 ↗
48. Nbn nanodot decorated N-doped Graphene as a multifunctional interlayer for high-performance lithium–sulfur batteries10.1039/D2TA01364A ↗
49. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
50. The timescale identification decoupling complicated kinetic processes in lithium batteries10.1016/j.joule.2022.05.005 ↗
51. Structure-conduction correlations in a chlorine-rich superionic lithium-argyrodite solid electrolyte: a drt analysis10.1016/j.jpowsour.2023.233579 ↗
52. Lithium-sulfur battery diagnostics through distribution of relaxation times analysis10.1016/j.ensm.2022.06.016 ↗
53. Regulating the molecular interactions in polymer binder for high-performance lithium-sulfur batteries10.1021/acsnano.2c03059 ↗
54. Boosting polysulfide catalytic conversion and facilitating Li+ transportation by ion-selective COFs composite nanowire for Li-S batteries
55. Sulfur-doped hollow C@CoP nanosphere modified separator for enhancing polysulfides anchoring and conversion in Li–S batteries10.1016/j.jpowsour.2023.233382 ↗
56. Solvent-mediated Li2S electrodeposition: a critical manipulator in lithium-sulfur batteries
57. A review of the analysis of Multiple nucleation with diffusion controlled growth10.1016/S0022-0728(03)00250-X ↗
58. Designing electrochemical nanoreactors to accelerate Li2S1/2three-dimensional growth process and generating more Li2S for advanced Li–S batteries10.31635/renewables.023.202200015 ↗
59. Unraveling the dual functionality of high‐donor‐number anion in lean‐electrolyte lithium‐sulfur batteries
60. High-entropy MXene as bifunctional mediator toward advanced Li−S full batteries10.1021/acsnano.3c10731 ↗