Performance analysis and optimization of syngas composition for reversible solid oxide fuel cells in dual-mode operation based on extreme learning machine
Source abstract
Abstract
Reversible solid oxide fuel cell (rSOC) is an efficient means of converting chemical energy into electrical energy, offering a promising solution to the imbalance between energy production and consumption. The performance of rSOC in dual-mode operation, utilizing syngas as fuel, is significantly influenced by variations in fuel composition. This study aims to develop an rSOC model using Aspen Plus and the extreme learning machine (ELM) algorithm to evaluate the impact of different fuel compositions on stack performance in both solid oxide fuel cell (SOFC) and solid oxide electrolytic cell (SOEC) modes. Results indicate that the concentrations of H 2 and H 2 O are critical for optimal performance in dual-mode operation. Additionally, the water gas shift (WGS) reaction is employed to modify syngas composition for improved performance. When the molar fraction of H 2/H 2O is maintained between 50 % and 60 %, the rSOC achieves a maximum round-trip efficiency of 67.5 %. The optimal syngas composition, with H 2/H 2O/CO 2/CO ratios of 50/5/35/10, can reach a maximum round-trip efficiency of 68.5 %. This study provides theoretical insights into the selection of syngas composition for rSOC in dual-mode operation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Fossil fuel sustainability index: an application of resource management10.1016/j.enpol.2006.10.011 ↗
2. Design and optimization of hydrogen production by solid oxide electrolyzer with marine engine waste heat recovery and ORC cycle10.1016/j.enconman.2020.113775 ↗
3. Development and modelling of a novel electricity-hydrogen energy system based on reversible solid oxide cells and power to gas technology10.1016/j.ijhydene.2019.09.028 ↗
4. Thermodynamic investigation of an integrated near-zero CO2 emission power generation system with SOFC, MGT, SCO2BC, and CO2 capture10.1016/j.psep.2023.12.016 ↗
5. Current developments in reversible solid oxide fuel cells10.1016/j.rser.2016.03.005 ↗
6. Influence of pressure on solid oxide electrolysis cells investigated by experimental and modeling approach10.1016/j.ijhydene.2015.07.099 ↗
7. Simulation of a reversible SOFC with Aspen Plus10.1016/j.ijhydene.2017.01.189 ↗
8. Online gas composition estimation in solid oxide fuel cell systems with anode off-gas recycle configuration10.1016/j.jpowsour.2017.01.038 ↗
9. Multi-fuel capability of solid oxide fuel cells10.1007/s10832-004-5174-z ↗
10. Production of synthetic fuels by Co-electrolysis of steam and carbon dioxide10.1080/15435070903372577 ↗
11. Reactions and mass transport in high temperature co-electrolysis of steam/CO2 mixtures for syngas production10.1016/j.jpowsour.2015.01.083 ↗
12. Reversible operation of solid oxide cells under electrolysis and fuel cell modes: experimental study and model validation10.1016/j.cej.2015.03.096 ↗
13. Modeling mass transfer in solid oxide fuel cell anode: II. H2/CO co-oxidation and surface diffusion in synthesis-gas operation10.1016/j.jpowsour.2016.05.088 ↗
14. Mechanism for reversible CO/CO2 electrochemical conversion on a patterned nickel electrode10.1016/j.jpowsour.2017.09.019 ↗
15. The effect of synthesis gas composition on the performance of Ni-based solid oxide fuel cells10.1016/j.cherd.2015.07.008 ↗
16. Experimental characterization and modeling of the electrochemical reduction of CO2 in solid oxide electrolysis cells10.1016/j.electacta.2012.10.107 ↗
17. Carbon deposition thresholds on nickel-based solid oxide fuel cell anodes II. Steam: carbon ratio and current density10.1016/j.jpowsour.2014.07.084 ↗
18. Experimental and modeling study of solid oxide fuel cell operating with syngas fuel10.1016/j.jpowsour.2006.03.080 ↗
19. Modeling of a solid oxide electrolysis cell for carbon dioxide electrolysis10.1016/j.cej.2010.08.032 ↗
20. CFD modeling and performance comparison of solid oxide fuel cell and electrolysis cell fueled with syngas10.1002/er.4315 ↗
21. Syngas production by high temperature steam/CO2 coelectrolysis using solid oxide electrolysis cells10.1039/C5FD00017C ↗
