journal article·2024-09

Pitch-based quasi-dry thick electrode fabrication process of NCM cathode for lithium-ion batteries

Dabin Park, Seokhui Kim, Seounghun Ha, Yoon Hwa, Juhyeong Kim, Jinwoo Park, Yoonkook Son

Publisher page

Abstract

In response to the demand for high-energy-density energy storage devices, the development of thick electrodes for lithium-ion batteries (LIB) is crucial in earnest to improve energy density. In this study, a new electrode fabrication process is developed, using a modified pitch as a binder, which produces a dough-like composite of electrode constituents with a significantly reduced amount of processing solvent. Modified pitch, which can be obtained by reaction pitch with the slightest amount of N-Methyl-2-Pyrrolidone (NMP), improves the physical properties of thick electrodes through nanoscale variations. High areal loading lithium nickel cobalt manganese oxides (NCM) electrodes of up to 75.1 mg cm −2 (305.1 μm) fabricated through a simple roll-to-roll process show stable charge-discharge cycling performance. Conventionally, the relatively low areal loading of wet-slurry-based NCM electrodes (18.3 mg cm −2, 148.9 μm) induces poor mechanical properties due to the solvent drying process. On the other hand, we confirm the feasibility of pitch as a binder material for fabricating thick electrodes and the excellence of the dough-like system process.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Opportunities and challenges of lithium ion batteries in automotive applications10.1021/acsenergylett.0c02584 ↗
2. A review of lithium-ion battery safety concerns: the issues, strategies, and testing standards10.1016/j.jechem.2020.10.017 ↗
3. 30 Years of lithium‐ion batteries10.1002/adma.201800561 ↗
4. Challenges, laser processing and electrochemical characteristics on application of ultra-thick electrode for high-energy lithium-ion battery10.1016/j.jpowsour.2020.228948 ↗
5. Design of scalable, next-generation thick electrodes: opportunities and challenges10.1021/acsnano.1c09687 ↗
6. Performance enhancement of Li-ion battery by laser structuring of thick electrode with low porosity10.1016/j.jiec.2018.10.012 ↗
7. High-voltage “single-crystal” cathode materials for lithium-ion batteries10.1021/acs.energyfuels.0c03608 ↗
8. Thick electrode batteries: principles, opportunities, and challenges10.1002/aenm.201901457 ↗
9. Toward low-cost, high-energy density, and high-power density lithium-ion batteries
10. How electrode thicknesses influence performance of cylindrical lithium-ion batteries10.1016/j.est.2021.103827 ↗
11. High C-rate performance of LiFePO4/carbon nanofibers composite cathode for Li-ion batteries10.1016/j.cap.2019.09.014 ↗
12. Achieving high energy density for lithium-ion battery anodes by Si/C nanostructure design10.1039/C8TA10936B ↗
13. Solvent-free fabrication of thick electrodes in thermoplastic binders for high energy density lithium-ion batteries10.3390/nano12193320 ↗
14. Ultrahigh-capacity and fire-resistant LiFePO4-based composite cathodes for advanced lithium-ion batteries10.1002/aenm.201802930 ↗
15. Thickness-independent capacitance of vertically aligned liquid-crystalline MXenes10.1038/s41586-018-0109-z ↗
16. Thick binder-free electrodes for Li–ion battery fabricated using templating approach and spark plasma sintering reveals high areal capacity10.1002/aenm.201703031 ↗
17. The role of graphene for electrochemical energy storage10.1038/nmat4170 ↗
18. Silicon–carbon nanotube coaxial sponge as Li‐ion anodes with high areal capacity10.1002/aenm.201100056 ↗
19. Carbon nanotubes for lithium-ion batteries10.1039/b904116h ↗
20. Effect of organic binder segregation on sintered strength of dry‐pressed alumina10.1111/j.1551-2916.2006.01057.x ↗
21. Critical electrode properties and drying conditions causing component segregation in graphitic anodes for lithium-ion batteries10.1016/j.est.2018.06.009 ↗
22. Fabrication of binder pitches allowing for low-temperature formation and high coking values and examination of mechanical properties of artificial graphite blocks made of binder pitches10.1021/acsomega.1c06750 ↗
23. Thick electrodes for high energy lithium ion batteries10.1149/2.0401507jes ↗
24. Ultrahigh loading dry-process for solvent-free lithium-ion battery electrode fabrication10.1038/s41467-023-37009-7 ↗