22. Performance characterization and modelling of syngas-fed SOFCs (solid oxide fuel cells) varying fuel composition10.1016/j.energy.2015.07.126 ↗
23. Modelling of solid oxide electrolyser cell using extreme learning machine10.1016/j.electacta.2017.08.113 ↗
24. Towards online optimisation of solid oxide fuel cell performance: combining deep learning with multi-physics simulation10.1016/j.egyai.2020.100003 ↗
25. Densely connected deep extreme learning machine algorithm10.1007/s12559-020-09752-2 ↗
26. Dynamic modelling and performance analysis of reversible solid oxide fuel cell with syngas10.1016/j.ijhydene.2019.01.068 ↗
27. Co-electrolysis of steam and carbon dioxide in solid oxide cells10.1149/2.076208jes ↗
28. Model validation and performance analysis of regenerative solid oxide cells for energy storage applications: reversible operation10.1016/j.ijhydene.2014.01.186 ↗
29. Modelling and performance evaluation of solid oxide fuel cell for Building integrated Co‐and Polygeneration10.1002/fuce.200900082 ↗
30. Parametric study of solid oxide steam electrolyzer for hydrogen production10.1016/j.ijhydene.2007.03.001 ↗
31. Simulation of a tubular solid oxide fuel cell stack using AspenPlusTM unit operation models10.1016/j.enconman.2004.03.002 ↗
32. A multi-generation system for hydrogen production through the high-temperature solid oxide electrolyzer integrated to 150 MW coal-fired steam boiler10.1016/j.fuel.2022.123201 ↗
33. A macro-level model for determining the performance characteristics of solid oxide fuel cells10.1016/j.jpowsour.2004.06.051 ↗
34. A simple model for solid polymer electrolyte (SPE) water electrolysis10.1016/j.ssi.2004.01.076 ↗
35. A detailed techno-economic analysis of heat integration in high temperature electrolysis for efficient hydrogen production10.1016/j.ijhydene.2014.10.048 ↗
36. Three-dimensional numerical simulation for various geometries of solid oxide fuel cells10.1016/0378-7753(95)02269-4 ↗
37. Production of synthetic fuels by co-electrolysis of steam and carbon dioxide10.1080/15435070903372577 ↗
38. Performance evaluation of combined solid oxide fuel cells with different electrolytes10.1016/j.ijhydene.2010.02.057 ↗
39. Analysis of a proton-conducting SOFC with direct internal reforming10.1016/j.ces.2009.06.066 ↗
40. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance10.1016/j.jpowsour.2004.06.040 ↗
41. Flowsheet-based model and exergy analysis of solid oxide electrolysis cells for clean hydrogen production10.1016/j.jclepro.2017.09.127 ↗
42. A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness10.1016/S0378-7753(00)00556-5 ↗
43. A modeling study on concentration overpotentials of a reversible solid oxide fuel cell10.1016/j.jpowsour.2006.09.024 ↗
44. Enhanced performance of solid oxide electrolysis cells by integration with a partial oxidation reactor: energy and exergy analyses10.1016/j.enconman.2016.10.023 ↗
45. A novel solid oxide electrolysis cell (SOEC) to separate anodic from cathodic polarization under high electrolysis current10.1016/j.ijhydene.2015.05.143 ↗
46. Achieving high-efficiency hydrogen production using planar solid-oxide electrolysis stacks10.1016/j.ijhydene.2014.05.070 ↗
47. An electrochemical model for syngas production by co-electrolysis of H2O and CO210.1016/j.jpowsour.2011.11.080 ↗
48. Neural network model of 100 W portable PEM fuel cell and experimental verification10.1016/j.ijhydene.2010.05.124 ↗
49. Dynamic performance of a high-temperature PEM fuel cell–an experimental study10.1016/j.energy.2015.07.026 ↗
50. Modeling and performance optimization of a solid oxide electrolysis system for hydrogen production10.1016/j.apenergy.2018.04.124 ↗
51. Process modeling of a reversible solid oxide cell (r-SOC) energy storage system utilizing commercially available SOC reactor
52. Numerical analysis of the possibility of carbon formation in planar SOFC fueled with syngas10.1115/1.4005625 ↗
53. A thermodynamic approach for selecting operating conditions in the design of reversible solid oxide cell energy systems10.1016/j.jpowsour.2015.09.093 ↗
54. Catalytic autothermal reforming of methane and propane over supported metal catalysts10.1016/S0926-860X(02)00471-4 ↗