25. Battery materials for low-cost electric transportation10.1016/j.mattod.2020.09.027 ↗
26. High‐performance, low‐cost, and dense‐structure electrodes with high mass loading for lithium‐ion batteries10.1002/adfm.201903961 ↗
27. A novel organosilicon-type binder for LiCoO2 cathode in Li-ion batteries10.1016/j.ensm.2022.04.005 ↗
28. Highly elastic binder for improved cyclability of nickel-rich layered cathode materials in lithium-ion batteries10.1002/aenm.202001069 ↗
29. Preparation and characterization of mesophase formation of pyrolysis fuel oil-derived binder pitches for carbon composites10.1016/j.compositesb.2019.01.102 ↗
30. Preparation of petroleum impregnating pitches from pyrolysis fuel oil using two-step heat treatments10.1007/s42823-019-00041-z ↗
31. Recommended terminology for the description of carbon as a solid (IUPAC Recommendations 1995)10.1351/pac199567030473 ↗
32. Effect of kneading and carbonization temperature on the structure of the carbon block for thermally conductive bulk graphites10.1007/s42823-021-00288-5 ↗
33. Control of the properties of a binder pitch to enhance the density and strength of graphite blocks10.1007/s42823-023-00515-1 ↗
34. Improvement of capacitor performance by pitch-based binder for a new alternative to polymer binders
35. Ultrahigh loading dry-process for solvent-free lithium-ion battery electrode fabrication10.1038/s41467-023-37009-7 ↗
36. Scalable dry processing of binder-free lithium-ion battery electrodes enabled by holey graphene10.1021/acsaem.9b00066 ↗
37. The effect of uncompensated IR-drop on polarization resistance measurements10.5006/0010-9312-32.4.143 ↗
38. Carbon-binder migration: a three-dimensional drying model for lithium-ion battery electrodes10.1016/j.ensm.2021.09.015 ↗
39. Binder migration during drying of lithium-ion battery electrodes: modelling and comparison to experiment10.1016/j.jpowsour.2018.04.097 ↗
40. Investigation of film solidification and binder migration during drying of Li-Ion battery anodes10.1016/j.jpowsour.2016.04.018 ↗
41. High-throughput and high-performance lithium-ion batteries via dry processing10.1016/j.cej.2023.144300 ↗
42. Solvent-free processed cathode slurry with carbon nanotube conductors for Li-ion batteries10.3390/nano13020324 ↗
43. Suitable cathode NMP replacement for efficient sustainable printed Li-ion batteries10.1021/acsaem.1c02923 ↗
44. Dry electrode manufacturing in a calendar: the role of powder premixing for electrode quality and electrochemical performance10.1021/acsaem.2c03755 ↗
45. Dry electrode technology, the rising star in solid-state battery industrialization10.1016/j.matt.2022.01.011 ↗
46. Perspectives on strategies and techniques for building robust thick electrodes for lithium-ion batteries10.1016/j.jpowsour.2022.232176 ↗
47. Drying of lithium-ion battery anodes for use in high-energy cells: influence of electrode thickness on drying time, adhesion, and crack formation10.1002/ente.201900722 ↗
48. 3D printing of customized Li‐ion batteries with thick electrodes10.1002/adma.201703027 ↗
49. Effects of oxidation process on thermal properties of petroleum-based isotropic pitch
50. Hydrodeoxygenation of stearic acid over zeolite–MOF composite-supported Pt catalysts10.1016/j.jiec.2023.07.044 ↗
51. The development of activated carbon from corncob for CO2 capture10.1039/D2RA05979G ↗
52. X-Ray photoelectron spectroscopy (XPS) investigation of nitrogen functionalities during coal char combustion in O2/CO2 and O2/Ar atmospheres10.1021/ef101134a ↗
53. Electrochemical performance and conductivity of N-doped carbon nanotubes annealed under various temperatures as cathode for lithium-ion batteries10.3390/met12122166 ↗
54. Synthesis of coal tar pitch-derived heteroatom-doped porous carbon materials for aqueous zinc-ion hybrid supercapacitors10.1016/j.crcon.2022.05.002 ↗
55. A review of strategies for the synthesis of N-doped graphene-like materials10.3390/nano10112286 ↗
56. Understanding capacity fading mechanism of thick electrodes for lithium-ion rechargeable batteries10.1016/j.jpowsour.2020.228369 ↗
57. An environment-friendly crosslinked binder endowing LiFePO4 electrode with structural integrity and long cycle life performance10.1039/D0RA05095D ↗
58. First application of nitrogen-doped carbon nanosheets derived from Lotus leaves as the electrode catalyst for Li-CO2/O2 battery10.3390/catal13030577 ↗